Question Update! Using miflash flash official rom and it still stuck in fastboot

[joemou]

Hi there can anyone help me?

i have problem a with my phone which is mi 11. my phone stuck at fastboot even at mi flash it successful flash .. i have tried many way but still cant solve the problem.

My phone has already unlock bootloader and it is China version. All rom I have tested to flash are Chinese version rom

Update:

The word below is guess

I found the situation not just happened on me. There are several people also happened. We guess which result from Android new method (A/B-capable bootloaders). Since this new way when you flash Eu or other rom , you may have opportunity to block your phone.

 

[luuxis]

Hi there can anyone help me?

i have problem a with my phone which is mi 11. my phone stuck at fastboot even at mi flash it successful flash .. i have tried many way but still cant solve the problem.

My phone has already unlock bootloader and it is China version. All rom I have tested to flash are Chinese version rom
View attachment 5234965

hello i can help you to solve your problem

first I need to have two or three little pieces of information

you have the problem with your phone following what manipulation

 

[joemou]

Hi! Thanks your reply

At first I wanna flash eu rom to my chinese version Mi11. Howerver I input wrong

hello i can help you to solve your problem

first I need to have two or three little pieces of information

you have the problem with your phone following what manipulation

Hi! Really thanks your reply


At first I wanted to flash eu rom to my chinese version already unlocked Mi11. Howerver I input wrong
command ./windows_fastboot_update_rom.bat and it started fastboot loop.
After that I tried to input correct one
./windows_fastboot_first_install_with_data_format.bat
But never work.

So I searched tutorial on internet and tried to use miflash back to official chinese rom V12.0.22.0. I use miflash flash this rom with clean and lock. It display success on miflash but still cannot get out fastboot loop. Then I unlock again and flash again with different version official Chinese rom. All success All fastboot loop. I am really despair now.

 

[JamesLiu0802]

Hi! Really thanks your reply


At first I wanted to flash eu rom to my chinese version already unlocked Mi11. Howerver I input wrong
command ./windows_fastboot_update_rom.bat and it started fastboot loop.
After that I tried to input correct one
./windows_fastboot_first_install_with_data_format.bat
But never work.

So I searched tutorial on internet and tried to use miflash back to official chinese rom V12.0.22.0. I use miflash flash this rom with clean and lock. It display success on miflash but still cannot get out fastboot loop. Then I unlock again and flash again with different version official Chinese rom. All success All fastboot loop. I am really despair now.

When the computer is connected to the mobile phone(fastboot), click on the .bat directly with the mouse.

 

[joemou]

When the computer is connected to the mobile phone(fastboot), click on the .bat directly with the mouse.

Yah I have tried many times but not working

 

[joemou]

Unbrick via edl 9008

Www.facebook.com/shipmobie

I know that but if I do so I need to ask somebody help me, I don't have the official account

 

[luuxis]

Hi! Really thanks your reply


At first I wanted to flash eu rom to my chinese version already unlocked Mi11. Howerver I input wrong
command ./windows_fastboot_update_rom.bat and it started fastboot loop.
After that I tried to input correct one
./windows_fastboot_first_install_with_data_format.bat
But never work.

So I searched tutorial on internet and tried to use miflash back to official chinese rom V12.0.22.0. I use miflash flash this rom with clean and lock. It display success on miflash but still cannot get out fastboot loop. Then I unlock again and flash again with different version official Chinese rom. All success All fastboot loop. I am really despair now.

ok i think i can help you fix your phone

you will download the EEA global rom

https://bigota.d.miui.com/V12.0.3.0.RKBEUXM/venus_eea_global_images_V12.0.3.0.RKBEUXM_20210206.0000.00_11.0_eea_6367a5651f.tgz

and you will force the restart in fastboot mode of your phone (power button + volume down)

you will download android tool platforms (ADB FASTBOOT)
https://developer.android.com/studio/releases/platform-tools
you will extract the archive and you will open a terminal in the folder containing the file fastboot.exe
you will run the following command
fastboot set_active a

once done you will force your phone to restart in fastboot mode
once done you will flash your phone on the global EEA rom using the mi flash tool https://www.xiaomiflash.com/

 

[joemou]

ok i think i can help you fix your phone

you will download the EEA global rom

https://bigota.d.miui.com/V12.0.3.0.RKBEUXM/venus_eea_global_images_V12.0.3.0.RKBEUXM_20210206.0000.00_11.0_eea_6367a5651f.tgz

and you will force the restart in fastboot mode of your phone (power button + volume down)

you will download android tool platforms (ADB FASTBOOT)
https://developer.android.com/studio/releases/platform-tools
you will extract the archive and you will open a terminal in the folder containing the file fastboot.exe
you will run the following command
fastboot set_active a

once done you will force your phone to restart in fastboot mode
once done you will flash your phone on the global EEA rom using the mi flash tool https://www.xiaomiflash.com/

Hi thanks for the reply

I didnt input your fastboot command because I checked my current slot which already is A and I had tried to flash rom which is still fastboot loop. Hence, should I change to slot B to flash the rom?

Really appreciate your helping. I found the problem no just happen on me. There are many people also stuck in same situation since flashing the EU rom. Hope you can help us get through it. Thanks again

 

[joemou]

ok i think i can help you fix your phone

you will download the EEA global rom

https://bigota.d.miui.com/V12.0.3.0.RKBEUXM/venus_eea_global_images_V12.0.3.0.RKBEUXM_20210206.0000.00_11.0_eea_6367a5651f.tgz

and you will force the restart in fastboot mode of your phone (power button + volume down)

you will download android tool platforms (ADB FASTBOOT)
https://developer.android.com/studio/releases/platform-tools
you will extract the archive and you will open a terminal in the folder containing the file fastboot.exe
you will run the following command
fastboot set_active a

once done you will force your phone to restart in fastboot mode
once done you will flash your phone on the global EEA rom using the mi flash tool https://www.xiaomiflash.com/

Sadly, flashing the rom in slot B is still not work...

Hope someone can solve the problem

 

[xdamami]

So can you open recovery? If yes try to reset device i don't remember exactly how on stock roms but if you can open recovery just reset device than try reboot. If no luck do it again than directly open fastboot mode and flash rom again.

 

[[email protected]]

Sadly, flashing the rom in slot B is still not work...

Hope someone can solve the problem

Try to flash the rom through the following procedure:
Download the attach FlashRom.zip and extract it. You will have a folder FlashRom. In this folder there is an images folder. You need to download a stable Global or CN rom in the zip format. Extract the payload.bin from the rom.zip and use payload_dumper-win64 to extract the images file from the payload.bin. Put all of these images files (they are in the payload_output). Then click on the "windows_fastboot_first_install_with_data_format.bat" file. The images files will be flashed and see if it works.

I used this method to flash both global and CN rom without problem. Of course I do not have your problem.

 

[[email protected]]

Sadly, flashing the rom in slot B is still not work...

Hope someone can solve the problem

Make sure you have the following images before you use the flashRom:
abl.img
aop.img
bluetooth.img
boot.img
cpucp.img
devcfg.img
dsp.img
dtbo.img
featenabler.img
filename.txt
hyp.img
imagefv.img
keymaster.img
modem.img
odm.img
product.img
qupfw.img
shrm.img
system.img
system_ext.img
tz.img
uefisecapp.img
vbmeta.img
vbmeta_system.img
vendor.img
vendor_boot.img
vm-bootsys.img
xbl.img
xbl_config.img

Ignore any message display on the screen until you see the word "Done". After this display, if it works the phone will boot. It will take about 15-20 minutes.

 

[zencooler]

Try to flash the rom through the following procedure:
Download the attach FlashRom.zip and extract it. You will have a folder FlashRom. In this folder there is an images folder. You need to download a stable Global or CN rom in the zip format. Extract the payload.bin from the rom.zip and use payload_dumper-win64 to extract the images file from the payload.bin. Put all of these images files (they are in the payload_output). Then click on the "windows_fastboot_first_install_with_data_format.bat" file. The images files will be flashed and see if it works.

I used this method to flash both global and CN rom without problem. Of course I do not have your problem.

Thanks for this quick guide.
Does this method need the bootloader to be unlocked?
Will it work if I extract images from Global EEA rom and flash them on Chinese Mi 11?
Thanks in advanc for the reply. Regards!

 

[luuxis]

Thanks for this quick guide.
Does this method need the bootloader to be unlocked?
Will it work if I extract images from Global EEA rom and flash them on Chinese Mi 11?
Thanks in advanc for the reply. Regards!

yes the method requires that your bootloader is unlocker

 

[[email protected]]

Thanks for this quick guide.
Does this method need the bootloader to be unlocked?
Will it work if I extract images from Global EEA rom and flash them on Chinese Mi 11?
Thanks in advanc for the reply. Regards!

Yes, the bootloader must be unlocked. It will work if you extract images from Global EEA rom and flash them on Chinese Mi 11. I have a Chinese Mi 11 and I use this method to flash the Global EEA rom. I am now back to the Miui 12.5 beta rom using this method.

 

[joemou]

Try to flash the rom through the following procedure:
Download the attach FlashRom.zip and extract it. You will have a folder FlashRom. In this folder there is an images folder. You need to download a stable Global or CN rom in the zip format. Extract the payload.bin from the rom.zip and use payload_dumper-win64 to extract the images file from the payload.bin. Put all of these images files (they are in the payload_output). Then click on the "windows_fastboot_first_install_with_data_format.bat" file. The images files will be flashed and see if it works.

I used this method to flash both global and CN rom without problem. Of course I do not have your problem.

I think my fastboot broke. Seems cannot flash the rom. Perhaps sending back to repair is my only solution...

No matter what thanks your reply. I really appreciate that. Thanks!

 

[[email protected]]

I think my fastboot broke. Seems cannot flash the rom. Perhaps sending back to repair is my only solution...

No matter what thanks your reply. I really appreciate that. Thanks!

View attachment 5240137

Did you try to unbrich your phone using the following tool:

XiaoMiTool V2 - Modding of Xiaomi devices made easy for everyone

XiaoMiTool V2 is a easy to use tool to install rom on your Xiaomi device. Modding made easy for everyone! Download it for free now!

www.xiaomitool.com

 

[thfc5975]

I have the same issue, boatloader unlock on chinese import, have tried every flashtool and still stuck on fastboot screen. Phone shows up when I do fastboot devices. But cant get CMD to work in a folder as you have said above will only work from start menu

 

[thfc5975]

I get this message:

Erase successful, but not automatically formatting.