[Updated 2-11-2012] THE BEGINNERS (N00B) GUIDE!!! N00BS LOOK HERE FOR YOUR HOW TOs

[Swiftks]

V6 SuperCharger Script Install Instructions

Here are instructions to install the V6 SuperCharger Script. I'm running out of room in the OP, so I'll link to this post.

1) Download the most recent version of the script from the link below. Script/file should be "V6_SuperCharger_for_Android-update9_RCx.x.sh.pdf" (where x.x is the most recent build #).
http://forum.xda-developers.com/showthread.php?p=18703418#post18703418

2) Place the .pdf file on your micro sd card (default sdcard in CM7).

3) Download Script Manager

4) Open Script Manager, then go to -> Menue -> More -> Advanced Options -> Config -> Select Browse As Root. Then allow super user permission when you exit out.

5) Navigate to the supercharger .pdf file you have on your device in Script Manager.

6) Select the .pdf, and then check Run as Root

7) Navigate through the menu, selecting the speed (select slow, so you can read everything).

8) Select NO when asked for system integration of "init.rc"

9) Select #9, when asked for Option 1 - 30

10) After install, I exited out of Script Manager, and then rebooted.

11) After reboot, navigate to /system/etc/init.d, and delete "99SuperCharger script"

12) Use Script Manager, and navigate to /data, and select "99SuperCharger.sh", and check Run as Root & Run at Boot. Save. Then Exit. Then Reboot.

13) After reboot and launcher loads, you should see a message "Script Manager has been granted super user permission" pop up to let you know the script loaded.

Think that's it... make sure your not stoping script manager from loading at start up with auto start or some other app, that you may have disabled it to start script manager from loading at boot.

Here is a visual guide. The steps in this post may be different than the ones above; use this for a visual reference.
http://forum.xda-developers.com/showthread.php?t=1126940



UPDATE:

V6 SuperCharger has been updated to RC5. System integration is finally working, so there is no need to run script manager at boot anymore.

What I did:

- Use current V6 script to un-charge device (option #15)
*No need to reboot yet
- Download new V6 RC5 Script
http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
- Run new script with script manager (make sure to choose run as root in script manager options)
- Choose Yes for system integration
- I choose NO for useing old settings when it finds them
- Choose #9 for 1000+ HP SuperCharger.
- Choose Yes for reboot and cleanup (this will wipe you dalvik cache, so be patient on reboot)

If you had previously been using Script Manager to run your older version of V6, you may also want to:
- After reboot, go back to Script Manager, select Menu Burton -> List
- Select 99SuperCharger, then "delete config". This was the supercharger script you had been running at boot with script manager, on the previous supercharger version.
- Select your older versions of SuperCharger Script, then "delete config".
- Reboot. Script manager should no longer be running at boot; i.e. you should no longer see "Script Manager has been granted Super User Permission"
- Re-run the V6 script and confirm everything has been loaded and is working. When prompted for a option again, if you scroll up, you should see:

"Launcher is DIE-HARD...
SuperCharger ADJ Entires Found in local.prop!
OOM Groupings Fixes ARE in Effect!
Current Values MATCH Prior SuperCharge!
Current Minfrees = 8, 16, 200, 220, 240, 275 MB"

*Note: The script/settings are now intagrated and run at boot, however, the script is set to run 90 sec after the OS boots... so give it a minute before you go testing it.

 

[Foxer1]

Thanks, your first suggestion worked. Got Alien running now!

how do you delete the install-recovery file? i found is using root explorer but when I try to delete it says the file cannot be deleted because the file system is read-only...

 

[Swiftks]

how do you delete the install-recovery file? i found is using root explorer but when I try to delete it says the file cannot be deleted because the file system is read-only...

Need to press the R/W button in top right corner.

Sent from my MB860 using xda premium

 

[bago2045]

NOOB question on updating before unlock

Sorry if this has already been asked a million times, but I've been searching the forum for a few days and haven't found the answer (probably missed it),

I purchased a used Atrix recently. The phone hasn't been updated to 4.5.91 yet. Would I make my life more difficult if I update to 4.5.91 before unlock, or does it not matter at this point? I know it can be unlocked, but seeing the hardbrick notes I just want to be cautious.

 

[Swiftks]

Sorry if this has already been asked a million times, but I've been searching the forum for a few days and haven't found the answer (probably missed it),

I purchased a used Atrix recently. The phone hasn't been updated to 4.5.91 yet. Would I make my life more difficult if I update to 4.5.91 before unlock, or does it not matter at this point? I know it can be unlocked, but seeing the hardbrick notes I just want to be cautious.

Doesn't really matter. If you unlock, then update or update then unlock, you still won't be able to flash a earlier .sbf version without bricking. Actually, I'd probably OTA update first, then unlock, b/c I can't remember if the unlocking interferes from the OTA being able to install or not.

Truthfully, the point is really mute, b/c as soon as you unlock your bootloader, you can flash a gingerbread based ROM, without even being on gingerbread.

 

[piolos]

Great Job

incredible amount of information in one place

 

[bjpuhala]

Sticky indeed. I find this very helpful and return often.

 

[Gsmith10]

Much thanks for the guide! greatly helped!

 

[gauzak5]

Thank you for so good guide!
Maybe some info about undervolting could be added

 

[girishmadas]

dear frends hiii....i just bot atrix att&t unlocked running android version 2.2 so i want to upgrade 2.3.4 plz tell me way ...plz help

 

[Swiftks]

dear frends hiii....i just bot atrix att&t unlocked running android version 2.2 so i want to upgrade 2.3.4 plz tell me way ...plz help

unlocked carrier or unlocked bootloader?

 

[josephfranco926]

awesome and very informational! Many thanks!

 

[lebmb]

hey everyone, awesome thread, helped get things going for my nephews atrix
however i am unsure if it is an att one or not, he got it from someone and it had a UAE rom, froyo 2.2.2 ver 4.4.80 and i was wondering if there was any way to tell for sure which carrier or country it's for, maybe by serial number or something
cuz i am also curious about flashing radios on it, it has the 01.95.00R
I am in the US and on att and it seems to work ok even with H+ but it wasn't purchased from att
anyway any help is appreciated
thanks

 

[AtrixMaximus]

nice thred..really helpful

 

[mja2027]

romracers HELP

I tried "Now, choose "Install ROM from SD Card", and choose the .zip file that you saved on your internal storage. You should not need to delete any of the cache options. ROM Manager will reboot the device into CWM and flash the .zip automatically, and then reboot again".

Zip file does not show up as option. If I look at files it shows it as an .img file on phone????

 

[ghost_og]

I tried "Now, choose "Install ROM from SD Card", and choose the .zip file that you saved on your internal storage. You should not need to delete any of the cache options. ROM Manager will reboot the device into CWM and flash the .zip automatically, and then reboot again".

Zip file does not show up as option. If I look at files it shows it as an .img file on phone????

Sounds like you either downloaded the wrong file, or extracted the .img that is in the .zip

Double check which version you have. If it's the .img then just use fastboot to flash it. If that's not something you're comfortable with, then just re-download the correct .zip but do not extract it. Put the .zip on your card as-is. Should work fine after that.

 

[sms2000]

Just immerced myself

I'm two hours a proud owner of Atrix.
My first question of a complete new guy is:
Is it Atrix 4G or Atrix or what?

The model number is MB860.

I'm in doubts this is the 4G model. It's definitely not an Atrix 2. And I didn't find a thread about pure Atrix, only Atrix 4G and Atrix 2. Where should I go?

Thanks.

 

[Swiftks]

I'm two hours a proud owner of Atrix.
My first question of a complete new guy is:
Is it Atrix 4G or Atrix or what?

The model number is MB860.

I'm in doubts this is the 4G model. It's definitely not an Atrix 2. And I didn't find a thread about pure Atrix, only Atrix 4G and Atrix 2. Where should I go?

Thanks.

Atrix 4G = Atrix = Motorola Olympus = MB860

Sent from my MB860 using xda premium

 

[sms2000]

Thanks. I'm in.

 

[bogomil92]

Hello, my brand new unlocked Atrix says my Vectone sim card is locked but works properly with Orange and Vodafone ones. The Vectone card also seems to work properly with my old phone. Can somebody tell me how could this be?
Regards