How To Guide (Updated 5/21/23) How to enable N77 C-Band with 5G UW icon on OnePlus 9/9 Pro 5G (LE2115/LE2125) | Oxygen OS 11-13.1 with Custom ROM support | Verizon

Search This thread
Have you tried Nameless ROM? Though I don't think it has N77 or N260/N261 enabled, I only tested it for a limited time. Apparently StagOS has N77 enabled, but again, I could not test it as I had major issues with that ROM.
No I have not, I saw it but it says F.20 is included, but I'd like to use F.21. Maybe if I flash it with lineage recovery it'll keep F.21? No idea.

Weird that n77 is disabled but n260 and n261 aren't. Most of the time on 5G nationwide, NSG shows LTE with either 2 or 3 CA. On rare occurrences it shows NR-NSA. Either way, it's always on n2, n5, or n66.
 

rmendez011

Senior Member
No I have not, I saw it but it says F.20 is included, but I'd like to use F.21. Maybe if I flash it with lineage recovery it'll keep F.21? No idea.
I don't recommend you go to OOS 13 F.21, for some reason I cannot root it, I keep going into crash dump mode.
Weird that n77 is disabled but n260 and n261 aren't. Most of the time on 5G nationwide, NSG shows LTE with either 2 or 3 CA. On rare occurrences it shows NR-NSA. Either way, it's always on n2, n5, or n66.
N77 has been disabled since launch because at the time, the FCC hadn't done the C-Band auctions, while N260 and N261 had been active for a while.
 
I don't recommend you go to OOS 13 F.21, for some reason I cannot root it, I keep going into crash dump mode.
I was able to root it just fine a couple days ago. I know I flashed the apk renamed to zip but I don't remember how. I think it was in recovery.

EDIT: I might have flashed lineage recovery then flashed magisk from there. I can check in my shell history tomorrow.
 
Last edited:

rmendez011

Senior Member
I was able to root it just fine a couple days ago. I know I flashed the apk renamed to zip but I don't remember how. I think it was in recovery.

EDIT: I might have flashed lineage recovery then flashed magisk from there. I can check in my shell history tomorrow.
I fixed it, don't worry, and I can confirm F.21 still has N77 disabled, but my guide works without issue and you still get a 5G UW icon.
Screenshot_2023-04-03-21-06-20-17_fc704e6b13c4fb26bf5e411f75da84f2.jpg
Screenshot_2023-04-03-21-06-33-97_ffbad1d3365dc318e70a4282340f21a4 (1).jpg
 
In 3-5 business days I should be getting a Mint sim to test if I can connect to mid band or high band. I'm sure it has better coverage than Verizon anyway, but I think I'm going to end up switching to T-Mobile. My dad can get a military discount so Magenta Max would be $120 for 3 lines. Much cheaper than Verizon.
 
I just MSM'd back to OOS, updated to F.21, and did the hack. I am going to flash Nameless now and hope it persists.

I wonder if SA will work once Verizon rolls it out to consumers, it has the bands and the hack should have unlocked them.

EDIT: Nameless is great, very snappy, has some extra features not in AOSP or lineage afaik. Will test soon to see if my EFS change is still there.

EDIT 2: Can't use NSG advanced mode on Nameless. Any way to fix it?
Screenshot_20230404-190648_Network_Signal_Guru.png


EDIT 3: Was able to get QPST to somehow work on Nameless, but only once. I figured that it worked on this ROM, so I did an ota update. But then it never showed up again. I guess tomorrow I'll MSM again. I also learned that the EFS changes do not survive an OTA, nor flashing a custom ROM. I wonder if you could back up EFS then restore after flashing.
 
Last edited:
I've given up getting it to work on a custom ROM. I dumped my modem file after using QPST to apply the hack. Opening it in a hex editor still shows generic-band-restrictions.
1680730553964.png

I'm not sure what to do. I might have to cope with OOS for now. Maybe I can replace the 77's with spaces..? I can't figure out how to flash it though.

EDIT: Replaced the 77's with spaces, and flashed it. Can't test if it works right now, but maybe tomorrow. I still can't figure out how to fix NSG on Nameless.
 
Last edited:

rmendez011

Senior Member
Yeah I have a newer SIM so I should be able to get the UW icon. It shows stuff about it in CellMapper.

By the way, does that Mint free trial have UC? I didn't think it does.
Sorry for the delay, I did not get a notification for any of your replies! Yes the Mint free trial have 5G UC, but the OnePlus 9 Pro does not have a 5G UC icon.
In 3-5 business days I should be getting a Mint sim to test if I can connect to mid band or high band. I'm sure it has better coverage than Verizon anyway, but I think I'm going to end up switching to T-Mobile. My dad can get a military discount so Magenta Max would be $120 for 3 lines. Much cheaper than Verizon.
I've been wanting to switch to T-Mobile as well, what's holding me back is the no 5G UC icon, and limited mmWave, I can go down the street and find 3,500Mbps mmWave, don't think I'd find that with T-Mobile haha.
I just MSM'd back to OOS, updated to F.21, and did the hack. I am going to flash Nameless now and hope it persists.

I wonder if SA will work once Verizon rolls it out to consumers, it has the bands and the hack should have unlocked them.
SA should work, as there is a toggle in developer options for either Auto, NSA only, or SA + NSA.
EDIT: Nameless is great, very snappy, has some extra features not in AOSP or lineage afaik. Will test soon to see if my EFS change is still there.

EDIT 2: Can't use NSG advanced mode on Nameless. Any way to fix it?
View attachment 5880869
NSG did not work for me on Nameless when I tried.
EDIT 3: Was able to get QPST to somehow work on Nameless, but only once. I figured that it worked on this ROM, so I did an ota update. But then it never showed up again. I guess tomorrow I'll MSM again. I also learned that the EFS changes do not survive an OTA, nor flashing a custom ROM. I wonder if you could back up EFS then restore after flashing.
I've given up getting it to work on a custom ROM. I dumped my modem file after using QPST to apply the hack. Opening it in a hex editor still shows generic-band-restrictions.
View attachment 5881581
I'm not sure what to do. I might have to cope with OOS for now. Maybe I can replace the 77's with spaces..? I can't figure out how to flash it though.

EDIT: Replaced the 77's with spaces, and flashed it. Can't test if it works right now, but maybe tomorrow. I still can't figure out how to fix NSG on Nameless.
Woo!!!
Got my Mint sim. Interesting that the T-Mobile 5G low band always uses NR-NSA, unlike Verizon, which uses LTE 2 or 3x CA most of the time. Haven't been able to check if my Verizon UWB fix for custom ROMs works yet.

I also went back to Lineage for working Network Signal Guru.
Maybe T-Mobile has more 5G in your area? When I used to live in LA I always had NR-NSA, now that I'm in Bakersfield, I get more 4G than 5G.
N77 on a custom ROM!!!! I can write a quick tutorial if anyone wants. It's more for advanced users since it requires manually editing modem.img.
View attachment 5884573
Yes please! Will definitely be useful if OnePlus never officially enables it once the last update for the 9 Series drops, you are amazing!!

Also please let us know how you got QPST to work once on Nameless!
 
I've been wanting to switch to T-Mobile as well, what's holding me back is the no 5G UC icon, and limited mmWave, I can go down the street and find 3,500Mbps mmWave, don't think I'd find that with T-Mobile haha.
I can't find any mmWave near me... and it looks like all the N77 towers by me are capped at 300mbps. Max I've gotten on N77 was 299mbps.

Yes please! Will definitely be useful if OnePlus never officially enables it once the last update for the 9 Series drops, you are amazing!!
I wrote a Python script to do the patching. There's a quick guide in the readme. Feel free to tell me if I should adjust anything.

Also please let us know how you got QPST to work once on Nameless!
Same way on OOS. Don't know how it worked, but it was only once. After reflashing, it still didn't work. I've switched to Lineage since Nameless isn't open source either. Unfortunately it seems only OOS has the UW icon, but maybe there's another ROM that has added it in.
 

rmendez011

Senior Member
I can't find any mmWave near me... and it looks like all the N77 towers by me are capped at 300mbps. Max I've gotten on N77 was 299mbps.
There is a surprising amount of mmWave in Bakersfield, it's all around me. N77 in my area doesn't seem to be capped, highest I've seen was ~500Mbps down, but ping time is horrible, as there doesn't seem to be any Speed test servers in Bakersfield.
I wrote a Python script to do the patching. There's a quick guide in the readme. Feel free to tell me if I should adjust anything.
Nice! I will update my guide to include your guide, I will definetly use this whenever I decide to run a custom ROM.
Same way on OOS. Don't know how it worked, but it was only once. After reflashing, it still didn't work. I've switched to Lineage since Nameless isn't open source either. Unfortunately it seems only OOS has the UW icon, but maybe there's another ROM that has added it in.
I suspect the reason custom ROMs don't have the 5G UW icon is due to the fact that they are based off OOS 12, while the icon was added recently to OOS 13.
 

rmendez011

Senior Member
Can anyone with a factory reset LE2115/LE2125 OnePlus 9/9 Pro running the latest Oxygen OS 13.1.0.582(EX01) confirm whether or not this update officially enabled N77?

I updated my LE2125 OnePlus 9 Pro to OOS 13.1.0.582(EX01) and 5G UW N77 worked without doing my mod, not sure if OnePlus didn't touch that partition and it carried over, or they officially enabled it without mention in the update log.
 
Can anyone with a factory reset LE2115/LE2125 OnePlus 9/9 Pro running the latest Oxygen OS 13.1.0.582(EX01) confirm whether or not this update officially enabled N77?

I updated my LE2125 OnePlus 9 Pro to OOS 13.1.0.582(EX01) and 5G UW N77 worked without doing my mod, not sure if OnePlus didn't touch that partition and it carried over, or they officially enabled it without mention in the update log.
You could probably check the generic_band_restrictions.xml file to see if 77 is in there.
 

Top Liked Posts

  • There are no posts matching your filters.
  • 6

    How to enable N77/N78 5G on the LE2115/LE2125 OnePlus 9/9 Pro running Oxygen OS 11-13.1​

    Before we start, keep in mind the following:
    Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about this modification before applying it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

    Keep in mind:
    This can dramatically affect your battery life whenever on 5G data, as this an unofficial mod, the phone will be constantly connected to 5G UW (without the 5G UW logo of course) in N77 areas, I have no idea how to solve this (other than turning off 5G until you want SPEEEEEED). Smart 5G does not seem to have an effect on this.

    Update 5/8/23:
    Thanks to @itsnebulalol, they have been able to enable N77 on custom ROMs on OnePlus 9 and 9 Pro, for anyone with a OnePlus 9/9 Pro running a custom ROM, you can follow their guide here, on Github.

    Update 2/21/23:
    On Oxygen OS 13 F.20/F.21 (maybe older) if you get a new SIM card from Verizon (cannot confirm about other carriers) post N77 launch, you will get a 5G UW icon in your status bar, thanks to @caseyr7 for pointing this out. (Sorry about the slow SpeedTest).
    screenshot_2023-02-21-14-30-25-12_79d0ff8f9752a3fc32487e6d62330a6a-jpg.5843571

    You will need these two items:

    QPST, download it from here.
    ADB (Obviously).


    Since OnePlus officially enabled N78 in Oxygen OS 12, this is how we will be able to enable and connect to N77 on Oxygen OS 13. I myself cannot personally test if this works on Oxygen OS 12, I can only assume it does.

    Great news! I have successfully enabled N77 on OnePlus 9 & 9 Pro running Oxygen OS 13 on the Verizon network! This would not have been possible without the help of @Rootk1t for showing me how to get Rndis,diag switch working, @sakun-ice, @jimmy123322, and @21prods for providing the necessary drivers needed.

    Disclaimer:
    Unfortunately, root is needed, so if you do not have root, do not continue reading.


    If you do have root, without further ado, let's begin.

    • Download the files provided below:
    • Once downloaded, open the ZIP file, head to Qualcomm Drivers, copy the "Mi5_Qualcomm_Drivers" to your desktop.

    • Once on your desktop, plug in your phone to your PC, make sure USB debugging is enabled.

    • Open a Terminal window and type the following code one line at a time:
    adb shell
    su
    setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb

    Note:
    If you have never done "adb shell" "su" before, you will get a Superuser request on your phone, press "Grant".
    Screenshot_2022-07-19-01-14-48-73_785cfb1f0fb0c9a2030c9b38a1c3479a.jpg
    Once you have pressed Grant then do:​
    setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb

    Note2:
    If you get "error: device '(null)' not found" or you do not see your device when doing "adb devices" under "List of devices attached" in Terminal
    NVIDIA_Share_b58JrnICYe.jpg
    NVIDIA_Share_7sD2cTxK6c.jpg
    You have to switch from "File Transfer / Android Auto" to "Photo Transfer" under the popup when you plug in your phone to your PC .
    Switch Use USB For to Photo Transfer.jpg
    This is what I have to do on my personal PC, but not on other PCs for some reason, it might be the same for you.
    • After doing the previous command you will hear a USB disconnect and reconnect sound, do not panic, this is intended.

    • Open device manager.
    1658219286386.png
    Under "Other devices" you will see quite a few devices with no driver, we're only going to focus on 3 of them.​
    • Double click on the first "SM8350-MTP _SN:E1B16ED0" device you see, once the properties window appears, press "Update driver...".
    1658219359722.png
    • When the "How do you want to search for drivers?" window appears, press "Browse my computer for drivers".
    1658219489438.png
    • When the "Browse for drivers on your computer" tab appears, press "Let me pick from a list of available drivers on your computer".
    1658219558722.png
    • When the "Select your device's type from the list below:" tab appears, press the top most "Show all devices" option and press next.
    1658219674517.png
    • When the "Select the device driver you want to install for this hardware" press "Have Disk...".
    1658219765684.png
    • When the "install from disk" window appears, press browse.
    1658219834943.png
    • When the locate file window appears, navigate to the "Mi5_Qualcomm_Drivers" folder you extracted to your desktop earlier and open the "qcmdm.inf" file.
    1658219924679.png
    • When you return to the previous "Install from disk" window press Ok. Once that window closes, you should be at the previous "Select the device driver you want to install for this hardware" window, on the left side, make sure to select "Qualcomm Incorporated", on the right, scroll down until you find "Qualcomm HS-USB Android DIAG 9018" click it, and press next.
    1658220200551.png
    • You might get a "Update driver warning" stating that updating this driver is not recommended because Windows cannot verify compatibility, press yes.

    • Once Windows successfully updates your driver, press close, keep in mind windows might restart after you do so. You will have to do the command again.
    "setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb".​
    • Now do the same to the other 2 "SM8350-MTP _SN:E1B16ED0", for me, QPST only worked with the second one, it could different for you.

    • Once you have done the steps above, open QPST config.
    NVIDIA_Share_3wYhw27bjU.jpg
    • Once QPST is open, at the top press "Start Clients" > and press "EFS Explorer", once you press EFS Explorer, a "Phone selection" window will appear, be sure to select the one that is called "LAHAINA" and has your ESN on it, AKA do not select one that says "Unknown" and "No ESN", press OK.
    NVIDIA_Share_OECOkT21k2.jpg
    • Once you press ok, it will take 20-30 seconds for the EFS Explorer window to appear, once it appears, on the left side press "policyman", and on the right drag and drop "policies.xml" to the desktop.
    1675835868694.png
    • Open "policies.xml", and remove the following 3 lines.
    1675835976652.jpeg
    1675836018595.jpeg
    • Once you have removed the 3 lines, and ONLY those 3 lines, once you have saved and closed the file, just drag it back into EFS Explorer, once that is completed, do a reboot.

    • Wala! Your OnePlus 9 or 9 Pro should be able to connect to N77 as seen below.
    OOS 13 N77 5G Speedtest.jpg
    Network Signal Guru OOS 13 N77.png
    By doing this mod, it completely ignores the "generic_band_restrictions.xml" file, @ale_jenior this might even allow it to connect to LTE band 28. I however cannot test this.

    Hopefully this tutorial helps all of those on Verizon and have a 5G UW plan.

    Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about this modification before applying it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

    Make sure you're on Oxygen OS 11 (11.2.10.10 preferably, as this is what I tested this on):

    • Download this APK and install it.
      • Alternatively, go to this website, follow the guide, and carry on.

    • Once both the apk (unless you went the alternative route) and QPST are installed, open your phone dialer and dial *#801#.

    • Press Engineering Mode, if it asks you, press "just once".
      • Ignore if you went the alternative route, it should open engineering mode once you dial *#801# right away.

    • Once engineering mode is open, turn on the last switch called "Rndis,diag switch" keep it on that screen and plug your phone into your PC, then open the QPSTConfig program on your computer.
    • Only 1 device should show up, make sure it's selected.
      QPSTConfig_kIvg9mNXd6.jpg


    • Press "Start Clients" in the menu bar and "EFS Explorer" in the sub menu.
    QPSTConfig_TFwK2DUhdp.jpg

    • Again, only 1 device should show up, make sure it's selected, and press ok.
      EFSExplorer_PtLfwFTrOD.jpg
    • On the left side click "policyman", on the right side find "generic_band_restrictions.xml" drag and drop it onto your desktop.
    EFSExplorer_3AiZOXsDuF.jpg
    • Open it (duh lol)
    • Look for the 2 lines shown in red boxes below.
    EFSExplorer_f3EYw7Y5dr.jpg

    • Change it exactly to how it is shown below (extra space after each 47)
    EFSExplorer_UlfrUNNZZw.jpg
    • Once you've edited and saved the file, drag and drop it back into your "policyman" folder (make sure to not change the file name or extension, always make a backup of your original file!), congrats! It should be enabled, make sure to reboot to make sure the effects apply.

    Here is a speed test I ran on my 9 Pro, and next to it, is Network Signal Guru showing it connected to N77.​
    yahSU6e.jpg
    PP2CS3r.jpg

    Something important to keep in note is that I have not tested this on Oxygen OS 12, if someone has enough courage to try on OOS 12 and finds a way to enable engineering mode, feel free to let others know in a reply.

    I have only tested this on the North American LE2125 OnePlus 9 Pro 5G on Verizon, it should work on the North American LE2115 OnePlus 9 5G on Verizon, and maybe work on the T-Mobile LE2117/LE2127 OnePlus 9/9 Pro. Unsure if international variants have N77 and N78 disabled (I doubt they would work on Verizon anyways), only try if you're willing to risk it! Let me know in a reply if it works.

    Now I don't know if you need Qualcomm Drivers, but if your phone doesn't appear in QPST, download them from here.

    If you have any more questions, feel free to ask me!

    I cannot confirm whether or not this works on any other OnePlus 9/ 9 Pro model, do this mod at your own risk.​

    5
    Notice:
    I did this on a U.S. OnePlus 9 Pro LE2125 running Oxygen OS 12.1 (LE2125_11_C.61)

    I have not tested to see if N77 actually works after performing this mod, also, please keep in mind:

    Your warranty is now void. I am not responsible for bricked devices, dead SD cards, thermonuclear war, or you getting fired because the alarm app failed. Please do some research if you have any concerns about this modification before applying it! YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

    I will test to see if I get an N77 signal sometime today.

    KEEP IN MIND THIS DOES NOT SURVIVE A REBOOT, OnePlus changed something going from OOS 11 to OOS 12, you will have to use QPST EFS Explorer every time you reboot to enable N77, I have no idea why.

    It seems OnePlus has officially enabled N78 on the 9/9Pro, no idea why they didn't go ahead and enable N77 but oh well 🤷🏻‍♂️ (maybe Verizon is unlocking N78 soon, no idea).


    Good news! I have figured out a way to get QPST working on Oxygen OS 12! This means I could also enable N77 on the 9 and 9 Pro running on the Verizon network! This would not have been possible without the help of @Rootk1t for showing me how to get Rndis,diag switch working, @sakun-ice, @jimmy123322, and @21prods for providing the necessary drivers needed.

    Disclaimer:
    Unfortunately, root is needed, so if you do not have root, do not continue reading.


    If you do have root, without further ado, let's begin.

    • Download the files provided below:
    • Once downloaded, open the ZIP file, head to Qualcomm Drivers, copy the "Mi5_Qualcomm_Drivers" to your desktop.

    • Once on your desktop, plug in your phone to your PC, make sure USB debugging is enabled.

    • Open a Terminal window and type the following code one line at a time:
    adb shell
    su
    setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb

    Note:
    If you have never done "adb shell" "su" before, you will get a Superuser request on your phone, press "Grant".
    Screenshot_2022-07-19-01-14-48-73_785cfb1f0fb0c9a2030c9b38a1c3479a.jpg


    • Once you have pressed Grant then do:
    setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb

    • After doing the previous command you will hear a USB disconnect and reconnect sound, do not panic, this is intended.

    • Open device manager.
    1658219286386.png
    Under "Other devices" you will see quite a few devices with no driver, we're only going to focus on 1 of them.​
    • Double click on the first "SM8350-MTP _SN:E1B16ED0" device you see, once the properties window appears, press "Update driver...".
    1658219359722.png
    • When the "How do you want to search for drivers?" window appears, press "Browse my computer for drivers".
    1658219489438.png
    • When the "Browse for drivers on your computer" tab appears, press "Let me pick from a list of available drivers on your computer".
    1658219558722.png
    • When the "Select your device's type from the list below:" tab appears, press the top most "Show all devices" option and press next.
    1658219674517.png
    • When the "Select the device driver you want to install for this hardware" press "Have Disk...".
    1658219765684.png
    • When the "install from disk" window appears, press browse.
    1658219834943.png
    • When the locate file window appears, navigate to the "Mi5_Qualcomm_Drivers" folder you extracted to your desktop earlier and open the "qcmdm.inf" file.
    1658219924679.png
    • When you return to the previous "Install from disk" window press Ok. Once that window closes, you should be at the previous "Select the device driver you want to install for this hardware" window, on the left side, make sure to select "Qualcomm Incorporated", on the right, scroll down until you find "Qualcomm HS-USB Android DIAG 9018" click it, and press next.
    1658220200551.png
    • You might get a "Update driver warning" stating that updating this driver is not recommended because Windows cannot verify compatibilty, press yes.
    1658220294212.png
    • Once Windows successfully updated your driver, press close, keep in mind windows might restart after you do so. You will have to the
    "setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb" command again.​

    • Once you have done the steps above, enabling N77 is somewhat similar to before, but I will repeat the steps again, start with opening QPST.
    1658220671508.png
    • Once QPST is open, at the top press "Start Clients" > and press "EFS Explorer"
    1658220750658.png
    • Once you press EFS Explorer, a Phone selection window will appear, select your phone and press OK.
    EFSExplorer_frvNzoDGcn.jpg
    • Once you press ok, it will take 20-30 seconds for the EFS Explorer window to appear, once it appears, on the left side press "policyman", and on the right drag and drop "generic_band_restrictions.xml" to the desktop.
    1658221153518.png
    1658221184711.png
    • Open "generic_band_restrictions.xml" and edit the follow line to remove "77".
    wordpad_GDKeTUfx67.jpg
    wordpad_2_GDKeTUfx67.jpg
    • Once you removed "77" as shown above, save the xml, then just drag and drop the "generic_band_restrictions.xml" file into EFS Explorer and N77 should be enabled!
    2
    2
    Very interesting to say the least I would assume you are just connected to 77 I don't know why it would say 78? I do not think n78 is enabled anywhere for Verizon yet.


    But are you on Android 13 and you're rooted I take it?, Is it the same instructions to enable n77 as it was before with Android 11?

    Did you install anything or you just tried the code and you were able to get into those menus after being rooted?
    I actually "included" N78 in the "carrier_policy.xml" file as it was missing before, and it survives restarts, what doesn't survive restarts is the "generic_band_restrictions.xml" file, I remove the N77 exclusion from that but every restart/every ~12ish hours N77 reappears in the exclude section.

    I am on OOS 13 (you can tell by the status bar icons), yes, I am rooted, this is not possible without root, and no this will take a new guide on how to enable it, it still requires QPST and most of the instructions, but it includes modifying new xml files in QPST.

    I installed the Magisk Module you provided, and then the dialer code worked. Weird stuff haha.

    However, how do you enable VoWIFI with the dialer command? I cannot find it.
    1
    Wonder if it would work for AT&T. I'm guessing the bands are already available though, just not provisioned on AT&T's end.