• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

[UPDATED] [ROM] [11.0] [GAPPS] Project Sakura 5.1 for XPERIA 1 II [UNOFFICIAL]

Search This thread

ShionKagurazaka

Senior Member

3n4NiPo.jpg

About US:
Project Sakura is a custom ROM built around Lineage OS 18.1, It tries to remain true to it while also providing some more functionality and UI changes.
DISCLAIMER

Code:
* Your warranty is now void.
* We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
* You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
Important Information
1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
2. This ROM will never work with any versions of Google Camera (GCam)!
3. You need to flash Stock Android 11 before flashing this ROM.
4. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
5. If you came from SODP ROMs, you need to go back to official Android 10 firmware, and boot into launcher.
6. YOU MUST USE R VENDOR ( Which is Stock Android 11 ) in order to boot into system.If you use Q VENDOR, I WILL LAUGH AT YOU!
7.For Chinese Users: I noticed that MEGA/AFH is slow in PRC now. So I already upload it to Baidu Netdisk. If you need it, Tell me :)
BUT DON'T UPLOAD IN COOLAPK, THANK YOU.
8. No matter what, Nobody can sell my works to earn dirty money.

Downloads Links: 5.R:
AFH
Downloads Links: 5.1: AFH (NEW)

Looking For CinemaPro And PhotoPro?:

See This Thread ~

Flashing and updating:
How to flash
Make sure you upgraded to Official Android 11.0 from Sony
Unlock bootloader is necessary.
Download latest platform-tools from
google

1. Install fastbootd drivers, guidance
2. Put your device into fastboot by volume up key.
3. Enter fastbootd:
Code:
fastboot reboot fastboot
4. Flash Project Sakura:
Code:
fastboot set_active a
fastboot flash boot_a boot.img
fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
fastboot erase metadata
fastboot flash system_a system.img
fastboot flash product_a product.img
5. If you are first time to flash Project Sakura, Wipe the old userdata:
Code:
fastboot erase userdata


Root access:
Flash Magisk in recovery.
Report issues only if you are using the ROM kernel
If an additional mod is installed, make sure it's unrelated, and mention it
Make sure the issue wasn't discussed earlier in the threads
Share a log of the error with Logcat for example.

Also thanks to:
Sjllls
Egg Oxygen
HelloBBN
Cramfs28
ReallySnow
The Project Sakura Team


Builder: Shion Kagurazaka.

Source:

Just Use Sjllls Lineage 18.1 Device Tree and Vendor

Feel free to donate me:
Paypal(iF YOU REALLY WANNA DONATE ME VIA PayPal, PM in Telegram xD)
Alipay
ROM OS Version: Android 11
ROM Kernel: Linux 4.x

Version Information
Status:
Stable

Created 2021-04-04
Last Updated 2021-07-10
 
Last edited:

ShionKagurazaka

Senior Member
Perfect rom(y)(y)(y),but I can‘t flash gapps in recovery:(,Prompt: Installation Failed! Looks like Storage space is full!
Yep, XPERIA 1 II is a dynamic partation device. and I don't leave space to install GApps.
If you need it, I think you can use the WeebGApps Magisk version.(The GApps can be installed via Magisk ).
Here are the link :https://t.me/WeebGAppsChannel/583
 

KitsunePrincess

New member
Jun 19, 2021
2
2
Hello! New to the custom ROM scene, so please forgive my ignorance. When you say to patch Magisk in recovery, do you mean using this method (patching the recovery.img), or patching it using TWRP right after flashing Project Sakura?

I tried installing Magisk by patching boot.img using the method linked above and was getting constant "Google Play services keeps stopping" errors as well as "Can't download <app name>" errors for some apps, so I figured should try the method the post says to use before asking for help with that, and wanted to make sure before flashing to my recovery.
 
  • Like
Reactions: ShionKagurazaka

ShionKagurazaka

Senior Member
Hello! New to the custom ROM scene, so please forgive my ignorance. When you say to patch Magisk in recovery, do you mean using this method (patching the recovery.img), or patching it using TWRP right after flashing Project Sakura?

I tried installing Magisk by patching boot.img using the method linked above and was getting constant "Google Play services keeps stopping" errors as well as "Can't download <app name>" errors for some apps, so I figured should try the method the post says to use before asking for help with that, and wanted to make sure before flashing to my recovery.
For magisk: Just flash via recovery (23.0 use apk, you just need to change magisk 23.0 apk to magisk 23.0.zip)
I suggest you use OrangeFox (Although I no longer support it)
And GAPPs Stopping is caused by WeebGapps issue.
It is my wrong I think: resize the system too small...:)
I will update it in July(My summer vacation)
Thanks for your appreciation.
 

KitsunePrincess

New member
Jun 19, 2021
2
2
For magisk: Just flash via recovery (23.0 use apk, you just need to change magisk 23.0 apk to magisk 23.0.zip)
I suggest you use OrangeFox (Although I no longer support it)
And GAPPs Stopping is caused by WeebGapps issue.
It is my wrong I think: resize the system too small...:)
I will update it in July(My summer vacation)
Thanks for your appreciation.
Ahh, gotcha. Well, I appreciate the advice and look forward to whenever you're able to update it. Thanks for the work you do porting custom ROMs!
 
  • Like
Reactions: ShionKagurazaka

Top Liked Posts

  • There are no posts matching your filters.
  • 2

    3n4NiPo.jpg

    About US:
    Project Sakura is a custom ROM built around Lineage OS 18.1, It tries to remain true to it while also providing some more functionality and UI changes.
    DISCLAIMER

    Code:
    * Your warranty is now void.
    * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels.
    * You do it at your own risk and take the responsibility upon yourself and you are not to blame us or XDA and its respected developers.
    Important Information
    1. This ROM has nothing related to ODM images! So you don't need to ask/install anything like that, just follow the instructions.
    2. This ROM will never work with any versions of Google Camera (GCam)!
    3. You need to flash Stock Android 11 before flashing this ROM.
    4. For VoLTE, you need to boot into stock firmware and enable it before flashing this ROM!
    5. If you came from SODP ROMs, you need to go back to official Android 10 firmware, and boot into launcher.
    6. YOU MUST USE R VENDOR ( Which is Stock Android 11 ) in order to boot into system.If you use Q VENDOR, I WILL LAUGH AT YOU!
    7.For Chinese Users: I noticed that MEGA/AFH is slow in PRC now. So I already upload it to Baidu Netdisk. If you need it, Tell me :)
    BUT DON'T UPLOAD IN COOLAPK, THANK YOU.
    8. No matter what, Nobody can sell my works to earn dirty money.

    Downloads Links: 5.R:
    AFH
    Downloads Links: 5.1: AFH (NEW)

    Looking For CinemaPro And PhotoPro?:

    See This Thread ~

    Flashing and updating:
    How to flash
    Make sure you upgraded to Official Android 11.0 from Sony
    Unlock bootloader is necessary.
    Download latest platform-tools from
    google

    1. Install fastbootd drivers, guidance
    2. Put your device into fastboot by volume up key.
    3. Enter fastbootd:
    Code:
    fastboot reboot fastboot
    4. Flash Project Sakura:
    Code:
    fastboot set_active a
    fastboot flash boot_a boot.img
    fastboot --disable-verity --disable-verification flash vbmeta_a vbmeta.img
    fastboot --disable-verity --disable-verification flash vbmeta_system_a vbmeta_system.img
    fastboot erase metadata
    fastboot flash system_a system.img
    fastboot flash product_a product.img
    5. If you are first time to flash Project Sakura, Wipe the old userdata:
    Code:
    fastboot erase userdata


    Root access:
    Flash Magisk in recovery.
    Report issues only if you are using the ROM kernel
    If an additional mod is installed, make sure it's unrelated, and mention it
    Make sure the issue wasn't discussed earlier in the threads
    Share a log of the error with Logcat for example.

    Also thanks to:
    Sjllls
    Egg Oxygen
    HelloBBN
    Cramfs28
    ReallySnow
    The Project Sakura Team


    Builder: Shion Kagurazaka.

    Source:

    Just Use Sjllls Lineage 18.1 Device Tree and Vendor

    Feel free to donate me:
    Paypal(iF YOU REALLY WANNA DONATE ME VIA PayPal, PM in Telegram xD)
    Alipay
    ROM OS Version: Android 11
    ROM Kernel: Linux 4.x

    Version Information
    Status:
    Stable

    Created 2021-04-04
    Last Updated 2021-07-10
    1
    Very cool to see more R-vendor roms. Thanks for sharing!
    1
    I have said no longer support pdx206
    Oh okay... i didn't even know it .. so there are no more developers for the pdx206 ... super cool ..
    1
    Perfect rom(y)(y)(y),but I can‘t flash gapps in recovery:(,Prompt: Installation Failed! Looks like Storage space is full!
    1
    Try to use the Sony Stock Camera I ported
    ok thank u,the rom does not support the exFAT format of external card. It can only be formatted as FAT32. Can it be repaired?by the way,The stock ROM supports exFAT