[UPG][12.04.07]Free HTC Touch Unlocking. Simple. As promised[ONLINE]

Search This thread
Hi Friends,

Sincere apologies for not being able to reply your posts & PM's as I have been keeping very busy for the past 3 months.

Since I was on my 1-week vacation, I thought of working on your problems, and have come up with the updated version of this tool. Hope it resolves all your issues.

You would not get any annoying pop-up with this tool now, only the one that has your unlock code... :)

Steps :
1. Copy 'Cert_SPCS.cab' on your phone & install(run).
2. Copy 'EnableRapi.cab' on your phone & install(run).
3. Establish an Activesync connection with your phone.
4. Unzip the zip file & Run 'Unlock_Touch.exe' on your PC. ( New Unlocker)
5. File 'unlock_code.txt' thus generated will have your unlock code( Eight-digit number).Ignore any other digits if generated.

I HAVE BROKEN THE LCD OF MY HTC TOUCH SO HAVE COME DOWN TO MY NOKIA 6600. INCONVENEINCE, IF ANY; IS REGRETTED.

Cheers,
rishi2504.

You could sponsor me a beer( LCD Screen for my broken Touch) by donating to my Paypal ID - [email protected], if you like this solution... :)
 

Attachments

  • Cert_SPCS.cab
    70.5 KB · Views: 81,941
  • EnableRapi.cab
    69.7 KB · Views: 65,312
  • Touch_Unlock.zip
    224.6 KB · Views: 93,704
Last edited:

pof

Retired Moderator
Mar 18, 2005
3,571
72
40
Barcelona
pof.eslack.org
Congrats rishi2504!

Just a few comments about your unlocker:

1) Unlocker needs itsutils.dll and pdocread.exe in folder c:\unlocker otherwise it doesn't work
2) device needs to be RAPI unlocked first
3) unlocker reads 8 bytes starting at offset 0xfc of BK1C, this will work on most touch devices, but not on all, see example output:

Here it will work:
Code:
000000d0  33 37 32 33 30 30 34 30  34 00 00 00 33 35 35 31  |372300404...3551|
000000e0  31 31 31 31 31 31 31 31  31 31 31 00 00 00 00 00  |11111111111.....|
000000f0  00 00 00 00 00 00 00 00  00 00 00 00 37 32 31 32  |............7212|
00000100  36 31 33 32 00 00 00 00  00 00 00 00 32 34 00 00  |6132........24..|
00000110  00 00 00 00 00 00 00 00  00 00 00 00 30 30 31 30  |............0010|

Here it will not work, the unlock code is at a different offset:
Code:
000000d0  00 00 00 00 34 30 42 46  42 37 32 34 30 35 35 35  |....40BFB7240555|
000000e0  36 00 00 00 33 35 35 30  30 30 30 30 30 30 30 30  |6...355000000000|
000000f0  30 30 30 00 00 00 00 0f  00 00 00 00 00 00 00 00  |000.............|
00000100  00 00 00 00 34 30 35 34  31 37 31 34 00 00 00 00  |....40541714....|
00000110  00 00 00 00 32 34 00 00  00 00 00 00 00 00 00 00  |....24..........|

To fix this I suggest dumping 20 bytes starting at offset 0xf8 :)
 
Congrats rishi2504!

Just a few comments about your unlocker:

1) Unlocker needs itsutils.dll and pdocread.exe in folder c:\unlocker otherwise it doesn't work
It should'nt really happen coz I have attached these two with the utility...lemme check that...
2) device needs to be RAPI unlocked first
Correct...I forgot to mention about that....
3) unlocker reads 8 bytes starting at offset 0xfc of BK1C, this will work on most touch devices, but not on all, see example output:
Here it will work:
Code:
000000d0  33 37 32 33 30 30 34 30  34 00 00 00 33 35 35 31  |372300404...3551|
000000e0  31 31 31 31 31 31 31 31  31 31 31 00 00 00 00 00  |11111111111.....|
000000f0  00 00 00 00 00 00 00 00  00 00 00 00 37 32 31 32  |............7212|
00000100  36 31 33 32 00 00 00 00  00 00 00 00 32 34 00 00  |6132........24..|
00000110  00 00 00 00 00 00 00 00  00 00 00 00 30 30 31 30  |............0010|

Here it will not work, the unlock code is at a different offset:
Code:
000000d0  00 00 00 00 34 30 42 46  42 37 32 34 30 35 35 35  |....40BFB7240555|
000000e0  36 00 00 00 33 35 35 30  30 30 30 30 30 30 30 30  |6...355000000000|
000000f0  30 30 30 00 00 00 00 0f  00 00 00 00 00 00 00 00  |000.............|
00000100  00 00 00 00 34 30 35 34  31 37 31 34 00 00 00 00  |....40541714....|
00000110  00 00 00 00 32 34 00 00  00 00 00 00 00 00 00 00  |....24..........|

To fix this I suggest dumping 20 bytes starting at offset 0xf8 :)

Correct again...but I tested it on the Indian ones, and found no reason why it shud'nt work on other versions...thanks for the suggestion...appreciated....!! This forum thrives on experts like you !! :eek:)


Will update the instructions and post the updated unlocker..

cheers,
rishi2504

Update : Corrected version is posted now along with RAPI Unlocking files.
 
Last edited:

sixvoltz

New member
Sep 9, 2007
1
0
i followed the instructions but the notepad generated contains nothing...
just blank file....i have the itsutils.dll file needed and the pcdocread.exe..

whats do you think is wrong?.... i dont know what network it is locked to....

any suggestions???
 

superspotter

New member
Sep 7, 2007
1
0
i am getting an error message as follows

"Application created with unregistered version of Quick Batch File Compiler."

The note pad generated is blank.

please help

rgds

SS
 

rajismine

Senior Member
Sep 6, 2007
74
1
Hey Rishi. I guess I am in a fix now. The notepad file created named code contains nothing.

AL also tried the other method, the one given earlier but the unlock code did not chage. I mean it is the same as it was before me running the process.

Please dear help me out

Rajeev
 

aap500

Member
Sep 5, 2007
5
0
Geleen
Hey Rishi. I guess I am in a fix now. The notepad file created named code contains nothing.

AL also tried the other method, the one given earlier but the unlock code did not chage. I mean it is the same as it was before me running the process.

Please dear help me out

Rajeev

i had the same but after coppy itsutils.dll ( http://wiki.xda-developers.com/index...ename=XdaUtilsin ) to your windows dir on your mobile phone and pdocread.exe in the C:/unlocker folder (where you extracted Elf_Unlocker.zip ) on your pc it worked just fine

with the earlyer unlocker i had the same problem as you did. The imei en unlock code did not change.
Dont forget to run Cert_SPCS.cab (1ST) and then EnableRapi.cab (2end)

good luck
 

rajismine

Senior Member
Sep 6, 2007
74
1
Dont forget to run Cert_SPCS.cab (1ST) and then EnableRapi.cab (2end)

good luck[/QUOTE]

Hey How to run these files. I just copied them to "Mobile Device" folder in my computer and it extracted something. Is it what you mean by running???
 

Top Liked Posts

  • There are no posts matching your filters.
  • 3
    Hi Friends,

    Sincere apologies for not being able to reply your posts & PM's as I have been keeping very busy for the past 3 months.

    Since I was on my 1-week vacation, I thought of working on your problems, and have come up with the updated version of this tool. Hope it resolves all your issues.

    You would not get any annoying pop-up with this tool now, only the one that has your unlock code... :)

    Steps :
    1. Copy 'Cert_SPCS.cab' on your phone & install(run).
    2. Copy 'EnableRapi.cab' on your phone & install(run).
    3. Establish an Activesync connection with your phone.
    4. Unzip the zip file & Run 'Unlock_Touch.exe' on your PC. ( New Unlocker)
    5. File 'unlock_code.txt' thus generated will have your unlock code( Eight-digit number).Ignore any other digits if generated.

    I HAVE BROKEN THE LCD OF MY HTC TOUCH SO HAVE COME DOWN TO MY NOKIA 6600. INCONVENEINCE, IF ANY; IS REGRETTED.

    Cheers,
    rishi2504.

    You could sponsor me a beer( LCD Screen for my broken Touch) by donating to my Paypal ID - [email protected], if you like this solution... :)
    1
    A quick How-do-i-do-this-even-easier-then-it-is-explain guide:

    Download the file package which i included.
    The content is self explained.

    1. Establish activesync connection.
    2. Copy and Run the contents of the "Copy and Install these 2 CAB files on your Touch" folder on your Touch
    3. Copy the file inside the "Put the file thats inside this folder in your Windows Mobile folder" folder to your Windows folder on your Touch
    4. Copy the folder "Unlocker" to your pc. PREFERABLE your c:\ drive.
    5. Go to the location where you copied the "Unlocker" folder to. I.e "c:\unlocker" if that's where you placed it, if you put it on your desktop it ofcourse isn't in c:\unlocker.
    6. Run/Execute 'Elf_unlocker.exe'.
    7. You would get the unlock code in the notepad file....congrats !!
    8. Remove your simcard insert any other SIM and enter this unlock code...

    you just unlocked your Touch in 8 SIMPLE steps ;-)
    1
    I'm sorry for my bad english, but I wish to thanks so much Rishi2504.

    All has worked fine for me : just 2 or 3 minutes to unlock my HTC Touch (locked before on french operator Orange -a prepaid pack-).

    ...you restart the device with a different sim card...
    to be more precise, when you have the 8 digits restart your device with a sim from an other operator, never the same as yours. Example : to unlock a Orange locked phone, insert a SFR's sim.
    What I hope someone can answer for me is how do you find the SIM pin 4 digit code that you have to enter before entering the 8 digit unlock code. It seems like some people have had to do this, others just say unlocked in 5 min thanks haha. Is the 4 digit SIM pin included in the text file that the program generates?
    After the boot screen i've had this request for the 4 digits pin's code of an other sim card (SFR network), I've entered it 2 or 3 time but the HTC seen to be indifferent to this and suddenly the unlock window has emerged. So I entered the 8 digits to unlock my device and click on "Unlock". After this the HTC asked a new time the pin code (4 digits) : I've entered it a other time and... VOILA ;). All work fine, i've handed my original sim card in my device and it's good.

    Again excuse me for my bad english for this explanations, I just try to help others members. Have a good day.
    1
    So you knew the 4 digit pin code for SFR network? What about people who don't know the code. Does it say in the text file? I have no idea what the 4 digit code would be. I have Fido (CAN), New world (HKG), softbank (JPN) sim cards.
    The SFR sim card is an old of mine, so I've know is pin code. By default, a new sim card as this pin code : 0000 (4 zéro). Try this, or better, ask a friend who have a phone+sim from another network operator.
    1
    Unlock kpn!

    Hej Guy's,
    a lot of people couldn't unlock their HTC-Touch with the KPN provider.
    The solution is easy and FREE, but only If the phone is more then 1 year old.

    Just go to www.kpn.com
    Search for "unlock"

    Then fill in the form, ( e-mail, name, phone nr, IMEI-code, etc )

    In a few days/hours ( depends on KPN itself ) You will receive a e-mail message with the code.

    Put an other SIM in the phone, fill in the code you received, and the phone should be unlocked!!

    It worked for my KPN HTC-touch!

    If you can't find the form on the site, see

    ( http://zoek.kpn.com/9288000/zolzoek/portal?q=unlock ) and select Unlock code aanvragen
Our Apps
Get our official app!
The best way to access XDA on your phone
Nav Gestures
Add swipe gestures to any Android
One Handed Mode
Eases uses one hand with your phone