USB jig

[kitila]

I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.



Mod please move if in wrong section.

 

[annson08]

I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.



Mod please move if in wrong section.

This is great news. Will make a DIY one again soon.

Ps. Wrong section tho, ask mods to move to accesories or general.

Sent from my SM-G935F using Tapatalk

 

[peachpuff]

Heh i used to sell those back in the captivate days... good times

 

[KenHua]

You are in the right Section to me! It's part of recovery, not an accessory in generic sense!

 

[EarlZ]

It was also able to reboot the tamper counter before, will it do so with the s7 ?

 

[shaq1907]

It'a good that I haven't lost my old USB jig from S2 days

 

[kitila]

It was also able to reboot the tamper counter before, will it do so with the s7 ?

That I can not say for sure...until we have root I can't say

 

[kitila]

It'a good that I haven't lost my old USB jig from S2 days

I know right I happen to find mine and gave it a try and it work

 

[Bajanman]

Thread moved ok.

Thanks,
Bajanman

 

[kitila]

Thread moved ok.

Thanks,
Bajanman

Thank you..

 

[TehPirate_]

I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.

I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy

 

[annson08]

I wasn't around the mod scene back when the S2 was a thing. Could you share with me how you made a very clean jig? The ones I've found can be a bit messy

i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.

 

[kitila]

i think the one he has is a pre-made one, he bought it like that, I just made one using 3x100kOhms and 1x1kOhm. Didn't worked tho, maybe the usb cord I found collecting dust in the drawer is broken, will try with another cord.

This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.

 

[Sweep29]

I just want to confirm the the USB jig from back to the s2 will work with our s7 so when we get unlocked may help those who brick
Will post video if wanted to show.

Hi, can you upload the video please and if possible, show a link to buy or make the jig.

Thanks in advance

 

[ZaneCEO]

@kitila,
I found this topic Googling for this same info, so thanks for reporting that the USB Jig still works with S7!

 

[*Detection*]

This was a pre-made one but if I Remer correct it's a 100k resistor contacted to pin 3 and 5.

Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)

Or easier, buy one for a couple £ on ebay

 

[kitila]

Thank you for the correction on that I knew it was 100 something

 

[KJStar]

Can anyone confirm that this really works? My S7 seems to be hard bricked

 

[arich57]

Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)

Or easier, buy one for a couple £ on ebay

Can you point to where on ebay to get one? I can't seem to find the right search terms.

Thanks.

 

[shanky887614]

Still got one I made for the S4, it is 300k Ohm (Or the one I made, 3 x 100k Ohm) across pins 4 & 5 (ID & GROUND)

Or easier, buy one for a couple £ on ebay

good to know, I've got a 1,000 pack of 10k resistors in my desk lol

It's not what you buy its what you build