USB OTG & Nikon D7000..

[mymilkexpired]

So it seams that my OTG cable works fine for thumbdrives and the likes. But when I attach my D7000, no dice. The activity light on the camera comes on for a second or two like its trying to negotiate the USB connection and then turns off.

I check the /mnt/usbOTG OR /usbOTG folder and get nada. After reviewing some of the other threads I pulled down the USB OTG Watcher and same behavior. Thumb drivers are recognized no problem, but when the D7000 is attached its like nothing is working.

Ideas?

- Running Tiamat Moray 2.2.1

 

[hammer4203]

You don't have to use that for a dslr. It should be just going into the gallery and hook up the camera.

Sent from my ADR6400L using xda premium

 

[mymilkexpired]

That was the first thing I tried. Should have mentioned that. Opening the gallery does not show me anything from the camera.

 

[hammer4203]

Ok asked the wife. She says it should show imported pictures in the gallery when your camera is hooked up. It is a folder and then you can import them from there.

Sent from my ADR6400L using xda premium

 

[hammer4203]

Also it could be the root your using. I stuck to stock root on mine but never tested her dslr on it. I an going to test stock 3.2.2 when w get our xooms back from the upgrade. I am going they put in the ability to use my hdd and other stuff with the otg cable. If not rooting here I come.

Sent from my ADR6400L using xda premium

 

[BlimpyBoy]

my xoom only detects my d7000 when it has 2 memory cards inserted in it. Well, it opens the gallery app with only 1 card loaded but shows 0 pics regardless of whether there are jpegs on the card or not. I'm running rooted 3.2 with the tiamat kernel.

Put 2 cards in and it works great! Now if only I could figure out how to get the raw images off the camera without a card reader...

 

[Isun]

my xoom only detects my d7000 when it has 2 memory cards inserted in it. Well, it opens the gallery app with only 1 card loaded but shows 0 pics regardless of whether there are jpegs on the card or not. I'm running rooted 3.2 with the tiamat kernel.

Put 2 cards in and it works great! Now if only I could figure out how to get the raw images off the camera without a card reader...

I usually just set the camera to record a Raw file on one card and a .jpeg on the other so that I can transfer the .jpeg to the Xoom for preview on it's larger screen but leave the large Raw files on the camera's card since it will take up too much space on the Xoom and not be viewable. As another option, your second card in the camera could be the Eye-Fi card which has an Android app and will wirelessly transmit all files or just jpegs to the Xoom while you shoot.

 

[mymilkexpired]

my xoom only detects my d7000 when it has 2 memory cards inserted in it. Well, it opens the gallery app with only 1 card loaded but shows 0 pics regardless of whether there are jpegs on the card or not. I'm running rooted 3.2 with the tiamat kernel.

Put 2 cards in and it works great! Now if only I could figure out how to get the raw images off the camera without a card reader...

This is good know that it is working. I'll have to keep playing with it and see, maybe get another OTG cable just to be sure.

 

[BlimpyBoy]

Yeah, using the wrong OTA adapter would cause you problems. If a flash drive works with the adapter, the D7000 should work too.

 

[royace]

Alternative method to OTP

Hi..
I also have nikon d7000 but i never use otg to tranfer my files. But if you want to transfer your files you can use other alternative methods to otg such as wifi sd card which share files with wireless connection or your can use Nikon d7000 camera firmware A:104/B:1.05 which is need to be install in your OS and then you can simply work on it. For more help and other alternative ways you can use nikon d7000 manual.