[v9] Aidan's ROM [S905X-S905W-S912-S905X2-S905Y2-S905X3-S905W4-S922] [Android TV 9] [Disney+] [Google Play Certified] [ROOT]

Search This thread

falcoman33

Member
Apr 30, 2011
6
0
hello, i have 3.+[v9]+Aidan's+ROM+[S905X]+[ATV+9]+(RTL+-+QCA9377+-+LTM8830) for my a95x nexbox.

All is good except IR remote control.

I download Nexbox_Remote.zip which contain files.:
/system
/ meta inf...

I don t know how to transfert to my box.

Can someone help to boot into TWRM too? i don t know which version to use ?

Thans you for your help
 

joranto

Member
Nov 10, 2018
40
3
Google Pixel 3
Hello everyone, for those who can have some update problem after installing some of these Roms, which in my case, the RESET button is disabled, which did not allow me to reinstall any other ROMS. The solution that you use and function 100%, was loading an APK Remote ADB, which allowed me to connect directly to the operating system from the same TVBox, run "reboot update" and when you restart the new ROMs that had in the microSD. I clarify that the FW version for the P281 card does not charge and stick at the start and only asquered as it says "AndroidTV" and does not advance, as just like the other 2 ROMs for the S905W, none works for the front panel where it indicates The time but if you finish loading. At the moment I will use the FW of the TX3 Mini Aliceux Android 9, which if you activate the front panel and it works smoothly on my TVBOX Philco ATV11 Android 9. Change the FW of my TVBOX because from one day to another began to reject all WiFi connections. If at some point the FW are tualized for the S905W-P281, enabling the front panel, WiFi and remote control, I will be installed again. Greetings to all.
Hello friend can you help me get the APK Remote ADB application that you mention or if you had it you can share it with me please?
Hola amigo me puedes ayudar a conseguir la aplicación APK Remote ADB que mencionas o si la tuvieras me la puedes compartir por favor?
 

ze7zez

Recognized Contributor

joranto

Member
Nov 10, 2018
40
3
Google Pixel 3
Las versiones V9 también tienen problemas con el infrarrojo y con la pantalla del TVBox, la versión p281 del V9 no carga y es IMG no rar, pero no termina de bootear después del flasheo. Lo que yo hice , fue cargar un IMG de TX3 mini y me funciona súper y me resuelve errores de wifi que tenía con la versión de stock de mi TVBox ATV11 PHILCO.
Do you have a photo or image of your friend plate? I want to know if it's similar to mine. I have a G10max p281. I Install 1. [v9] Aidan's ROM [S905W] [ATV 9] (P281).rar, I do well with the wifi but not with the remote.
Tienes una foto o imagen de tu placa amigo? Quiero saber si es similar a la mía. Tengo un G10max p281. Instalé 1. [v9] Aidan's ROM [S905W] [ATV 9] (P281).rar, me va bien con el wifi pero no con el control remoto.
 
Last edited:

Darko69

New member
Apr 14, 2014
1
0
SANTIAGO
Hi, first all, thank a lot for your work!!!!!
I tested version 9 of @aidanmacgregor on the X96 Box.
Detail:
CPU S905X, 1 GB RAM, 8 ROM, WIFI CHIP RTL 8189ETV
The working rom is:
3. + [V9] + Aidan's + ROM + [S905X] + [ATV + 9] + (RTL + - + QCA9377 + - + LTM8830)
WIFI WORKING!!!!

Flash guide:
- use Amlogic_USB_Burning_Tool_v2.2.4( LATEST VERSION NOT WORK FOR ME)
- load the rom
- start the flash
- hold down the reset button under AV with a toothpick and connect a male / male usb cable between box and pc.
- as soon as the PC recognizes the box, remove the toothpick

Others:
Remote control misconfigured.
HBOMAX no sound
you tube Revanced work fine.

I hope this help to somebody.
 

Attachments

  • IMG_20220822_203405.jpg
    IMG_20220822_203405.jpg
    358.5 KB · Views: 48
  • IMG_20220822_173320.jpg
    IMG_20220822_173320.jpg
    716 KB · Views: 42
  • IMG_20220822_172347.jpg
    IMG_20220822_172347.jpg
    625.4 KB · Views: 49
  • IMG_20220821_152957.jpg
    IMG_20220821_152957.jpg
    2.2 MB · Views: 45
  • IMG_20220821_153021.jpg
    IMG_20220821_153021.jpg
    1.7 MB · Views: 45
Tanix TX3 s905x3 4/64 B4 with lan 100m tested(on picture),like BZ revision,
work ok but buggy wifi,bt too.Slimbox work great but bt not work.
Tanix TX9S s912 2/8 no bt,dont instal,stoped on 89%.Slimbox work great.

Screenshot 2022-08-23 at 10-06-16 Screenshot_2021-08-02 REVIEW Tanix TX3 a new low-cost TV-Box...png
 
Last edited:

joranto

Member
Nov 10, 2018
40
3
Google Pixel 3
Hi everyone. I'm on rooted rom. Like many I have problems with the original remote control. But I bought the G20s Pro one and it goes great with the box, it works great. I share my images.
 

Attachments

  • PXL_20220824_195024532_2.jpg
    PXL_20220824_195024532_2.jpg
    387.6 KB · Views: 48
  • PXL_20220824_184327980.jpg
    PXL_20220824_184327980.jpg
    1.1 MB · Views: 49
  • PXL_20220824_184415399_2.jpg
    PXL_20220824_184415399_2.jpg
    1 MB · Views: 47

falcoman33

Member
Apr 30, 2011
6
0
and anoher question please, these rom are not rooted? no?and how to root them?
thanks again
solved for this problem with magix
 
Last edited:

stergis

Member
Mar 8, 2008
22
1
Mesolonghi&CHania Crete
guys i feel that i am n00b , but i want help ,
i have the s905x b7n but i cant understand how to flash it.
i have to connect the box with pc with USB A to USB A?
the box must be power on ? i
i connect the box with my pc with a cisco serial usb a to usb a cable but pc cant recognise it as device.
 
Feb 18, 2013
12
3
guys i feel that i am n00b , but i want help ,
i have the s905x b7n but i cant understand how to flash it.
i have to connect the box with pc with USB A to USB A?
the box must be power on ? i
i connect the box with my pc with a cisco serial usb a to usb a cable but pc cant recognise it as device.
USB A to A cable. Amlogic USB burning tool usually also install the needed drivers. Once you have opened the program and loaded the firmware you connect the unpowered device holding the power button( to put it in bootloader mode), then once it has been recognized you can flash.
 
Last edited:
  • Like
Reactions: stergis

SimonFoxcoon

Member
Nov 12, 2020
27
5
Razer Phone 2
Nintendo Switch
How do I find out which image is for me? Using tools to find out about this TV box I have says the board is p21x and says Amlogic in many different places. Opening up the box shows a sticker with the text VS-CHE171107KM 2G+8G. I can't find an Amlogic chip, I suspect it's behind the heatsink but I'm not comfortable taking it off. It's a VMEDIA VBOX7 if anyone is wondering. I can't seem to find anything on this. It came with Android 7.1.2. Will provide images if anyone asks.
edit: "M8S_PRO_PLUS_VBOX_7"
so, S905X?
second edit: i tried amlogic cart burn tool, and the usb burning tool. it won't show up on the usb tool. and the box doesn't show the .img when i try and select it.
 
Last edited:

_Gadget_

New member
Mar 3, 2016
4
0
Flashed v9 on Tanix TX8 (S912 2/32). Everything seems to be working and smoth.

Sadly, no Chromecast and Netflix.

Bug that I found:
- After wake from sleep, wifi is disabled. Have to enable it manually.

It breathe a new life to my old box, new fresh look, and more remote friendly.


Any help in how you did this (Tips on version you used (generic or other) etc)? I've been battling with these boxes for far too long, and just can not seem to even get it to boot into recovery :/

edit: Never mind, used 2. [v9] Aidan's ROM [S912] [ATV 9] [DDR3 & DDR4] [LAN1000].img and sacrificed my spare Tanix TX8 as the guinea pig, and it seems to be working fine.

I still have to go through the settings of the thing to see what is/isn't working, but so far so good :)

Ps. BIG thanks to Aidan for the work he's put into it, I will be offering my thanks in the form of a "cup of coffee" very shortly 👍👍👍
 
Last edited:

deep4434

New member
Sep 7, 2022
3
0
T95Q not getting picked up by usb tool. I had reset button pressed and connected usb cables for two minutes but no sound and didnt show up.
 
Last edited:

Klein69

New member
Jan 31, 2017
2
0
hello
i just installed +[v9]+Aidan's+ROM+[S905X]+[ATV+9]+(Universal+RTL+&&+BCM) on my tv box mini m8s II , amlogic s905x but it is in a loop showing android tv.

I would like to know if I chose the right vesion or how I could solve this problem.

thanks
 

Top Liked Posts

  • 1
    Is the one you gave me more appropriate?
    It's for LB revision (white label: M8S PRO LS912 3GB 32GB DDR3 LB).

    ...if I want to change the rom will touch me bridge...
    Short pads, of missing reset button (marked red) and hold...

    m8s_pro.jpg


    The rest should be answered by someone who actually owns this box
  • 1
    The chip is TLL9082es...
    Not supported anymore (no driver sources available ???). :unsure:
    1
    I am trying to install the V9 on a GT1 Ultimate but with no luck so far. My GT1 has the AP6255 Wifi module, and the SN seems to be 706DO (white sticker glued to the PCB).

    I'm using USB burning tool v2.2.0, and the ROM version i'm trying to install is this one [v9] Aidan's ROM (GT1 Ultimate) (AP6255) [S912] [ATV 9] [LPDDR3].

    Before the update I select Erase flash (normal) and unselect erase bootloader.
    At the end of the update the tool gives me an update successfull message.
    But when it try to boot the GT1 it is not booting up (just the white LED and then no reaction at all), when I plug it back to the PC it is not recognised by the USB burning tool and i need to do the nand chip short to force the tool to recognize the GT1 and alow me to flash the stock ROM.

    Does anyone have any ideas to allow me to flash this ROM?
    I think that this rom does not work on Beelink devices. I have GT King Pro, and also without success. I am stuck in the boot loop, but I can reflash it via the Burning tool. :(
    1
    Is the one you gave me more appropriate?
    It's for LB revision (white label: M8S PRO LS912 3GB 32GB DDR3 LB).

    ...if I want to change the rom will touch me bridge...
    Short pads, of missing reset button (marked red) and hold...

    m8s_pro.jpg


    The rest should be answered by someone who actually owns this box
  • 51
    to brighten.png
    Home Screen With Apps
    Screenshot_20210725-010734.png
    ^^^NEW Home Screen, Update From Play Store ^^^
    Screenshot_20210725-010752.png

    Preinstalled Apps
    Screenshot_20210712-104107.png

    Initial Set Up Screen
    Screenshot_20210712-104128.png

    Initial Set Up Screen 2
    Screenshot_20210725-010826.png

    About
    Screensaver.png

    New Google Dream X Included
    Screenshot_20201116-025413 - Copy.png

    Google Play Protect Certified

    This is My Android 9.0 Firmware, This Is Based On The Official Mi Box Android TV 9.0 Firmware

    This Is A Firmware Port Of The Xiaomi Mi Box Firmware Designed To Run On Other Amlogic Devices

    This Firmware Is FAST & STABLE

    WARNING: This Is Experimental & Requires Multiple Steps, Please Read About "Mask Rom Mode" To Know How To Recover Your Device If Installation Fails!
    This Has The New Amlogic Kernel And May Not Work On All Device

    How To Install

    Use USB Burning Tool, See Website

    Wait Up To 5 Mins For Firmware To Boot For First Time & Proceed Through Initial Set Up


    Enjoy!

    -----------------------
    Download!
    >>>> Website Click Here <<<<
    Website Updated March 2022

    -----------------------




    v9 New Features (17.March.2022)
    BASED ON LATEST MI BOX Official Pie Build 3933
    Security Patch 5.July.2021
    More Games Controller Support
    Moved More to the system
    More Devices
    New Files App
    Rotation App
    More Games Controller Support
    Probably More

    v8 New Features (25.July.2021)
    BASED ON LATEST MI BOX Official Pie Build 3595
    Security Patch 5.March.2021
    Low Ram False All Roms
    Forceencrypt Disabled
    Default Volume MAX
    New Bootanimation
    More Debloating
    DPI Set At 320/213
    New Welcome (Thanks AcidIce18)
    No Remote Pair Screen
    More Cleaned & De Bloat
    More Tweaks...

    v7 New Features (29.April.2021)
    BASED ON LATEST MI BOX Official Pie Build 3409
    Security Patch 5.January.2021
    Now Includes App Drawer (Non Tv Apps)
    Now Includes File Browser
    Cleaned & De Bloat
    More Tweaks...

    v6 New Features (N/A)
    Not Released On This Chip

    v5 New Features (N/A)
    Not Released On This Chip

    v4 New Features (16.Nov.2020)
    1st Update After OTA Update Available Notification
    BASED ON LATEST MI BOX Official Pie Build 3139
    Security Patch 5.October.2020
    NTFS & exFAT USB Drive Support Added
    Removed Mi Tv Analytics
    Bug Report Sender Removed

    v3 New Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    New Google Keyboard From Chromecast With Google TV
    New Boot animation
    Enabled 14 Wi-Fi Channels
    Updated Google Play Store
    De Bloat System
    Remove Chromecast
    Remove Google Play Games, Music & Video
    Remove Netflix & Prime Video
    Reduced img Size For Faster Download
    Reduced Install Time
    More Tweaks

    v2 New Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    Created USB Burning tool Image
    New Install Method Now 1 Step Install

    v1 Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    Original Install Method Using base ROM & Update.ZIP

    How To Install

    Use USB Burning Tool, See Website

    Wait Up To 5 Mins For Firmware To Boot For First Time & Proceed Through Initial Set Up

    Enjoy!

    USB Burning Tool Cant See Device
    if usb burning tool cant detect your device, and you've tried other ports, cables etc then Mask ROM Mode May Be Needed, See Here
    Youtube Unbrick Guide

    Netflix wont work from play store
    The TV Version of Netflix needs Widevine Level 1 DRM, This cannot be added to your device with a firmware, Patched Netflix Apk Now Available
    SORRY NETFLIX KILLED THE TV NETFLIX MOD

    Use RAVE Or The MOBILE APP

    Amazon Prime Wont Work
    A. Like Netflix Install the mobile app, the TV version needs Widevine Level 1

    Disney+ No Sound
    A. Fixed Earlier Release

    No Root
    There Is No Root In This Firmware Because This Is a User Build (Not User Debug)
    User Build: This Is Like The official Android Tv Devices (Like Mi Box), it does not have root or TWRP, Uses Release Keys and is SELINUX enforced
    Why?
    This Makes More Apps Show Up In The Play Store that didn't show before, (Example: Isp Android TV live tv app, only shows in Play Store On non rooted and SELINUX enforced devices, also the streams in the app do not even play in rooted devices.) And other Apps With Similar Issues On Non Certified Devices....

    myCANAL App No Sound...
    See This Post
    8
    8
    TO EVERYONE

    updates to S905W & S912 are slow due to not having test devices, makes stability improvements hard to diagnose, wifi improvements should be easier to add without testing and i will do this ass soon as i can, i have been working on a private project in most of my free time so not had a chance to further refine these chips, thanks for being paitent :)
    4
    Is it and Android TV apk, or an apk of the mobile app? Can you share the link to that?
    Android TV apk I will upload the link
    4
    I am still running the s912 Version als Said in page 1 :) any relevant Changes? Maybe changelog? If Not i'll Stick to my Version :) thanks for your hard work!
    ahh forgot to add changelog here put on the s912 & s905w post haha will copy here :)

    v4 New Features (16.Nov.2020)
    1st Update After OTA Update Available Notification
    BASED ON LATEST MI BOX Official Pie Build 3139
    Security Patch 5.October.2020
    NTFS & exFAT USB Drive Support Added
    Removed Mi Tv Analytics
    Bug Report Sender Removed

    v3 New Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    New Google Keyboard From Chromecast With Google TV
    New Boot animation
    Enabled 14 Wi-Fi Channels
    Updated Google Play Store
    De Bloat System
    Remove Chromecast
    Remove Google Play Games, Music & Video
    Remove Netflix & Prime Video
    Reduced img Size For Faster Download
    Reduced Install Time
    More Tweaks

    v2 New Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    Created USB Burnig tool Image
    New Install Method Now 1 Step Install

    v1 Features
    BASED ON STABLE MI BOX Official Pie Build 2696
    Security Patch 5.April.2020
    Original Install Method Using base ROM & Update.ZIP