[v9] Aidan's ROM [S905X-S905W-S912-S905X2-S905Y2-S905X3-S905W4-S922] [Android TV 9] [Disney+] [Google Play Certified] [ROOT]

[kascro]

I simply cannot get my box M8S Pro L LB 3GB to get connected to my laptop (only has usb3?!?).
I am Shure i used reset points good since I can hear on my laptop s quick connect/disconnect but it is so fast my device manager (windows 11) does not even detect it.
I managed to flash twrp via adb, is there a flashable zip of this rom? Or any other way to flash it without USB burning tool? I only have twrp and adb available, thank you!

 

[carrots99]

Hi,

Quite some time ago I was able to flash Aidan's ROM, I believe it was version 8.X (EDIT: just checked my previous comments back in 2021 and back then I installed V3and V4) by doing the short on the IC, but now I'm trying to do it for V9 of the ROM without success...I successfully short it, it detects the device, it starts the process, but then it keeps failing at 4% once it starts the "Download UBOOT" phase (I hear the disconnect sound and connect sound once it reaches this phase, and then it fails with the "Identify/Error result".

Am I missing something? (my board version is CS_905W_TX_V1.2)

Below is the log file details:

[12:25:22 587][HUB1-3][Inf]--Start burning...
[12:25:22 638][HUB1-3][Inf]--------------ERASE BOOTLOADER------------
[12:25:22 638][HUB1-3][Inf]-------------Download DDR.USB-----------
[12:25:22 638][HUB1-3][Inf]--2-2-0-0
[12:25:22 638][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:25:23 139][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:25:23 640][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:25:24 142][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:25:24 643][HUB1-3][Inf]--Write initial succeed
[12:25:24 643][HUB1-3][Inf]--Upload encrypt at 0xc8100228
[12:25:24 643][HUB1-3][Inf]--ulValue = 0xadfc318c
[12:25:24 643][HUB1-3][Inf]--Read encrypt value succeed
[12:25:24 643][HUB1-3][Inf]--Download DDR.USB,size: 49152!
[12:25:24 655][HUB1-3][Inf]--Transfer complete 49152
[12:25:24 656][HUB1-3][Inf]--Run at address 0xd9000000
[12:25:24 657][HUB1-3][Inf]--RunInRam success
[12:25:24 677][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:24 677][HUB1-3][Inf]--CheckFileRunState return 8
[12:25:24 677][HUB1-3][Inf]--Run at address 0xd900c000
[12:25:24 677][HUB1-3][Inf]--RunInRam succeed
[12:25:24 737][HUB1-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
[12:25:24 737][HUB1-3][Inf]--ddrCapacity:0x 800
[12:25:24 738][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:24 738][HUB1-3][Inf]-------------Download UBOOT.USB-----------
[12:25:24 738][HUB1-3][Inf]--Get Encrpt ulValue = 0xadfc318c
[12:25:24 738][HUB1-3][Err]--download 1 time!
[12:25:24 738][HUB1-3][Inf]--Download UBOOT.USB buffer at 0x0200c000
[12:25:24 827][HUB1-3][Inf]--Transfer complete
[12:25:25 028][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 030][HUB1-3][Inf]--DownCheckPara succeed
[12:25:25 031][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 031][HUB1-3][Inf]--RunInAddr at address 0xd900c000
[12:25:25 068][HUB1-3][Inf]--ReadCheckPara succeed
[12:25:25 069][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 069][HUB1-3][Inf]--DownRunPara succeed
[12:25:25 071][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 071][HUB1-3][Inf]--RunInAddr at address 0xd900c000
[12:25:26 713][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[12:25:26 713][Global][Inf]--Scan usb device
[12:25:26 713][Global][Inf]--Aml scan WorldCup Device
[12:25:26 715][Global][Inf]--Host: USB xHCI Compliant Host Controller
[12:25:26 715][Global][Inf]--DevPath:\\?\pci#ven_1912&dev_0015&subsys_c0cd144d&rev_02#4&2c3630ce&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:26 715][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&367024fd&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 715][Global][Inf]-------->[Port0]NoDeviceConnected
[12:25:26 715][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:26 715][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:26 716][Global][Inf]-------->[Port3]Other device
[12:25:26 717][Global][Inf]--Host: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
[12:25:26 717][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_c0d3144d&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:26 717][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&36881e27&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 717][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&14fd1feb&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 718][Global][Inf]---------->[Port0]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port1]Other device
[12:25:26 719][Global][Inf]---------->[Port2]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port3]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port4]Other device
[12:25:26 720][Global][Inf]---------->[Port5]Other device
[12:25:26 720][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:26 720][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:26 720][Global][Inf]--Scan USB host controller complete
[12:25:26 721][Global][Inf]--Update data center with HubMap
[12:25:26 721][Global][Inf]--Update hub1 device data
[12:25:26 721][Global][Inf]--Update HUB1-1
[12:25:26 721][HUB1-1][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-2
[12:25:26 721][HUB1-2][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-3
[12:25:26 721][HUB1-3][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-4
[12:25:26 721][HUB1-4][Inf]--Update device path
[12:25:26 721][Global][Inf]--Scan end
[12:25:26 737][HUB1-3][Inf]--Device is removed
[12:25:28 468][Global][Inf]--Catch DBT_DEVICEARRIVAL
[12:25:28 469][Global][Inf]--Scan usb device
[12:25:28 469][Global][Inf]--Aml scan WorldCup Device
[12:25:28 470][Global][Inf]--Host: USB xHCI Compliant Host Controller
[12:25:28 470][Global][Inf]--DevPath:\\?\pci#ven_1912&dev_0015&subsys_c0cd144d&rev_02#4&2c3630ce&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:28 470][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&367024fd&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 470][Global][Inf]-------->[Port0]NoDeviceConnected
[12:25:28 470][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:28 471][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[12:25:28 472][Global][Inf]-------->[Port3]Other device
[12:25:28 473][Global][Inf]--Host: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
[12:25:28 473][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_c0d3144d&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:28 473][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&36881e27&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 473][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&14fd1feb&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 473][Global][Inf]---------->[Port0]NoDeviceConnected
[12:25:28 474][Global][Inf]---------->[Port1]Other device
[12:25:28 474][Global][Inf]---------->[Port2]NoDeviceConnected
[12:25:28 474][Global][Inf]---------->[Port3]NoDeviceConnected
[12:25:28 475][Global][Inf]---------->[Port4]Other device
[12:25:28 476][Global][Inf]---------->[Port5]Other device
[12:25:28 476][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:28 476][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:28 476][Global][Inf]--Scan USB host controller complete
[12:25:28 476][Global][Inf]--Update data center with HubMap
[12:25:28 476][Global][Inf]--Update hub1 device data
[12:25:28 476][Global][Inf]--Update HUB1-1
[12:25:28 476][HUB1-1][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-2
[12:25:28 476][HUB1-2][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-3 \\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[12:25:28 476][HUB1-3][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-4
[12:25:28 476][HUB1-4][Inf]--Update device path
[12:25:28 476][Global][Inf]--Scan end
[12:25:28 518][HUB1-3][Inf]--Device is connected
[12:25:28 518][HUB1-3][Inf]--Close device handle 0x00000dd8
[12:25:28 569][HUB1-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000d94
[12:25:31 620][HUB1-3][Inf]--2-2-0-0
[12:25:31 620][HUB1-3][Err]--CheckFileRunState failed
[12:25:31 639][HUB1-3][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[12:25:31 640][HUB1-3][Inf]--Close device handle 0x00000d94

 

[carrots99]

Hi,

Quite some time ago I was able to flash Aidan's ROM, I believe it was version 8.X (EDIT: just checked my previous comments back in 2021 and back then I installed V3and V4) by doing the short on the IC, but now I'm trying to do it for V9 of the ROM without success...I successfully short it, it detects the device, it starts the process, but then it keeps failing at 4% once it starts the "Download UBOOT" phase (I hear the disconnect sound and connect sound once it reaches this phase, and then it fails with the "Identify/Error result".

Am I missing something? (my board version is CS_905W_TX_V1.2)

Below is the log file details:

[12:25:22 587][HUB1-3][Inf]--Start burning...
[12:25:22 638][HUB1-3][Inf]--------------ERASE BOOTLOADER------------
[12:25:22 638][HUB1-3][Inf]-------------Download DDR.USB-----------
[12:25:22 638][HUB1-3][Inf]--2-2-0-0
[12:25:22 638][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:25:23 139][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:25:23 640][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x000000b1
[12:25:24 142][HUB1-3][Inf]--Control write pll reg1 0xd9000000:0x00005183
[12:25:24 643][HUB1-3][Inf]--Write initial succeed
[12:25:24 643][HUB1-3][Inf]--Upload encrypt at 0xc8100228
[12:25:24 643][HUB1-3][Inf]--ulValue = 0xadfc318c
[12:25:24 643][HUB1-3][Inf]--Read encrypt value succeed
[12:25:24 643][HUB1-3][Inf]--Download DDR.USB,size: 49152!
[12:25:24 655][HUB1-3][Inf]--Transfer complete 49152
[12:25:24 656][HUB1-3][Inf]--Run at address 0xd9000000
[12:25:24 657][HUB1-3][Inf]--RunInRam success
[12:25:24 677][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:24 677][HUB1-3][Inf]--CheckFileRunState return 8
[12:25:24 677][HUB1-3][Inf]--Run at address 0xd900c000
[12:25:24 677][HUB1-3][Inf]--RunInRam succeed
[12:25:24 737][HUB1-3][Inf]--runResult:0x 0,paraMagic:0x7856efab
[12:25:24 737][HUB1-3][Inf]--ddrCapacity:0x 800
[12:25:24 738][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:24 738][HUB1-3][Inf]-------------Download UBOOT.USB-----------
[12:25:24 738][HUB1-3][Inf]--Get Encrpt ulValue = 0xadfc318c
[12:25:24 738][HUB1-3][Err]--download 1 time!
[12:25:24 738][HUB1-3][Inf]--Download UBOOT.USB buffer at 0x0200c000
[12:25:24 827][HUB1-3][Inf]--Transfer complete
[12:25:25 028][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 030][HUB1-3][Inf]--DownCheckPara succeed
[12:25:25 031][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 031][HUB1-3][Inf]--RunInAddr at address 0xd900c000
[12:25:25 068][HUB1-3][Inf]--ReadCheckPara succeed
[12:25:25 069][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 069][HUB1-3][Inf]--DownRunPara succeed
[12:25:25 071][HUB1-3][Inf]--2-2-0-8-0-1-0-0
[12:25:25 071][HUB1-3][Inf]--RunInAddr at address 0xd900c000
[12:25:26 713][Global][Inf]--Catch DBT_DEVICEREMOVECOMPLETE
[12:25:26 713][Global][Inf]--Scan usb device
[12:25:26 713][Global][Inf]--Aml scan WorldCup Device
[12:25:26 715][Global][Inf]--Host: USB xHCI Compliant Host Controller
[12:25:26 715][Global][Inf]--DevPath:\\?\pci#ven_1912&dev_0015&subsys_c0cd144d&rev_02#4&2c3630ce&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:26 715][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&367024fd&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 715][Global][Inf]-------->[Port0]NoDeviceConnected
[12:25:26 715][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:26 715][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:26 716][Global][Inf]-------->[Port3]Other device
[12:25:26 717][Global][Inf]--Host: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
[12:25:26 717][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_c0d3144d&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:26 717][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&36881e27&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 717][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&14fd1feb&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:26 718][Global][Inf]---------->[Port0]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port1]Other device
[12:25:26 719][Global][Inf]---------->[Port2]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port3]NoDeviceConnected
[12:25:26 719][Global][Inf]---------->[Port4]Other device
[12:25:26 720][Global][Inf]---------->[Port5]Other device
[12:25:26 720][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:26 720][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:26 720][Global][Inf]--Scan USB host controller complete
[12:25:26 721][Global][Inf]--Update data center with HubMap
[12:25:26 721][Global][Inf]--Update hub1 device data
[12:25:26 721][Global][Inf]--Update HUB1-1
[12:25:26 721][HUB1-1][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-2
[12:25:26 721][HUB1-2][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-3
[12:25:26 721][HUB1-3][Inf]--Update device path
[12:25:26 721][Global][Inf]--Update HUB1-4
[12:25:26 721][HUB1-4][Inf]--Update device path
[12:25:26 721][Global][Inf]--Scan end
[12:25:26 737][HUB1-3][Inf]--Device is removed
[12:25:28 468][Global][Inf]--Catch DBT_DEVICEARRIVAL
[12:25:28 469][Global][Inf]--Scan usb device
[12:25:28 469][Global][Inf]--Aml scan WorldCup Device
[12:25:28 470][Global][Inf]--Host: USB xHCI Compliant Host Controller
[12:25:28 470][Global][Inf]--DevPath:\\?\pci#ven_1912&dev_0015&subsys_c0cd144d&rev_02#4&2c3630ce&0&00e4#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:28 470][Global][Inf]---->Roothub:USB#ROOT_HUB30#5&367024fd&0&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 470][Global][Inf]-------->[Port0]NoDeviceConnected
[12:25:28 470][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:28 471][Global][Inf]-------->[Port2]\\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[12:25:28 472][Global][Inf]-------->[Port3]Other device
[12:25:28 473][Global][Inf]--Host: Intel(R) 7 Series/C216 Chipset Family USB Enhanced Host Controller - 1E26
[12:25:28 473][Global][Inf]--DevPath:\\?\pci#ven_8086&dev_1e26&subsys_c0d3144d&rev_04#3&11583659&0&e8#{3abf6f2d-71c4-462a-8a92-1e6861e6af27}
[12:25:28 473][Global][Inf]---->Roothub:USB#ROOT_HUB20#4&36881e27&0#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 473][Global][Inf]-------->[Port0]USB#VID_8087&PID_0024#5&14fd1feb&0&1#{f18a0e88-c30c-11d0-8815-00a0c906bed8}
[12:25:28 473][Global][Inf]---------->[Port0]NoDeviceConnected
[12:25:28 474][Global][Inf]---------->[Port1]Other device
[12:25:28 474][Global][Inf]---------->[Port2]NoDeviceConnected
[12:25:28 474][Global][Inf]---------->[Port3]NoDeviceConnected
[12:25:28 475][Global][Inf]---------->[Port4]Other device
[12:25:28 476][Global][Inf]---------->[Port5]Other device
[12:25:28 476][Global][Inf]-------->[Port1]NoDeviceConnected
[12:25:28 476][Global][Inf]-------->[Port2]NoDeviceConnected
[12:25:28 476][Global][Inf]--Scan USB host controller complete
[12:25:28 476][Global][Inf]--Update data center with HubMap
[12:25:28 476][Global][Inf]--Update hub1 device data
[12:25:28 476][Global][Inf]--Update HUB1-1
[12:25:28 476][HUB1-1][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-2
[12:25:28 476][HUB1-2][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-3 \\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed}
[12:25:28 476][HUB1-3][Inf]--Update device path
[12:25:28 476][Global][Inf]--Update HUB1-4
[12:25:28 476][HUB1-4][Inf]--Update device path
[12:25:28 476][Global][Inf]--Scan end
[12:25:28 518][HUB1-3][Inf]--Device is connected
[12:25:28 518][HUB1-3][Inf]--Close device handle 0x00000dd8
[12:25:28 569][HUB1-3][Inf]--Open device handle \\?\usb#vid_1b8e&pid_c003#6&3011793f&0&3#{a5dcbf10-6530-11d2-901f-00c04fb951ed} 0x00000d94
[12:25:31 620][HUB1-3][Inf]--2-2-0-0
[12:25:31 620][HUB1-3][Err]--CheckFileRunState failed
[12:25:31 639][HUB1-3][Err]--[0x10303004]Romcode/Switch status/Identify/Error result
[12:25:31 640][HUB1-3][Inf]--Close device handle 0x00000d94

FYI, after some trial and error I did the following:
- Tried to flash the TX3-Mini-TX9 firmware, that's supposed to work with this version, and it failed;
- Retried to flash the V9 of Aidan's ROM and finally went through...but now it's failing at 86% while flashing system:

"[13:37:39 917][HUB1-3][Err]--Continue:34
[13:37:39 944][HUB1-3][Err]--[0x30405004]UBOOT/???? system/????/????????"

...not sure what to do next...

 

[Nin2k]

I have X96 mini SoC s905w2 and s905L, I can't find the android 7 or 9 .... help me ?

 

[vacs03]

hi, i have the mecool m8s pro+ with s905x, the wifi works on the v7.5 rom, but on the v9 it doesn't, how do i fix this?

 

[paiktaras]

this rom it is is compatible with m8s pro L ( 3/32 -S912 ) ?

 

[mAtvXk]

m8s pro L ( 3/32 -S912 )

It depends on hardware revision (LB, LS ...)

Downloads for : Amlogic Media Players | AndroidFileHost.com | Download GApps, Roms, Kernels, Themes, Firmware and more. Free file hosting for all Android developers.

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.

androidfilehost.com

 

[mAtvXk]

the wifi works on the v7.5 rom, but on the v9 it doesn't, how do i fix this?

Choose the right build that matches your wi-fi chip.

 

[mAtvXk]

...SoC s905w2 and s905L...

Both are not supported, try with custom FW from other devs.

 

[vacs03]

Choose the right build that matches your wi-fi chip.

The chip is TLL9082es...i guess it's realtek? I tried every build with the realtek name in it except the lpddr3 which can't be installed

 

[mAtvXk]

The chip is TLL9082es...

Not supported anymore (no driver sources available ???).

 

[seugirdor]

I am trying to install the V9 on a GT1 Ultimate but with no luck so far. My GT1 has the AP6255 Wifi module, and the SN seems to be 706DO (white sticker glued to the PCB).

I'm using USB burning tool v2.2.0, and the ROM version i'm trying to install is this one [v9] Aidan's ROM (GT1 Ultimate) (AP6255) [S912] [ATV 9] [LPDDR3].

Before the update I select Erase flash (normal) and unselect erase bootloader.
At the end of the update the tool gives me an update successfull message.
But when it try to boot the GT1 it is not booting up (just the white LED and then no reaction at all), when I plug it back to the PC it is not recognised by the USB burning tool and i need to do the nand chip short to force the tool to recognize the GT1 and alow me to flash the stock ROM.

Does anyone have any ideas to allow me to flash this ROM?

 

[DasXardas]

I am trying to install the V9 on a GT1 Ultimate but with no luck so far. My GT1 has the AP6255 Wifi module, and the SN seems to be 706DO (white sticker glued to the PCB).

I'm using USB burning tool v2.2.0, and the ROM version i'm trying to install is this one [v9] Aidan's ROM (GT1 Ultimate) (AP6255) [S912] [ATV 9] [LPDDR3].

Before the update I select Erase flash (normal) and unselect erase bootloader.
At the end of the update the tool gives me an update successfull message.
But when it try to boot the GT1 it is not booting up (just the white LED and then no reaction at all), when I plug it back to the PC it is not recognised by the USB burning tool and i need to do the nand chip short to force the tool to recognize the GT1 and alow me to flash the stock ROM.

Does anyone have any ideas to allow me to flash this ROM?

I think that this rom does not work on Beelink devices. I have GT King Pro, and also without success. I am stuck in the boot loop, but I can reflash it via the Burning tool.

 

[tinko975]

I have beelink gt1 mini 4/64, LPDDR4 version.
Is there stock firmware?
How to instal this rom?

S905X2 – a i d a n r o m ®

aidanrom.com

Do i need only pc, usb burning tool and usb otg cable?

Where ro find stock rom? All beelink firmware on their servers are deleted..

 

[kalarepa]

Which ROM will work on the T95z max box? I tried to flash "[v9]+Aidan's+ROM+(Mecool+M8S+Pro)+(3-32GB)+[S912]+[ATV+9]" and bricked the box.
And these are the names of the components from my box:
H9TQ26ADFTAC URKUM --- emmc flash NAND
H9TQ26ADFTBC URKUM --- emmc flash NAND
H82409s - Ethernet
AP6255 - WiFi
FD628 - LED controller
RAM DDR3 - 3GB
ROM 32GB
CPU Amlogic S912.

 

[Ujua]

Hello, I have this box with original android 7.1, and I'm seeing that the v9 version of this ROM exists, but I have doubts if the wi-fi and bluetooth will work for me, because I see that they don't work on some devices, does anyone Has anyone tried this ROM on this box? I have also read in some forums that this box does not have a reset button, although I have also seen some say that the reset hole is this one that I put in a red circle... please, if someone has this device and has put this ron I would appreciate your help..

Thanks
Regards

 

[mAtvXk]

...I'm seeing that the v9 version of this ROM exists,,,

[v9] Aidan's ROM [S912] [ATV 9] [LPDDR3] [LAN100] (bcm4335...) (KM6335) (M8S PRO L LB...).rar

...I have doubts if the wi-fi and bluetooth will work for me...

Open the box and make visual inspection, and also check if reset button is present.

 

[Ujua]

[v9] Aidan's ROM [S912] [ATV 9] [LPDDR3] [LAN100] (bcm4335...) (KM6335) (M8S PRO L LB...).rar


Open the box and make visual inspection, and also check if reset button is present.

Hello again, I have opened the box and where is the hole that I marked with the red circle, I only see a bit of copper, and something that says k1, I think it is not a reset button, so I think that if I want to change the rom will touch me bridge.
On the other hand... will wifi and bluetooth work fine in the box with this ROM? Also... could you tell me where the original roms of this box are in case I have to go back?
I understood that this rom was the right one for my box

[v9] Aidan's ROM (Mecool M8S Pro) (3-32GB) [S912] [ATV 9].rar | by Aidan Macgregor for Media Players

Download GApps, Roms, Kernels, Themes, Firmware, and more. Free file hosting for all Android developers.

androidfilehost.com

Is the one you gave me more appropriate?

Thanks.
Cheers

 

[mAtvXk]

Is the one you gave me more appropriate?

It's for LB revision (white label: M8S PRO LS912 3GB 32GB DDR3 LB).

...if I want to change the rom will touch me bridge...

Short pads, of missing reset button (marked red) and hold...

The rest should be answered by someone who actually owns this box

 

[Ujua]

ok, thanks, I'm going to investigate the bluetooth and WiFi modules, because I see that they don't match the ones in the rom, and I don't know if it will be valid for the ones in my box, I wouldn't like to be left with a paperweight.
Thanks.