Vendor image is not matching my system

Rocky7177 · Nov 5, 2020 13 0 0

I have a Moto G turbo (Merlin) and i installed Havoc OS in it. Everything works fine except the Camera and the proximity sensor. Whenever I open camera it crashes. I have installed many camera apps and tried it. In the sock rom it used to work fine. Also when I get a call I get a call my screen turns blank and I am not able to attend it.

I think there is some problem with the vendor image cause whenever I switch off my phone and turn it on again it gives an error "
The vendor image does not match system. Please flash the MPDS24.107-56-1-28 vendor image for you device"

Please tell me a way to fix this. I searched for the vendor image in my stock rom but i just found a .xml file that has a similar name. I don't know how to flash an xml file. It would be gr8 if anyone could please provide me with the vendor image for my phone and tell me how to flash it so that I could get this error fixd and take photos again!!

R1ffR4ff · Nov 5, 2020 at 10:00 AM

I've never had to flash an .xml image but until you get a better answer there are other Roms you can try,

https://www.getdroidtips.com/custom-rom-moto-g3-turbo/

Charlie-117 · Sep 18, 2020 13 0 1

I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.

I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.

I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).

Actually I am using Havoc os version 3.9 the latest one and still ty big exists. For the call error thing, I just turned off proximity sensor.

But I am still not able to take any photos. Pls help

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
I am assuming that you are using HavocOS 2.x (pie) by Archer , i believe that the camera bug was resolved in future updates. And about the vendor image mismatch error, it is nothing to be worried about just ignore that (it is not causing the bugs). About the call issue it is something that I am unaware of. Also please dont wipe the vendor partition and there's no real need to flash stock.

I would highly recommend you to flash the latest official TWRP 3.4.0 by Althaf or SHRP 2.3.2 and then flash newer Q ROMs, Q is more stable than P for merlin and there aren't any bugs. There are lots of Q roms available (9-10) including Havoc and other official roms (LOS,AICP).

Can you pls give me the like of the Havoc OS that is most stable with no bugs for this mobile??
I prefer Havoc due to its customisability!!

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
Can you pls give me the like of the Havoc OS that is most stable with no bugs for this mobile??
I prefer Havoc due to its customisability!!

https://www.androidfilehost.com/?fid=10763459528675577441

Are you using this one ?? This is the latest I haven't tested it yet. You will find RR by the same dev on AFH which too has good customization and should be bug free (again i haven't tested it yet,both were released yesterday), I use AICP (I am the maintainer) it has no issues.

---------- Post added at 08:15 PM ---------- Previous post was at 08:12 PM ----------

And please switch to official TWRP and reflash the rom, the vendor TWRP is not required nor recommended.

also you might wanna join merlin community at TG @motog3turbo

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577441

Are you using this one ?? This is the latest I haven't tested it yet. You will find RR by the same dev on AFH which too has good customization and should be bug free (again i haven't tested it yet,both were released yesterday), I use AICP (I am the maintainer) it has no issues.

Yes I use this one ( I flashed the previous version of 3.9 too but same bug)
Can you pls provide me of the link of RR (for my device) ??

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
Yes I use this one ( I flashed the previous version of 3.9 too but same bug)
Can you pls provide me of the link of RR (for my device) ??

https://www.androidfilehost.com/?fid=10763459528675577385

RR 8.6.3

Rocky7177 · Nov 5, 2020

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577385

RR 8.6.3

While flashing it I should first wipe system,data,and cache(and exclude boot and vendor) right and then flash gapps of Android 10(I prefer nano package)??

I also wanted to know if it supports turbo charging?

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
While flashing it I should first wipe system,data,and cache(and exclude boot and vendor) right and then flash gapps(I prefer nano package)??

First take backups (both nandroid and migrate) then flash the new TWRP 3.4.0 and then wipe system,data,cache and dalvik cache then flash the RR zip and Gapps (i too use nano) then reboot and then flash magisk if u wish to do so(required for migrate)

---------- Post added at 08:25 PM ---------- Previous post was at 08:24 PM ----------

Rocky7177 said:
I also wanted to know if it supports turbo charging?

Yes it does.

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
https://www.androidfilehost.com/?fid=10763459528675577385

RR 8.6.3

It runs on android 10 or 9? And does it support full screen gestures?

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
It runs on android 10 or 9? And does it support full screen gestures?

10 and yes it does (almost all Q roms do)

Rocky7177 · Nov 5, 2020

Charlie-117 said:
First take backups (both nandroid and migrate) then flash the new TWRP 3.4.0 and then wipe system,data,cache and dalvik cache then flash the RR zip and Gapps (i too use nano) then reboot and then flash magisk if u wish to do so(required for migrate)

---------- Post added at 08:25 PM ---------- Previous post was at 08:24 PM ----------

Yes it does.

Will there be any problem if I use my current version of twrp to flash it? If yes then can you pls yell me how to replace my current twrp recovery with the latest version??

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
Will there be any problem if I use my current version of twrp to flash it? If yes then can you pls yell me how to replace my current twrp recovery with the latest version??

There shudn't be any problems but i don't see a reason for not upgrading

https://forum.xda-developers.com/2015-moto-g/orig-development/unofficial-twrp-3-2-3-osprey-t3829999

here you go.

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
There shudn't be any problems but i don't see a reason for not upgrading

https://forum.xda-developers.com/2015-moto-g/orig-development/unofficial-twrp-3-2-3-osprey-t3829999

here you go.

Thanks a lot for the support and help!!
Will let you know how things are going on after flashing the new ROM!!

:good:

Charlie-117 · Sep 18, 2020 13 0 1

Rocky7177 said:
Thanks a lot for the support and help!!
Will let you know how things are going on after flashing the new ROM!!:good:

Best of luck :fingers-crossed:

Rocky7177 · Nov 5, 2020 13 0 0

Charlie-117 said:
Best of luck :fingers-crossed:

Yay, I finally flashed RR ROM and it works like a charm. Never imagined my device would work on Android 10.
Camera and phone work perfectly!!

R1ffR4ff · Nov 6, 2020 at 3:04 PM

Rocky7177 said:
Yay, I finally flashed RR ROM and it works like a charm. Never imagined my device would work on Android 10.
Camera and phone work perfectly!!

Glad you got it running. If ever you need to update your TWRP and the phone is rooted just use the app,

https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en_GB

:good:

Rocky7177 · Nov 5, 2020 13 0 0

R1ffR4ff said:
Glad you got it running. If ever you need to update your TWRP and the phone is rooted just use the app,

https://play.google.com/store/apps/details?id=me.twrp.twrpapp&hl=en_GB

:good:

Well, Thanks for the recommendation. I will sure try it soon.

I wanted to install GCam on my phone as it has really good photo processing capabilities. When I searched about it I came to know that I had to enable Camera2 API. So any idea on how to do it in my phone?? (Moto G Turbo - Merlin)

R1ffR4ff · Nov 6, 2020 at 6:44 PM

Rocky7177 said:
Well, Thanks for the recommendation. I will sure try it soon.

I wanted to install GCam on my phone as it has really good photo processing capabilities. When I searched about it I came to know that I had to enable Camera2 API. So any idea on how to do it in my phone?? (Moto G Turbo - Merlin)

Sorry I don't use that app. I use,"Open Camera" and I find my G5 stock Camera good enough for me as well

Vendor image is not matching my system

Member

Senior Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Member

Senior Member

Member

Senior Member