• If you are experiencing issues logging in, we moved to a new and more secure software and older account passwords were not able to be migrated. We recommend trying to reset your password, then contacting us if there are issues.
  • Nearly done! Migration cleanup is mostly done. There are a small number of issues left that we continue to work on, but all the heavy lifting is done. We still would love to hear feedback over at this thread and also check out the new XDA app! Thanks and we hope you enjoy the new forums, and thanks for your support of XDA <3

Vernee MARS

ghost45

Elite Member
Nov 10, 2012
1,481
1,147
0
[email protected]
New VERNEE MARS Modding Thread


New Modding thread for the new model Vernee Mars Helio P10 Octa core Mtk 6757

Vernee MARS MT6757 Octa Core 4G LTE 802.11ac 4GB 32GB Android 6 & 7 Smartphone 5,5 inches






Everybody are Welcome! :laugh::good:​




MANY THANKS TO OUR MODERATORS TO OPEN AGAIN THIS THREAD !
More attention to the Xda-developers Rules:
http://forum.xda-developers.com/announcement.php?f=256
Many thanks to "SUPER ADMIN" MR. MIKE

XDA:DevDB Information
Vernee MARS , ROM for all devices (see above for details)

Contributors
ghost45
ROM OS Version: 6.0.x Marshmallow

Version Information
Status: Testing

Created 2017-02-18
Last Updated 2017-03-25
 
Last edited:

ghost45

Elite Member
Nov 10, 2012
1,481
1,147
0
[email protected]
Software Section




New Official firmware:

Lollipop Android 6 (Backup By Hanuma50)
http://www.needrom.com/download/vernee-mars/

Lollipop Android 7 (Backup By Ghost45)
https://mega.nz/#!ph1X2DDQ!N9Jrob7Fla7jxy-FtOETjGqQNH4My5aycBpnfRYo_aI

Drivers :
https://mega.nz/#!D4MnFBCZ!pb-v5EeRixWXb-NRzoi2fZuaYYkclM36-1QisVyBag4
https://www.dropbox.com/s/125r5twipmdt1wn/MT6589 drivers.zip



Drivers Installation :

Procedure :
To install the USB drivers VCOM the phone must be turned off and connected to the PC with or without a battery depending on the type of device,
get a screen like this in the device manager of the computer


Once you have installed the terminal will be shown in this way (the COM port may be different)

For those who have problems with the installation of these drivers and have had in the past a terminal mtk
they may have a driver conflict, or even if you just do the confusion and installed it different,
to solve, you can try to use the program
usbdeview:
http://www.nirsoft.net/utils/trans/usbdeview_italian.zip

select all items in that report as VCOM USB Preloader in the Mediatek figure right click Unistall and restart the PC



Installation of the Firmware:

PROCEDURE
1) Setup new Firmware
download the new firmware.
Unzip the compressed file and insert into the firmware folder:
a) recovery modded (is necessary for receive right root)

Phone off without usb cable and possibly removed the battery and put back for a perfect reset .....
and hold mode 'of off without usb cable connected!
Run Flashtool version octa-core ..... select the file, and then scatter firmware upgrade


...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.


How to have right root on Vernee MARS

Procedure
Install one recovery modded through the previous link with flashtool (Flag only preloader and recovery files)


after run through recovery place the supersu zip file and you will receive, after reboot, the right root .

Attention after received the right root is not possible to apply the ota update of new firmwares.



MANY THANKS TO :
C3C076, Dearlynounou the autors of Xposed modules add on, and
Hanuma,Carliv,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me...
 
Last edited:

ghost45

Elite Member
Nov 10, 2012
1,481
1,147
0
[email protected]
New Custom Rom for Vernee MARS Based android 7

New Custom Rom Based Android 7

MARS



Details:


- Custom Rom Based Android 7 aosp official firmware (Version For FLASHTOOL)

- Pre root with Busibox
- SuperSu must be installed after installed the custom rom through flashtool

- new launcher add nova basic (must be upgraded to prime version)

- Recovery Cwm Touch

- New melodies added

- Dolby Digital

- New arrows inside

- New tricks and apps .



How Install The Custom Rom V1

1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....



2) Step (Necessary)

This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)

1) reboot in android system (7) after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .


Files to download :

Custom Rom V1
https://mega.nz/#!4lUFUSKa!zXccQ3zGaqi2y11p5ssp0JKuiT1XsNzMoN9zKwwchgQ

Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ
 
Last edited:

ghost45

Elite Member
Nov 10, 2012
1,481
1,147
0
[email protected]
New Custom Rom for Vernee MARS Based android 6

New Custom Rom Based Android 6

MARS




Details:

- Custom Rom Based Android 6 aosp (official firmware By Hanuma)

(Version For FLASHTOOL)


- Pre root with Busybox

- GravityBox (must be activated after the 2" Step Attention Please ...supersu must be installed first )

- Xstana Xposed modules for changing icons for navigation bar and more..

must be activated after the 2" Step Attention Please ...supersu must be installed first )

- new launcher add last nova 503 (must be upgraded to prime version)

- Recovery Cwm Touch By Ghost45

- New melodies added

- Dolby Digital

- New arrows inside with Xposed modules

- New tricks and Several apps

- SuperSu must be installed after installed the custom rom through flashtool.



How Install The Custom Rom V1

1) Step
Download the new firmware.
Unzip the compressed file
Phone off without usb cable ....connected!
Run Flashtool version octa-core ..... select the file scatter,
and then check that all flags are selected
also check if in the menu in the top is selected firmware upgrade
and then push the button download (green arrow) in flashtool ...... NOW ONLY CONNECT USB CABLE not before!
Wait for the end of the installation procedure of the firmware and eventually restart the phone!
This' whole simplified procedure for installing the original firmware.n progress.....



2) Step (Necessary)

This Step is to receive the right root at 100%
(in android 6 & 7 Chainfire have found one new exploit to receive right root correctly in one temporary partition .
for this moment i'm not able to save that partition and so probably in the V2 Custom rom probably will be)

1) reboot in android system after flashing process ..firmware in the step 1
2) So..copy in your exsternal SD card the file supersu xxx 2,79.zip
2) Restart the device in recovery (modded) run installing the compressed file and reboot in android system and you will find the supersu app and the right root .


Files to download :

Custom Rom V1

https://mega.nz/#!xg9EVBrI!YU8a7gSTRerwPoiaJoZN1inAMFqCbKkD1bhkNN1Y5c8


Supersu
https://mega.nz/#!cxUSkYBA!CxmVdoftoSeDGvrnaugsxFKklV7tdFa6GhN5gKgyRTQ



Many Thanks to:
Hanuma,Carliv,C3C076,Chainfire,MegTheBest, Marsapa,Cleopatra81,Tao,Stahl and all my friends that collaborate with me..
 
Last edited:
  • Like
Reactions: AnubuRe

vaorr

Member
Dec 29, 2010
44
6
8
Porto
Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!
 

ghost45

Elite Member
Nov 10, 2012
1,481
1,147
0
[email protected]
Hi! Do you change anything on bluetooth? Because on the official rom i have a bug! The phone conects with the car bluetooth (hands free Parrot) but i have no sound on phone calls, but if i disconnect my smartwatch i have sound!
Try it i have modded several things...bluetooth according me run well.
:laugh:
 

caravanman

Member
Oct 16, 2010
23
2
0
Hi, I have one of these devices that just won't boot at all (bricked?) I have no idea how to fix this, I have downloaded and tried to do the above without much luck, I did however get the recovery modded twrp for android 7 successfully flashed (I think) but still nothing, any assistance would be most helpful, I would be happy to allow someone to take over my pc, to see if they can figure it out, just getting it to boot up would be a start !