VertexOS 1.9 [UNOFFICIAL][2017/2/11] [KIPPER] [AOSP+LOS]

PS-DEV · Feb 20, 2017

HI ALL! With new Rom

VertexOS aims to provide a simple but enhanced near-stock AOSP experience with carefully selected features and an emphasis on stability and smoothness.

what doesn't work ?
everything is working perfectly.

Coming from another ROM, OR if a CLEAN FLASH is required
1) Download the Vertex... .zip file.
2) Download a 7.1 GApps package.
3) Boot into recovery (TWRP)
4) Full wipe (Dalvik Cache, Cache, System, Factory Data Reset)
5) Flash the Vertex... .zip file
6) Flash Nougat-compatible GApps : http://opengapps.org/ / ARM64,7.1,pico
7) Reboot

Download:https://www.androidfilehost.com/?fid=745425885120707303

enjoy!

Credits:
- LineageOS
- AOSPA
- Citrus-CAF
- DU
- PureNexus
- Zephyr-OS

IF YOU LIKE MY WORK PLEASE HIT THANKS .

-IMPORTANT- : To install this rom you must have installed TWRP-3.0.3.0 , download from here https://www.androidfilehost.com/?fid=529152257862697990
To easy install from TWRP recovery :
1- open "install" section.
2- SELECT "install img" in the bottom .
4- Chose the place of TWRP-3.0.3.0.
5- install as RECOVERY , then reboot to recovery.

XDA:DevDB Information
ROM [AOSP + LOS], ROM for the Wileyfox Storm

Contributors
PS-DEV
Source Code: https://github.com/VertexOS

ROM OS Version: 7.x Nougat
ROM Kernel: Linux 3.10.x
Based On: AOSP + LOS

Version Information
Status: Stable

Created 2017-02-11
Last Updated 2017-02-20

PS-DEV · Feb 12, 2017 at 11:23 AM

Received

PS-DEV · Feb 13, 2017 at 7:02 PM

Received !

miSAKe · Oct 22, 2010 21 5 0

Firstly, thanks loads for producing these ROMs it is much appreciated. :good:

I am unfortunately having issues getting both this and your CypherOS rom to work.

After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.

I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.

Any thoughts on what I might be missing when flashing your ROMs?

Again many thanks for the work.

Chron0s · Mar 18, 2014 92 52 0

Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.

ChuckeCheese · Feb 18, 2017 2 0 0

Cannot inatall gapps (Wrong Architecture)

Hi,

I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:

"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"

I use TWRT 3.0.3-0 (kipper)

Any ideas what I made wrong?

best regards, Chuck

Chron0s · Mar 18, 2014 92 52 0

Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.

ShiftyBloke · Feb 19, 2017 at 9:50 AM

I installed fine with the nano apps and 64 bit, no issues

PS-DEV · Feb 20, 2017 at 12:49 PM

miSAKe said:
Firstly, thanks loads for producing these ROMs it is much appreciated. :good:

I am unfortunately having issues getting both this and your CypherOS rom to work.

After full wipes of everything both roms get stuck on the "Wileyfox powered by Android" boot screen.
I get the same result sideloading via adb and from the internal memory.
I have tried TWRP 3.0.2.0 and older versions, I have also tried old and new Cyanogen recoveries.

I have successfully got the Slimrom 7.1 rom working and the LineageOS 14.1 rom which also works but with many random reboots.

Any thoughts on what I might be missing when flashing your ROMs?

Again many thanks for the work.

Check the first post

. i have been edit.

PS-DEV · Feb 20, 2017 at 12:50 PM

Chron0s said:
Any chance of grabbing your recipe for building this from source? Own personal use only. I have the VertexOS repo cloned. A copy of your roomservice and local manifest would help enormously.
This seems much more stable than Lineage at the moment. Please note you *MUST* use TWRP 3.0.2-1, the non-test version, to install Vertex and a fastboot -w also can't hurt.

show your PM.

PS-DEV · Feb 20, 2017 at 1:01 PM

Chron0s said:
Vertex appears to be built as ARMv7, which means 32 bit. Try the 32 bit pico.

NO NO

ARM64 ARMv8 .

PS-DEV · Feb 20, 2017

ChuckeCheese said:
Hi,

I installed VortexOS 1.9... but when I tried to install ARM64 7.1 pico Open gapps package then following Error occurs:

"ERROR 64: Wrong architecture to set-up Open GApps pre-bundled busybox"

I use TWRT 3.0.3-0 (kipper)

Any ideas what I made wrong?

best regards, Chuck

1- check to wipe this partitions :
- SYSTEM
- CACHE
- Dalvick-cache.
- DATA
and dont forget to factory reset .
2- first install rom then Gapps. download from here http://bit.ly/2kQf3Le

miSAKe · Oct 22, 2010 21 5 0

PS-DEV said:
Check the first post . i have been edit.

Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get

Code:

FAILED (remote: dtb not found)

I will try building it myself when I get some time.

PS-DEV · Feb 20, 2017 at 9:47 PM

miSAKe said:
Thanks again,
Unfortunately I could not get that recovery to work via TWRP 3.0.2.1 or fastboot.
I can flash it but not boot to recovery.
If booting the image directly I get

Code:

FAILED (remote: dtb not found)

I will try building it myself when I get some time.

You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?

miSAKe · Oct 22, 2010 21 5 0

PS-DEV said:
You flash via TWRP or fastboot ??
And looking for the method to install TWRP 3.0.3.0 ?
And after chose recovery , you install in "boot" or "reocvery" section ?

Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.

PS-DEV · Feb 20, 2017 at 9:55 PM

miSAKe said:
Both, from TWRP i selected recovery, this flashes but results in recovery not loading.
from fastboot the flash fails, as does booting the image via fastboot.

The phone boot to rom or not ??

miSAKe · Oct 22, 2010 21 5 0

PS-DEV said:
The phone boot to rom or not ??

Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.

Thanks for your help.

PS-DEV · Feb 20, 2017 at 10:15 PM

miSAKe said:
Yes can still boot to Slimrom 7.1 with or without working recovery.
I have reverted to TWRP 3.0.2.1 though.

Thanks for your help.

Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .

miSAKe · Oct 22, 2010 21 5 0

PS-DEV said:
Can you check your bootloader version ?
Because TWRP 3.0.3.0 Needs to kipper-13-.... bootloader
See the photo .

Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.

PS-DEV · Feb 20, 2017 at 10:27 PM

miSAKe said:
Got it kipper-12.1
I reverted to stock recently.
Solved the issue, thank you very much.

Stock firmware or what? ,, to install version 13 Bootloader , just install any nightly cm13 then back to recovery and install TWRP 3.0.3.0 ??.

VertexOS 1.9 [UNOFFICIAL][2017/2/11] [KIPPER] [AOSP+LOS]

Senior Member

Attachments

Senior Member

Senior Member

Member

Senior Member

New member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Senior Member

Member

Senior Member

Member

Senior Member

Member

Senior Member

Attachments

Member

Senior Member