[VZW_Stock Based TW Rom][5.0 Lollipop BPB1 Build Odex/Deodex] 3-4-16

[jrkruse]

Stock Verizon 5.0 BPB1 Based Lollipop Rom
Updated: 3-4-16
I added a new zip that uses an options.prop that is located in the zip. You can extract this and use notepad++ to edit it to add the features you want then copy the options.prop to the root of your sdcard or internal storage
You have the option for odexed or deodexed rom
You can choose to debloat
You can choose to add the features listed below or you can keep totaly stock
This flashes an untouched system.img so this can also be used to get back hd calling if you lost it on a rom flash

Here is an example of how to use options.prop You simply change the values in red

###Deodex Rom###
# Yes=1 Deodex Rom #
# No=0 Leave Rom Stock #
deodexed.rom=[COLOR="Red"]0[/COLOR]


###Debloat Rom###
# Yes=1 Debloat Rom #
# No=0 Leave Rom Stock #
debloat.rom=[COLOR="red"]0[/COLOR]


###Mod Rom To Add Some Features###
# Yes=1 Mod Rom #
# No=0 Leave Rom Stock #
mod.rom=[COLOR="red"]0[/COLOR]



###Remove Knox From Rom###
# Yes=1 Remove Knox #
# No=0 Leave Rom Stock #
removeknox.rom=[COLOR="red"]1[/COLOR]



###Add init.d Support To Rom###
# Yes=1 Add init.d support #
# No=0 Leave Rom Stock #
initd.rom=[COLOR="red"]1[/COLOR]

Features (Extra Mods Must Be Chosen In options.prop)
Rooted/Busybox/Init.d
Deodexed (If you Choose To)
Debloated (If YouChoose To)
Fixed Tethering
Fixed Private Mode
Added SBrowser
SD Card Fix
Device Status Official
Updated All apps
Super SU 2.67 Beta
Flashlight Toggle
Call Recording
Call Message Blocking
Call Button added to call logs

Download Rom
VZW_BPB1_ODEX_DEODEX_V9.zip New Version!
G900V_Fix Safestrap.zip(Flash In Safestrap Before You Flash The Rom Just To Make Sure Corrupted Headers Are Fixed)

Paches/Updates
Extra_toggles.zip Use To Add Flashlight Toggle

SafeStrap With PB1 Kernel
Lollipop_Safestrap_Reboot_Extended_PM_PB1.zip
Lollipop_Safestrap_Only_PB1.zip (For Manual Install)

SafeStrap Flashable Firmware Update For This Rom
This will Update Modem And NON-HLOS.bin And Kernel. No bootloaders will be updated, so device can still be downgraded.
BPB1_Firmware_No_Bootloaders.zip

SafeStrap Flashable Kernel For This Rom
G900V_PB1_Stock_KERNEL_SafeStrap-Flashable.zip


Odin Flashabel Tar Image
G900VVRU2BPB1_G900VVZW2BPB1_VZW.zip


Install And Upgrade Instructions
All Firmwares and all Instructions for Upgrading from KitKat Or Lollipop rom can be found Here

Thanks @_alexndr for his Dev Base Install Method

 

[jrkruse]

mine

 

[jrkruse]

Its uploaded!

 

[unitop4]

Any chance of getting flashfire instructions to install this?

 

[Zixx]

i got stock on the "language selection" after the install i got some FC and the screen wouldnt answer me.
did you get any issues like this ones?


ps. anyways we can get a TAR for firmware and kernel?
cause i cant even get to recovery
im stock with JOdin3.

 

[Indyultra]

I'm using your Lollipop_Safestrap_Reboot_Extended_PM_V17, will this flash the right kernel when I reboot? Or do I need to go back to a different ss?

Sent from my SM-G900V using Tapatalk

 

[jrkruse]

i got stock on the "language selection" after the install i got some FC and the screen wouldnt answer me.
did you get any issues like this ones?


ps. anyways we can get a TAR for firmware and kernel?
cause i cant even get to recovery
im stock with JOdin3.

There is a tar in the general section and on the rooting page

 

[jrkruse]

I'm using your Lollipop_Safestrap_Reboot_Extended_PM_V17, will this flash the right kernel when I reboot? Or do I need to go back to a different ss?

Sent from my SM-G900V using Tapatalk

This will flash the proper kernel and the new safestrap when you install. Once installed you will have to open the safestrap app and install it. Here is a link to new Lollipop_Safestrap_Reboot_Extended_PM_PB1

 

[syd01]

Bootloop Help

I was finally on rooted B0K3 using your method (Thank You!) and tried to flash this ROM, with debloat and it failed. Now I'm stuck in bootloop. Can't get to safestrap with Odin using NI2. What should I try next, stock restore B0K3 and reroot or use BPB1 and reroot? Where can I get the stock restore files if needed.
Never mind got it back to stock OK3 for now.
Thank You

 

[jrkruse]

I was finally on rooted B0K3 using your method (Thank You!) and tried to flash this ROM, with debloat and it failed. Now I'm stuck in bootloop. Can't get to safestrap with Odin using NI2. What should I try next, stock restore B0K3 and reroot or use BPB1 and reroot? Where can I get the stock restore files if needed.

I apologize there was a bad upload I guess I forgot to check the md5.I could have sworn I did but it didnt match so I must not of. Im reuploading now. As far as everyone that tried to install unfortunately the only way is to start over by flashing the recovery tar image in odin and rerooting. I did put all the new files on the rooting page

 

[Randol_8o8]

I apologize there was a bad upload I guess I forgot to check the md5.I could have sworn I did but it didnt match so I must not of. Im reuploading now. As far as everyone that tried to install unfortunately the only way is to start over by flashing the recovery tar image in odin and rerooting. I did put all the new files on the rooting page

I'm guessing this is most likely the same reason mine didn't work. Although I got to flash the bpb1 rom from you but when it booted it got stuck at the samsung setup screen

 

[suraz sapkota]

I'm guessing this is most likely the same reason mine didn't work. Although I got to flash the bpb1 rom from you but when it booted it got stuck at the samsung setup screen

Sent from my GT-S5360 using XDA Free mobile app

 

[jrkruse]

Ok rom is fixed

 

[Leraeniesh]

Ok rom is fixed

Thanks for the quick work!
Although now I wish I didn't just spend the last 1h30m downloading v3...

 

[Randol_8o8]

deleted

 

[Indyultra]

Debating about flashing this, what all is different then the bs free Rom? Any advantage from the bok3 kernel?

Sent from my SM-G900V using Tapatalk

 

[jrkruse]

Thanks for the quick work!
Although now I wish I didn't just spend the last 1h30m downloading v3...

Well I'm glad you didn't flash it or you would be spending next hour starting over

 

[bclay12]

So I'm trying to figure out the options. Am I suppose to extract it, edit it and put it back in the rom zip and then flash?

 

[srish2]

Ok rom is fixed

Works great. Dirty flashed over BOK3. Thanks @jrkruse!

---------- Post added at 03:32 PM ---------- Previous post was at 03:31 PM ----------

So I'm trying to figure out the options. Am I suppose to extract it, edit it and put it back in the rom zip and then flash?

I extracted, edited, and then left the options file on the SD card with the zip. After you install it, there seems to be a script that reads the options file and does what you need.

 

[jrkruse]

Any chance of getting flashfire instructions to install this?

Im trying to get this to work with flashfire right now it doesnt flash correctly with flashfire