Wanted QFIL firmware for Coolpad 3622A MetroPCS

Search This thread

Qartvela™

New member
May 19, 2019
2
0
Wanted firmware for Coolpad 3622A MetroPCS

After write firmware from T-Mobile baseband unknown and can`t fix this problem.
mediafire.com/file/j33azjozc6dp113/Coolpad_Catalyst_3622A_08092017_QFIL.zip/file

Or need solution how to fix baseband on the T-Mobile firmware.
 
Last edited:

kxrma

Member
May 12, 2022
20
3

How to root your Coolpad 3632A without TWRP!

Requirements:
USB cable
Windows or Ubuntu installed
Python installed
EDL tool
(Windows exclusive) Install Qualcomm drivers
/////////////////////////////////////////////​

STEPS​


1. Reboot your Coolpad into EDL mode by pressing vol+ and vol- and insert the usb after you done so
2. Open the EDL tool folder
3. Execute the following command in CMD or Terminal: python3 edl r boot boot.img
4. Once done, unplug the USB, tear off the back cover, disconnect the battery and reinsert it
5. Boot into Android
6. Patch the boot.img with Magisk
7. Reboot your phone into EDL mode
8. Execute the command shown: python3 edl w boot example-name.img
9. Repeat #4 and #5
10. Enjoy! :D

EDIT: No bootloader unlocking is necessary for this method to work.

Here is the firmware that has root and twrp!
Enjoy!
Coolpad Firmware
 
Last edited:
  • Like
Reactions: noidodroid

kxrma

Member
May 12, 2022
20
3
@kxrma have you checked out the 3622A also? He's asking about the 3622A model.
Sorry. I haven't done this on that phone. I got the models mixed up that's why I posted the tutorial on this thread. Fortunately, this method works for every Qualcomm device out there! I tried on many other phones and it worked!
 
Here are mine and some others that may help you with your 3622A.




 

Top Liked Posts

  • There are no posts matching your filters.
  • 1

    How to root your Coolpad 3632A without TWRP!

    Requirements:
    USB cable
    Windows or Ubuntu installed
    Python installed
    EDL tool
    (Windows exclusive) Install Qualcomm drivers
    /////////////////////////////////////////////​

    STEPS​


    1. Reboot your Coolpad into EDL mode by pressing vol+ and vol- and insert the usb after you done so
    2. Open the EDL tool folder
    3. Execute the following command in CMD or Terminal: python3 edl r boot boot.img
    4. Once done, unplug the USB, tear off the back cover, disconnect the battery and reinsert it
    5. Boot into Android
    6. Patch the boot.img with Magisk
    7. Reboot your phone into EDL mode
    8. Execute the command shown: python3 edl w boot example-name.img
    9. Repeat #4 and #5
    10. Enjoy! :D

    EDIT: No bootloader unlocking is necessary for this method to work.

    Here is the firmware that has root and twrp!
    Enjoy!
    Coolpad Firmware