WARNING - Avoiding Bricked Phones + RSD Lite Tutorial

peter971215

Member
Jun 27, 2013
29
0
0
palermo
I have not seen those messages before, I cannot figure out how you got them.

Did you install any modifications at all in the few days after your unlocked the bootloader? If you only unlocked the bootloader and rooted, there should be no problem. Since there is a bootloop problem, there must be a conflict. If you have made any more modifications it will likely be them. I would have said try RSD Lite but if that didn't do anything...p.s. do you have a nandroid backup? Did you flash a recovery? Can you get into recovery?
HI! i have a problem.. after the OTA upgrade of JB the phone don't go on network (only wi fi work)
and in ap fastboot show me this error :
E: invalid modem fuse format
Now on my razr i have installed the omar rom.. i tried to install the pil-lama rom but the radio don't work (modem)
I want to downgrade but i don't know how? how do I downgrade from JB to ics??
Thanks
 

SharpnShiny

Senior Member
May 14, 2012
911
201
0
HI! i have a problem.. after the OTA upgrade of JB the phone don't go on network (only wi fi work)
and in ap fastboot show me this error :
E: invalid modem fuse format
Now on my razr i have installed the omar rom.. i tried to install the pil-lama rom but the radio don't work (modem)
I want to downgrade but i don't know how? how do I downgrade from JB to ics??
Thanks
Hi (ciao!)

I don't know why a simple OTA update would break the radio on your phone....I have done this for years and it never happened to me. Were you on stock ROM before the OTA update?

I would consider flashing to stock ROM if you have problems with these other ROMs.

Downgrading to ICS...Personally I don't recommend it. Some users here successfully do this but there I think you need to be careful doing it. I am new to Motorola phones and have been told many times that there is a service check in the phone from Motorola that prevents normal downgrading. I know some users have experimented with 'fastboot' images of this. I would strong suggest that you ask for the best method of doing this with guys there. Many people have bricked their RAZR i through downgrading to ICS. If you would like to discuss that downgrade, the thread is here: http://forum.xda-developers.com/showthread.php?t=1936512

I just noticed that that homemade fastboot image, including for downgrading to ICS has been retired...
 

gadelat

Member
Sep 5, 2013
20
3
0
Downgrading from jelly bean to ics is not recommended and source of roms is sbf.droid-developers.org/smi/list.php, but information which rom is which version of android is nowhere to be found. I'm aware that CFC_9.8.2I-50 is probably 4.1.2, but I'm interested in information what each rom filename indicate. Can someone give some guide how motorola roms are named please?
 

Flacid Monkey

Senior Member
Dec 11, 2010
108
8
0
Can we add to make sure you're using a usb 2.0 port, not a hub connected to a 3 either.

That's what caused my week of misery.

Sent from my XT890 using XDA Premium 4 mobile app
 

funds4x

Member
Jun 16, 2014
20
0
0
hi.my battery status is always show 37 % charged. and my android is 4.1.2 build number 9.8.21-50 smi 26

i think if i change rom with other build number my problem solve. so i wan to know can i change rom to other build number?

and for change rom with RSD LITE ? and i should to unlock bootloader or no?

sorry for bad english


tnx guys
 

zlebors

Senior Member
Jan 2, 2012
380
36
28
Jakarta
I'm trying to SBF back to stock using RSD Lite 6.1.4 Multi-Flash but I'm stuck at 8/12 flash system "system_signed" process..

I've waited for 15 minutes, should I wait longer? bootloader is unlocked
 
L

lelapincretin8

Guest
hi.my battery status is always show 37 % charged. and my android is 4.1.2 build number 9.8.21-50 smi 26

i think if i change rom with other build number my problem solve. so i wan to know can i change rom to other build number?

and for change rom with RSD LITE ? and i should to unlock bootloader or no?

sorry for bad english


tnx guys
I've got the same problem, so I unlocked the bootloader then, I flashed a full stock JB ROM by RSD and it was fixed ;)
 
Last edited:

outoftown

Member
Nov 25, 2010
8
0
0
Flashed with AT&T - no network signal - I can't flash another ROM...

Hi all,

Please help!
I flashed with RSD Lite an 4.0.4 AT&T ROM (InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip) but I don't have network signal (I'm from Europe...).
After that I tried to flash it again with all 4.0.4 ROMs but I didn't succed... (using RSD Lite)
What can I do to flash with another 4.0.4 after this AT&T ROM??

Thank you!
 
L

lelapincretin8

Guest
Hi, there I did a Hard brick in my motorola xt890i what hardware pieces I need to replace thank you
Try this: http://forum.xda-developers.com/showthread.php?t=2184877

Hi all,

Please help!
I flashed with RSD Lite an 4.0.4 AT&T ROM (InlineFlashing_Edison_67.21.125_CFC_P3_APBP.xml.zip) but I don't have network signal (I'm from Europe...).
After that I tried to flash it again with all 4.0.4 ROMs but I didn't succed... (using RSD Lite)
What can I do to flash with another 4.0.4 after this AT&T ROM??

Thank you!
Are you sure there's a AT&T ROM for the RAZR I??
You maybe have the RAZR M

Envoyé de mon XT890 en utilisant Tapatalk
 

cornpollen

Member
Oct 11, 2014
16
2
0
Bricked Moto x 2014

Hi, I bricked my moto x, now its stuck in boot loop. It's not showing up on my computer either, and RSD Lite won't recognize it. Please help :(