[WARNING] Don't Hard Brick Your Atrix! Look Here.

[samurai9x]

I will be working on a solution on this issue this month. We are getting closer:

Selected Custom Target: [TEGRA2, 2.60V, TAP0]

Halting target...OK
STATUS: Target was already halted.

R0 = 0x00061A08 R6 = 0xAB210468 R12 = 0x000001E0
R1 = 0x00061C97 R7 = 0x000680E8 R13 = 0x4031A980
R2 = 0x000000FF R8 = 0x00061848 R14 = 0xAB1DC8C1
R3 = 0x00061CE1 R9 = 0x00000001 R15 = 0xAB1D980E
R4 = 0x00000197 R10 = 0x000002C9 CPSR = 0x80000030
R5 = 0x00000000 R11 = 0x00000000

JTAG will be the best option... Unless someone can decrypt the RSA key for NVFlash!

How is it going? when we will celebrate the victory?

 

[oguzmete]

Do not have choice but to friends

 

[Phalanx7621]

Hello all. I'm considering using my insurance policy that I pay for every month, but I'm curious---if I lost mine instead of sending one in to be repaired, do they send you a refurbished one? Or a brand new Atrix? Also, just out of curiosity, I wonder if they deactivate your old SIM card or not. Just wondering, in case I lost my phone and then found it. I live at the beach, so I've almost lost it be4. Good luck all, happy flashing.

 

[Savant]

Hello all. I'm considering using my insurance policy that I pay for every month, but I'm curious---if I lost mine instead of sending one in to be repaired, do they send you a refurbished one? Or a brand new Atrix? Also, just out of curiosity, I wonder if they deactivate your old SIM card or not. Just wondering, in case I lost my phone and then found it. I live at the beach, so I've almost lost it be4. Good luck all, happy flashing.

Refurbished one and they do send you a new sim card. They can't send a phone without a sim because they assume you don't have it.

Sent from my MB860 using xda premium

 

[hiswayout]

So I definitely hard bricked. Then used fastboot to unbrick and install cyanogenmod... I didn't feel like reading all 35 pages of this forum to see if this was a Known fix but if you are stuck, go find a custom CWM and unlock through fastboot and then flash the CWM through it as well. Hope this helped.

 

[rabydanimal]

So I definitely hard bricked. Then used fastboot to unbrick and install cyanogenmod... I didn't feel like reading all 35 pages of this forum to see if this was a Known fix but if you are stuck, go find a custom CWM and unlock through fastboot and then flash the CWM through it as well. Hope this helped.

You definitely didn't hard brick if you were able to boot into fastboot.

 

[hiswayout]

I got that error message. After flashing through sbf. Soft brick I guess. Still

Sent from my MB860 using xda premium

 

[lisaamybeth]

Alien#4 To Stock help/advice needed please !

So far i have rooted my atrix, unlocked the B/L, installed CM7 beta, then tried Alien#4 with faux's unified kernal (all because know these devs produce an upto date O/S but I really would like the works ...

All amazing stuff but I do miss some features that came with stock GB T-Mobile android 2.2 specifically the ability to use my HDTV to view gallery photos & videos and the FP reader..

I did do a Titanium Backup in CWM prior to my first CM7 install.Will this reset to T-mobile GB stock ? Would it work restoring this ?

If I factory reset/wipe in CWM recovery. Does this reset to T-mobile GB stock ?

Can someone advise on a URL that will get me going in the right direction if the above would not work. After reading so much about bricks when going BACK from 4.5.91 I am paranoid bout doing anything else !!
Thank you
John

 

[drkarl]

HELP PLEASE(SVF message: 105:1:2 failed to boot 0x1000)

please help ....
SVF was flash but the Atrix 4g 1.2.6 AT & T was shut down at the end of precessing ....
Now on power and vol down SVF message: 105:1:2 0x1000 failed to boot on and off in seconds Starting no fastboot protocol support either vol up RSD protocol support

I'm desperate ... please ... ayudenme
I think now if it is a brick .....

 

[[email protected]]

I'm in the same boat as you are. Same message. I will try to contact Moto for a replacement......

 

[godwin1981]

Hello.my phone is bricked today when i want to relock bootload because the bluetooth and wifi doesn't work and i want to.replace it with moto.i bought it from ebay.can anybody tell me how can i replace it from moto and what's the phone numbet?thank you for your help

 

[Phalanx7621]

Hello.my phone is bricked today when i want to relock bootload because the bluetooth and wifi doesn't work and i want to.replace it with moto.i bought it from ebay.can anybody tell me how can i replace it from moto and what's the phone numbet?thank you for your help

So I'm confused---you hard bricked your phone, or soft bricked your phone? Will it not boot up? Unless you tried to .sbf down after doing an OTA to gingerbread, most likely you can recover from whatever problem you're talking about. IF you can't, the phone number is: http://www.motorola.com/Support/US-EN/Support-Homepage/Service-My-Product/Service+My+Accessory

 

[rredlin]

i am getting a reman replacement atrix from att this week, i was told it will have 2.3.4 on it, can i still unlock the BL and flash my fav custom rom?

 

[ccrowe3]

So I definitely hard bricked. Then used fastboot to unbrick and install cyanogenmod... I didn't feel like reading all 35 pages of this forum to see if this was a Known fix but if you are stuck, go find a custom CWM and unlock through fastboot and then flash the CWM through it as well. Hope this helped.

The title of this thread is misleading. If I have gathered the information correctly, this is a failure to boot with no fastboot or other options when you have tried to downgrade using sbf to an older version of Android after you have the official AT&T Motorola Gingerbread installed either through a factory preinstall, sbf or OTA..

 

[godwin1981]

So I'm confused---you hard bricked your phone, or soft bricked your phone? Will it not boot up? Unless you tried to .sbf down after doing an OTA to gingerbread, most likely you can recover from whatever problem you're talking about. IF you can't, the phone number is: http://www.motorola.com/Support/US-EN/Support-Homepage/Service-My-Product/Service+My+Accessory

Thank you for your help.i think i have hard brick my phone because i tried to downgrad to 1.8.3 through SBF to avoid "unlock bootload" word when turning on the phone.
I don't upgrad to 2.3.4 with OTA just using pudding and flash with CWM.But now the phone pause at start screen.no words showing just "Moto"

 

[godwin1981]

Thank you for your help.i think i have hard brick my phone because i tried to downgrad to 1.8.3 through SBF to avoid "unlock bootload" word when turning on the phone.
I don't upgrad to 2.3.4 with OTA just using pudding and flash with CWM.But now the phone pause at start screen.no words showing just "Moto"

i found it can start again now but pause at "rethink possible".tks

 

[alil]

http://forum.xda-developers.com/showthread.php?t=1350390
anyone can help answering this?
thanks

 

[weslxa]

Still no fix for a hard brick? I struggled with mine for a few weeks and gave up I'm hoping someone posts a tutorial on how to do a recovery through nvflash soon...

 

[raullugo]

Still no fix for a hard brick? I struggled with mine for a few weeks and gave up I'm hoping someone posts a tutorial on how to do a recovery through nvflash soon...

I don't know man, I've been waiting for a really long time for an answer. I don't know if anyone is interested on solving this problem.

 

[McHeiSty]

Edit: Bricks are bricks :[