Whitestone compatible case list

[Wind_Driven]

It takes a little getting used to,but after a week or so its a non issue.

 

[Kawaisa]

Dome started bubbling on the corners for using the uag monarch. Yeah it won't work...

Should I shave the corners or switch cases...

 

[masri1987]

how about spigen cases, does it work?

 

[borijess]

Is there any case that has the look and feel of a UAG case. With the slim and lightweight build of the UAG PLASMA. I have the plyo but it doesn't offer the same protection as the PLASMA. I do my want the Monarch to bulky.

 

[Kawaisa]

Got rid of the Monarch. Sad. Need something to fit this Whitestone Dome.

 

[elbarto7]

Got rid of the Monarch. Sad. Need something to fit this Whitestone Dome.

really? Been using the monarch with witestone for a month and no problem at all.

 

[Ricey]

Yea that's strange. Even whitestone listed it as a compatible case. It might be that it needs a near perfect install (all side gaps). If it's off a bit then maybe the lip will lift up a side.

 

[Kawaisa]

The sides were fine. The corners of the Whitestone touched the case on all four corners. Top left and bottom right started bubbling. I was able to get rid of most of the bubbles but there's a permanent bubble on the bottom corner. Shame.

I remember someone posting a pic of it happening with theirs as well. Not sure what thread it was.

 

[borijess]

The sides were fine. The corners of the Whitestone touched the case on all four corners. Top left and bottom right started bubbling. I was able to get rid of most of the bubbles but there's a permanent bubble on the bottom corner. Shame.

I remember someone posting a pic of it happening with theirs as well. Not sure what thread it was.

What u do is take a Dremel and sand some of the corners. I did it on the plyo and it looks and fits great.

 

[elbarto7]

What u do is take a Dremel and sand some of the corners. I did it on the plyo and it looks and fits great.

I will do that with my plyo. Thanks

 

[kudosmog]

Can anyone confirm if the Zizo bolt is compatible with the whitestone dome glass?

I have a zizo bolt, and the protector works without issue. I didn't get it perfect, but it's tight so you don't have much room for mis-alignment.

 

[Monkey Chops]

I can conform the UAG Monarch works. I have a feeling that if you drop your phone, it will push the protector off though. It's a very close fit.

 

[borijess]

I can conform the UAG Monarch works. I have a feeling that if you drop your phone, it will push the protector off though. It's a very close fit.

Sand down edges of the UAG case with a Dremel to give it some breathing room.

 

[Kawaisa]

Well the whitestone is bubbling a little on the corner anyways. I'm just going to buy another monarch. I miss it. All other cases feel cheap and inadequate after using the monarch. If it keeps bubbling then so be it. I'll use another screen protector if I have to. This is my 7th whitestone and it'll be my last.

 

[borijess]

So i got my Whitestone Dome to fit with my UAG plasma case. My favorite UAG case for protection and looks. The only thing u need to do is sand down the corners with a Dremel. To around 90 degrees each corner and the Whitestone Dome will fit perfectly. Check out the pics.

 

[Dark4rce-2]

Any thoughts on Speck? GravX hasn't tested any yet. If not, then I'm going with the Symmetry. Just like how it felt on my Note 5. Currently using Supcase Unicorn Beetle. I like it but it feels a bit thin.

 

[JGuinan007]

Unicorn Beetle Pro/White Stone Dome/Decalrus Protective Vinyl Skin

This is my setup. I put a vinyl skin on the back and camera, a Unicorn Beetle Pro Case (popped out screen protector that came with it), and a White stone Dome glass screen protector. Looks good and I'm happy with the protection. Heres links if anyone wants to do the same
https://smile.amazon.com/gp/product/B074W2MC7L/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B075D1PR6Y/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B07578J9PL/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

 

[Compusmurf]

Shave the bottom 2 corners of the alcantara case and it works great. Make the profile match the top 2.

Sent from my SM-N950U using Tapatalk

 

[Ricey]

This is my setup. I put a vinyl skin on the back and camera, a Unicorn Beetle Pro Case (popped out screen protector that came with it), and a White stone Dome glass screen protector. Looks good and I'm happy with the protection. Heres links if anyone wants to do the same
https://smile.amazon.com/gp/product/B074W2MC7L/ref=oh_aui_detailpage_o02_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B075D1PR6Y/ref=oh_aui_detailpage_o06_s00?ie=UTF8&psc=1
https://smile.amazon.com/gp/product/B07578J9PL/ref=oh_aui_detailpage_o01_s00?ie=UTF8&psc=1

Does the front lid cover thing touch and affect the whitestone?

 

[JGuinan007]

Does the front lid cover thing touch and affect the whitestone?

It does on the top and bottom not on the sides there is like a hair line space where glass stops and "lid" starts but this does not affect the screen protector at all. Had this on for about 2 weeks now and still no issues.