Whitestone Dome Glass Screen Protector Review and Install

TheGame7

Senior Member
Jun 18, 2010
78
24
0
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ

Warning: As seen in the video at the 10:26 mark it is very important as a beginner that you make sure the surface is level (Use a physical bubble level and have business cards nearby) and leave the alignment bars (Plastic L Shapes) on during the curing process with the UV light, otherwise the screen protector may slide off of the phone. I was doing this for a friend at his house with the table he had, therefor as you saw at the 10:26 mark it began to slide away. Me doing so many installations I was use to this sort of thing happening, and quickly corrected the issue. I find the alignment bars to get in my way when moving the screen to the most case friendly position. However when I started out I did use these alignment bars, think of them as training wheels. Just be sure when you manually align the screen protector that the alignment bars are not lifting out of their 3 bumps and that they are not lifting your screen. Make sure your surface is level otherwise the adhesive could pour over the edges of the phone. Business cards help immensely, along with not working on installation in the middle of a 2 piece table.

Review
Before I continue please keep the "It's too expensive" posts out of here. Other glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.

Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going

Confirmed List
Commuter
Symmetry
UAG
https://youtu.be/sScL3ZyGTgI

Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.

Q: Can I use the phone after installation?
A: You will need to wait 1 hour.

Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone

Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.

Here's a review of the Mophie case with the Whitestone:
 
Last edited:

yoyoche01

Member
Oct 31, 2015
8
5
0
Great post and vid. I am installing this today and this helps alot. Crossing fingers.

Sent from my SM-G950U1 using Tapatalk
Sorry can't edit previous post.

Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]

Sent from my SM-G950U1 using Tapatalk
 
Jul 5, 2017
36
70
0
You're struggles are over! I have been looking for the best screen protector for edge devices and I had to tell everyone. No more touch sensitivity issues, no pressing harder, no more bouncing screen, and no more popping off screen protectors. The Whitestone Dome Glass Screen protector is the best! I made an install tutorial because the worst part is installing it. It's complicated, but watch my video for tips and tricks and you will be an expert in no time:
https://www.youtube.com/watch?v=RaNK59tMsBQ

Review
Before I continue please keep the "It's too expensive" posts out of here. Other screen glass screen protectors, Otterbox, Zagg, ect are the same price. You are paying $45 to protect a $800+ phone. Insurance is a $200 deductible. So it's not expensive compared to paying a deductible. You also get an added bonus... The UV light can be used by women or given to women as a gift to dry their nails. Oh you're a guy and have no use for it? Ever had a car windshield chip?
You can get a repair kit and use the UV light to dry the resin, ever paint? UV light to dry the paint, UV light to dry glue, UV light to tan your wedding ring finger... Just kidding don't do that last one. Anyway now that I got that out of the way I came from a S7 Edge and my struggles to find the perfect screen protector were very difficult. I am extremely OCD with my phones and worried so much about cracking the screen. I used the Otterbox Defender after trying screen protector, after screen protector, and after getting frustrated with the touch screen sensitivity issues with the Otterbox Defender due to the built in plastic screen protector and dealing with dirt and easy scratches, I went back to my Note 4. Then the S8 came out and I again attempted to go to an edge phone, and after purchasing the Whitestone screen protector I will say it's made the phone feel just like I never had a screen protector at all. I no longer have a screen protector that for some silly reason only had glue around the edges which made the protector springy/bouncy on every touch. Not to mention that most times the protector would pop off due to lack of glue. This isn't a problem with the Whitestone due to the fully adhesive protector. There's no touch screen sensitivity issues and it feels like I am touching a naked screen. Plus my edge features actually work.

Q&A
Q: What cases work with it?
A: Otterbox Symmetry and Commuter, defenders do not work. I haven't had any other case tests, I am about to purchase the Mophie battery case and test it out. If you have any cases that work well, please let me know so I can get a compatibility list going

Q: Can I put a case on after installation?
A: No you need to wait 24 hours for curing.

Q: Can I use the phone after installation?
A: You will need to wait 1 hour.

Q: How long should I set aside time for install?
A: If you have never done it be prepared for around 1 hour plus the 1 hour wait after before you can use your phone

Q: Do you know if there is a warranty on the product?
A: I'm not sure, I couldn't find anywhere on there for warranty info. I know I received a cracked one and ended up having to purchase another one, file a claim on Amazon, and send the cracked one back.
Hello TheGame7, this is Whitestone.

Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.

If you have any questions or feedback that you would like to give us please do so!
Thank you

P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
 
Last edited by a moderator:

TheGame7

Senior Member
Jun 18, 2010
78
24
0
I can confirm that it works great with uag cases. Also I found a video where they tested 50 cases with Whitestone dome:
https://youtu.be/sScL3ZyGTgI
Thank you for the info! I am one guy so testing that many cases would have proved to be difficult for me. I have added your confirmed case along with a link to the video in the original post.


Great post and vid. I am installing this today and this helps alot. Crossing fingers.

Sent from my SM-G950U1 using Tapatalk
I'm sure all will go smoothly, don't be nervous, I was at first, but there absolutely is no reason to.


Sorry can't edit previous post.

Install done.....successful! The biggest part is applying the epoxy, it is very thin, almost like water. Slowly loosening the cap on the epoxy tube and leveling the puddle is crucial to success. So do it slowly and use cards to level the puddle before releasing the remainder of the ep oxy. Then make sure it flows to the entire screen and you are golden. This video with tips is golden.
Thanks[emoji2]

Sent from my SM-G950U1 using Tapatalk
Happy to assist. My failures are your success :)


Hello TheGame7, this is Whitestone.

Thank you so much for taking interest in our product and making such detailed instructional video for installing the Dome glass! Your video was exceptional, the tips and tricks you covered were very clear and precise. We were pleasantly surprised. As you mentioned in the video, we have made modifications to our installing procedure and the tools as well since the initial launch. The only thing we would like to point out is that you should NOT remove the align bars (the plastic things) before curing the adhesive. Experienced people such as yourself will have no problem manually aligning the glass, but some people may panic or completely butcher the installation if they see the glass slipping away. Also, if the glass moves towards the speaker, the adhesive may flow into the speaker or buttons (if applicable). It will not damage or break the device, but it could result in discomfort while using the device.

If you have any questions or feedback that you would like to give us please do so!

Thank you

P.S. We apologize for not being able to directly link our Facebook page. We have just started using xda to communicate with the public and we cannot post external links at this moment.
Wow I can say I am pleasantly surprised. I didn't think that I would catch the attention of Whitestone themselves. Absolutely brilliant idea with the screen protector I must say! I really appreciate the positive feedback and will make note of your feedback in the topic and video! I do typically remove the alignment bars pre-cure as they get in my way for aligning below the camera. They tend to lift up and sometimes lift the screen protector up while I adjust towards the edge of the camera. My video is the perfect example of making sure you have a level surface and I will make a note in the video and in this topic that newer purchasers of Whitestone will want to have a physical bubble level nearby to complete the task or potentially have level issues as shown in the video or to be sure and keep the alignment bars installed and make sure to keep an eye on the edges for any possible lifting.
 
Last edited by a moderator:

reyals1

Senior Member
Apr 10, 2011
110
20
18
@Whitestone Dome Glass

Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
 
Jul 5, 2017
36
70
0
@Whitestone Dome Glass

Will there be replacement screen sets be available in the future? So glass, loca glue, alcohol pads and microfiber cloth? Since the curing light and rigg are re-useable it could means easy replacement at much lower cost.
Hello reyals1, its Whitestone.

We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!

I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
 

raimondomartire

Senior Member
Nov 9, 2005
3,579
4,893
263
Salerno
Hello reyals1, its Whitestone.

We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!

I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Please can you give a link to buy?. I bought in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some scratch that I can't explain but I don't want buy full package
 
Last edited:

reyals1

Senior Member
Apr 10, 2011
110
20
18
Please can you give a link to buy?. I buy in europe from mobilefun.co.uk but I don't find any replacement kit. After 2 week screen show some damage but I don't want buy full package
Since the replacement kit is only 5$ cheaper than a new kit (on amazon) it might be easier to buy a complete kit and sell the uv light to a woman who wants to use it for her nails.

The replacement kit should not cost more than about 10$, imho
 
Last edited:

faybarn

Senior Member
Oct 19, 2010
169
36
48
Hello reyals1, its Whitestone.

We currently do sell replacement kits on Amazon and are working on providing it on all the different online retailers we are working with!

I hope this answered your question, if there are any further questions or feedback please let us know.
Thank you.
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
 
Jul 5, 2017
36
70
0
Do you have any plans to sell these on amazon UK at any point in the future? I really want to try one but would rather use Amazon to a third party site to ensure I get a genuine kit.
Hello faybarn, its Whitestone.

We currently do not sell on Amazon UK, we are still working on expanding our market! We may be able to sell on Amazon UK in the future. If you are still interested in buying our product, you can purchase it from Mobilefun.

If there are any further questions or feedback please let us know!
Thank you! :)
 

TheGame7

Senior Member
Jun 18, 2010
78
24
0
To anyone wanting to know the Mophie S8 and S8+ cases work great with this screen protector! I'll make a review video soon for it. The top of the case separates and you slide your phone in (no more plopping it in and out of a case hoping it doesn't touch the screen protector) then you slide the top down and it fits perfect. It's a 3300 MAH battery pack and from 25% with the phone on, it got me to 90% while I was using the phone. It also feels like it matches with the curvature of the phone. I recommend trying it out in store, as it is a bit heavier, but no where near as heavy as a ZeroLemon 10,000 MAH battery I had for the Note 4. Attached are some screenshots with the case and screen protector. Oh the speaker redirect to front is really nice too! :)
 

Attachments

Last edited:
  • Like
Reactions: Opensystem

sam5154

Senior Member
Feb 16, 2011
499
129
0
Hi
I've bought one, but I mixed two align bars and now I don't know which align bar is for top and which is for the bottom. They are a little different. as you can see in pictures one has a small sticker attached to it at 45 degree angle while in the other one it is attached straight.
can anyone help to place these correctly?
 

Attachments

Last edited:

andrewilley

Senior Member
Mar 17, 2006
961
180
73
Birmingham
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?

Andre
 

MasterThiefGarrett

Senior Member
Sep 4, 2010
551
100
0
If fitting this goes horribly wrong, or if the protector gets damaged in an accident later, how easy is it to remove it again after the glue has cured and will any residue be left on the screen?

Andre
Look at this video, this will answer your questions, it's very clear :)
It does seem to stick very well to your phone so that's good, I hate the usual (crappy) tempered glass protectors that only have glue on the sides... 1 "wrong" case and *pop* there it goes :/