Question will there be a android 13 update for this device?

Search This thread

TWRP FOR SAMSUNG GALAXY F62/M62 (EXYNOS 9825) (*M62 UNTESTED)



Team Win Recovery Project 3.x, or Twrp3 for short, is a custom recovery built with ease of use and customisation in mind. It's a full touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

TWRP built for the Samsung Galaxy F62. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. SAMSUNG ODIN is used to flash this recovery.

Downloads:

Modified boot img
AVB Disabled vbmeta
TWRP Recovery
Multidisabler F62 (removes encription)


Installation (Odin Windows)​

Prerequisites: Samsung USB drivers, ODIN

If you already have the bootloader unlocked you can skip to step 6.
* Please be aware all your data will be erased including internal storage and phone will reboot!!
* If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!

  1. Make sure OEM Unlock is ON in developer settings;
  2. Turn off the phone;
  3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
  4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
  5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
  6. Make sure OEM Unlock is ON in developer settings;
  7. Turn off the phone;
  8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
  9. Download TWRP RECOVERY from above.
  10. Download AVB Disabled VBmeta from above,
  11. Flash the modified boot.tar in AP Section of odin.
  12. after flashing boot now restart the download mode by using 8 method.
  13. now put the modified vbmeta.tar in USER section of odin and flash it. - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
  14. After following the above step, boot to stock recovery of android by Use vol up + power + usb cable plugged to a pc and there perform a factory reset. THIS WILL EARSE YOUR DATA.
  15. After performing factory reset, boot to download mode by Use vol up + vol down + usb cable plugged to a pc and now put the downloaded TWRP RECOVERY.TAR in AP section of odin and flash.
THAT'S IT YOU WILL HAVE A TWRP RECOVERY.






******You can always revert to stock by flashing full frimwere with odin.

  1. IMPORTANT STEP TO MAKE TWRP MOUNT PARTITIONS
  2. In TWRP home screen press wipe - format data - yes
    Download multidisabler.zip from above and flash. It will disable security and encryption.

Credits : EncriptedHibiscus In guidance with Sushrut1101

Thanks for your effort. Waiting for the stable recovery and development of custom kernels and roms 😁
 
Last edited:
  • Like
Reactions: rc chanu

Top Liked Posts

  • There are no posts matching your filters.
  • 2
    we got android 12 update....
    is this the final update or will there be a android 13 update too?
    2
    Thanks for that! Is data backup working on this release?
    No. still in beta
    1

    TWRP FOR SAMSUNG GALAXY F62/M62 (EXYNOS 9825) (*M62 UNTESTED)



    Team Win Recovery Project 3.x, or Twrp3 for short, is a custom recovery built with ease of use and customisation in mind. It's a full touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.

    TWRP built for the Samsung Galaxy F62. It should work fine, but using it is a try at your own risk procedure. Your bootloader must be unlocked to use this recovery. SAMSUNG ODIN is used to flash this recovery.

    Downloads:

    Modified boot img
    AVB Disabled vbmeta
    TWRP Recovery
    Multidisabler F62 (removes encription)


    Installation (Odin Windows)​

    Prerequisites: Samsung USB drivers, ODIN

    If you already have the bootloader unlocked you can skip to step 6.
    * Please be aware all your data will be erased including internal storage and phone will reboot!!
    * If by any chance you see RMM state=Prenormal or KG state=Prenormal, redo from step 5!

    1. Make sure OEM Unlock is ON in developer settings;
    2. Turn off the phone;
    3. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode;
    4. Long press vol up then confirm you want to unlock bootloader (this is needed one time only);
    5. Let the phone boot normally, pass the setup and connect to internet (wireless or mobile data) in order to unlock RMM;
    6. Make sure OEM Unlock is ON in developer settings;
    7. Turn off the phone;
    8. Use vol up + vol down + usb cable plugged to a pc to start the phone in download mode, short press vol up to confirm you want to go to download mode;
    9. Download TWRP RECOVERY from above.
    10. Download AVB Disabled VBmeta from above,
    11. Flash the modified boot.tar in AP Section of odin.
    12. after flashing boot now restart the download mode by using 8 method.
    13. now put the modified vbmeta.tar in USER section of odin and flash it. - once you press start grab the phone and press vol up + power to force it boot straight in TWRP after flashing
    14. After following the above step, boot to stock recovery of android by Use vol up + power + usb cable plugged to a pc and there perform a factory reset. THIS WILL EARSE YOUR DATA.
    15. After performing factory reset, boot to download mode by Use vol up + vol down + usb cable plugged to a pc and now put the downloaded TWRP RECOVERY.TAR in AP section of odin and flash.
    THAT'S IT YOU WILL HAVE A TWRP RECOVERY.






    ******You can always revert to stock by flashing full frimwere with odin.

    1. IMPORTANT STEP TO MAKE TWRP MOUNT PARTITIONS
    2. In TWRP home screen press wipe - format data - yes
      Download multidisabler.zip from above and flash. It will disable security and encryption.

    Credits : EncriptedHibiscus In guidance with Sushrut1101

    Thanks for your effort. Waiting for the stable recovery and development of custom kernels and roms 😁
    1
    Thanks for that! Is data backup working on this release?
    please check the latest RECOVERY POST