windows mobile 10 Redstonebuild 14267& higher for old lumias in insider fast Ring

Search This thread

classyamin

Member
Jan 13, 2017
7
0
Tehran
first of all
thanks for everything
i updated my lumia 920 to the latest version and it is working fine.
just one problem
bluetooth is not working, it says not connected, but when you check it in setting>device>bluetooth it is OFF and it can't be turned on!
another thing that i think my phone is not fully unlocked, because interop is not fully working, when i want to turn on options in INTEROP UNLOCK, they cannot be turned on and they always turned off; such as INTEROP/CAP UNLOCK, FULL FILE SYSTEM ACCESS, RESTORE NDTKSVC AND ...
what should i do?
will somebody help me?
 

tofuschnitte

Senior Member
Nov 29, 2012
204
40
bluetooth is not working, it says not connected, but when you check it in setting>device>bluetooth it is OFF and it can't be turned on!
use the actioncenter to toggle it on and off, sometimes needs a bit time but works. the menu doesnt work correctly since a few months on the 920

in terms of interop:
restore ndtksvc, reboot, enable interop unlock, reboot. done
 
  • Like
Reactions: classyamin

classyamin

Member
Jan 13, 2017
7
0
Tehran
use the actioncenter to toggle it on and off, sometimes needs a bit time but works. the menu doesnt work correctly since a few months on the 920

in terms of interop:
restore ndtksvc, reboot, enable interop unlock, reboot. done

please kindly check the attachments for more info.
bluetooth option cannot be changed and it is not activated.
also interop options cannot be changed in no way.
there are ALWAYS OFF!
 

Attachments

  • photo_2017-02-15_11-55-32.jpg
    photo_2017-02-15_11-55-32.jpg
    65.9 KB · Views: 234
  • photo_2017-02-15_11-55-47.jpg
    photo_2017-02-15_11-55-47.jpg
    25.8 KB · Views: 227
  • photo_2017-02-15_11-55-56.jpg
    photo_2017-02-15_11-55-56.jpg
    81.6 KB · Views: 221
  • photo_2017-02-15_11-56-13.jpg
    photo_2017-02-15_11-56-13.jpg
    108.3 KB · Views: 209
  • photo_2017-02-15_11-56-09.jpg
    photo_2017-02-15_11-56-09.jpg
    128.6 KB · Views: 213

tofuschnitte

Senior Member
Nov 29, 2012
204
40
bt is bugged (not only on the 920, even on 950 it bugged around a few times in the past). deactivate it via the actioncenter, wait 30 secs or so, activate it again. should get activated fine, but only the switch in the ac works, not in the bt menu to deactivate and reactivate it again. if that doenst work -> try a softreset, if that doenst work -> try a hard reset. if that doenst -> try a recovery,flash the engineering bootlaoder to spoof the device (if you havent done that yet), update to the latest version again, do a hardreset and config your device as usual

same goes for the interop stuff
 
  • Like
Reactions: classyamin

classyamin

Member
Jan 13, 2017
7
0
Tehran
bt is bugged (not only on the 920, even on 950 it bugged around a few times in the past). deactivate it via the actioncenter, wait 30 secs or so, activate it again. should get activated fine, but only the switch in the ac works, not in the bt menu to deactivate and reactivate it again. if that doenst work -> try a softreset, if that doenst work -> try a hard reset. if that doenst -> try a recovery,flash the engineering bootlaoder to spoof the device (if you havent done that yet), update to the latest version again, do a hardreset and config your device as usual

same goes for the interop stuff

thanks buddy.
Bluetooth not working in my phone neither in the setting, nor in the action center!
i already did a soft reset, but not a hard reset!
maybe someday, because it really take a lot of work make everything back together.
but i didn't understand flashing the bootloader, how can i do that?
firstly I think i should do the hard reset, if not corrected, i should go to flashing the bootloader.
 

tofuschnitte

Senior Member
Nov 29, 2012
204
40
first do a hardreset and see if it works afterwards

if not you need to do a recovery via the windows device recovery tool. that flashes 8.1 again, search for latest 8.1 updates on the devices again, it will find 1 or 2. the the only option now to go on a 920 to 10 again while its on 8.1 is flashing the engineering bootloader (see wpinternals.com for the tool and tuts about it) to enter mass storage mode to load the registry of the phone on your desktop to modify the device id to get the update (got explained multiple times here too how it works). after spoofing just reenter the insider programm in the release preview ring, it will bump you to 10586.107 and then to the latest rs1 build. after that do a hardreset and (if nothing has gone wrong in any step prior) you have the cleanest possible install
 
  • Like
Reactions: classyamin

chili9876

New member
Feb 15, 2017
1
0
Um. Copy the files provided by titi66200 to Phone:\SharedData\OEM\Public and import the values from here and here into your phones registry. As for importing the reg keys i don't know if there is another way instead of booting your phone in mass storage mode (which requires an unlocked bootloader with mass storage mode enabled), load the registry hives SYSTEM and SOFTWARE into regedit and import the entries as .reg-File.

I used files and registry entries from an older backup of my phone with working glance. I suggest you do the same.

Just wanted t osay this worked as charm for me as well - got glance app and feature itself working on lumia 925 anniversary update.
Done everything as posted above + replaced double slash // with single / in all the paths.
 

classyamin

Member
Jan 13, 2017
7
0
Tehran
first do a hardreset and see if it works afterwards

if not you need to do a recovery via the windows device recovery tool. that flashes 8.1 again, search for latest 8.1 updates on the devices again, it will find 1 or 2. the the only option now to go on a 920 to 10 again while its on 8.1 is flashing the engineering bootloader (see wpinternals.com for the tool and tuts about it) to enter mass storage mode to load the registry of the phone on your desktop to modify the device id to get the update (got explained multiple times here too how it works). after spoofing just reenter the insider programm in the release preview ring, it will bump you to 10586.107 and then to the latest rs1 build. after that do a hardreset and (if nothing has gone wrong in any step prior) you have the cleanest possible install

I wanted just Say that my issue with bluetooth was solved after doing a hard reset.
thanks.
my phone is working very smoothly - Lumia 920
 

q10031990

New member
Feb 26, 2017
2
0
Hi all,

Redstone Insider Builds Supported Devices :-

Alcatel OneTouch Fierce XL || || Lumia 535 || || Lumia 640 || || Lumia 930 ||

BLU Win HD W510U || || Lumia 540 || || Lumia 640 XL || || Lumia 950 ||

BLU Win HD LTE X150Q || || Lumia 550 || || Lumia 650 || || Lumia 950 XL ||

Lumia 430 || || Lumia 635 (1GB) || || Lumia 730 || || Lumia 1520 ||

Lumia 435 || || Lumia 636 (1GB) || || Lumia 735 || || MCJ Madosma Q501 ||

Lumia 532 || || Lumia 638 (1GB) || || Lumia 830 || || Xiaomi Mi4 ||

=================================================================================================================================================
Disclaimer :modifying registry and getting update may cause serious damage to your phone ,
The XDA Developers community, Microsoft and me are not responsible for any damage to your device,think twice and decide to go or not


its only for most enthusiastic people to who risk their devices to try new builds
====================================================================================

For Easy & simple upgrade install DHT Upgrade Advisor & follow the post ==>here
DHT Upgrade Advisor
app
dependencies
=====================================================================
Follow the Below Steps :-
======================================================================
After every Reset/Flash, first turnoff automatic update setting in store ,don't update Extras+info.
if you got 0x80091007 error after downloading update ,Hard-reset is required,you need to download again with strong WiFi connection
================================
Interop-Unlock your Device
=================================
1) Download WP sdk tools 8.0 lite :source zippyshare and click on "install.bat " click "Yes" for every prompt
Goto ("C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment") and open "Xap Deployment.exe"

2 ) Deploy @vcfan Lumia registry editor vcReg_1.5 or vcREG_1_6_W10M

[ Go to vcreg-->(. . .)-->templates-->check mark , live interop and restore Ndtksvc and click on apply
=========================
Editing Registry Values
=========================
try to deploy custom pfd 6 with same "xap Deployment.exe",if its not successful then

3 ) Download WP sdk tools 8.1 lite source Zippyshare and extract it,click on "InstallWP81SDKToolsLite.bat" accept all prompts .

goto "C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.1\Tools\AppDeploy" and open " AppDeploy.exe" .

download customPFD (@Pasquiindustry) and deploy it.

move to HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo then

take the screenshots of your device original values and move to SDcard,you can restore same values anytime

a)change " PhoneManufacturer " = MicrosoftMDG
b)change " PhoneManufacturerModelName " = RM-1085_11302 (for Single SIM devices) // *** For all dual sim devices try = RM-1116_11258 ***


4) change PhoneModelName = Lumia 950 XL (single sim) or Lumia 950 XL Dual SIM (for dual)

5)change PhoneHardwareVariant = RM-1085

6) install windows insider from store

check for the update ,if not try below 930 values too

Lumia 930 Registry values :-

PhoneHardwareVariant : RM-1045
PhoneManufacturer : NOKIA
PhoneManufacturerModelName : RM-1045_1003
PhoneModelName : Lumia 930

====================================================================================================================================================
for those who are not getting update change below values also

first you need to select similar Hardware device in supported list ,but select single to single,dual to dual sim devices

go to http://www.lumiafirmware.com and select your similar device and your device country variant .

change above 4 values according to selected device
and
change below values at
HKLM/SOFTWARE/OEM/Nokia/Variant/BSPRelease
HKLM/SOFTWARE/OEM/Nokia/Variant/ConfigurationID
check below images for values,enter the values of your selected device at http://www.lumiafirmware.com

and check for updates,if not try to change

HKLM/SOFTWARE/OEM/Nokia/Variant/labelID ("CorebuildID") of your selected device,

i don't have other devices except 1520 for 1520 =9032.18(FW version) ,you need to search in web for your selected device's extras+info screenshot's ,some of them show CorebuildID in it

this below image for dual sim,selected device is 730,for single sim try 830 of your CV at http://www.lumiafirmware.com

attachment.php



Radio FM Phone https://www.microsoft.com/store/apps/9wzdncrfhxns ,you will get it back default like radio app.

Lumia 1320 1511 Ver build 10586.107
Please guide me to build 14393.67 Ver 1607
 

npradeeppai

Member
Jan 10, 2016
40
5
I'm using Nokia lumia 520 and somehow using the device targeting info of Lumia 1520 I'm on 14393.693 ( RS1). I registered to windows insider in the settings>update & security> Windows insider programme and selected the fast ring. I checked for updates ( I wish to get RS2 Creators update builds) . But it shows my phone is up to date.
I hard reset my phone used the registry values of Lumia 930 still no use. I need to get windows 10 150xx builds ( RS2). Please help

---------- Post added at 06:55 PM ---------- Previous post was at 06:22 PM ----------

Hi all,

Redstone Insider Builds Supported Devices :-

Alcatel OneTouch Fierce XL || || Lumia 535 || || Lumia 640 || || Lumia 930 ||

BLU Win HD W510U || || Lumia 540 || || Lumia 640 XL || || Lumia 950 ||

BLU Win HD LTE X150Q || || Lumia 550 || || Lumia 650 || || Lumia 950 XL ||

Lumia 430 || || Lumia 635 (1GB) || || Lumia 730 || || Lumia 1520 ||

Lumia 435 || || Lumia 636 (1GB) || || Lumia 735 || || MCJ Madosma Q501 ||

Lumia 532 || || Lumia 638 (1GB) || || Lumia 830 || || Xiaomi Mi4 ||

=================================================================================================================================================
Disclaimer :modifying registry and getting update may cause serious damage to your phone ,
The XDA Developers community, Microsoft and me are not responsible for any damage to your device,think twice and decide to go or not

its only for most enthusiastic people to who risk their devices to try new builds
====================================================================================

For Easy & simple upgrade install DHT Upgrade Advisor & follow the post ==>here
DHT Upgrade Advisor
app
dependencies
=====================================================================
Follow the Below Steps :-
======================================================================
After every Reset/Flash, first turnoff automatic update setting in store ,don't update Extras+info.
if you got 0x80091007 error after downloading update ,Hard-reset is required,you need to download again with strong WiFi connection
================================
Interop-Unlock your Device
=================================
1) Download WP sdk tools 8.0 lite :source zippyshare and click on "install.bat " click "Yes" for every prompt
Goto ("C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment") and open "Xap Deployment.exe"

2 )Deploy @vcfan Lumia registry editor vcReg_1.5 or vcREG_1_6_W10M

[ Go to vcreg-->(. . .)-->templates-->check mark , live interop and restore Ndtksvc and click on apply
=========================
Editing Registry Values
=========================
try to deploy custom pfd 6 with same "xap Deployment.exe",if its not successful then

3 ) Download WP sdk tools 8.1 lite source Zippyshare and extract it,click on "InstallWP81SDKToolsLite.bat" accept all prompts .

goto "C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.1\Tools\AppDeploy" and open " AppDeploy.exe" .

download customPFD (@Pasquiindustry) and deploy it.

move to HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo then

take the screenshots of your device original values and move to SDcard,you can restore same values anytime

a)change " PhoneManufacturer " = MicrosoftMDG
b)change " PhoneManufacturerModelName " = RM-1085_11302 (for Single SIM devices) // *** For all dual sim devices try = RM-1116_11258 ***


4) change PhoneModelName = Lumia 950 XL (single sim) or Lumia 950 XL Dual SIM (for dual)

5)change PhoneHardwareVariant = RM-1085

6)install windows insider from store

check for the update ,if not try below 930 values too

Lumia 930 Registry values :-

PhoneHardwareVariant : RM-1045
PhoneManufacturer : NOKIA
PhoneManufacturerModelName : RM-1045_1003
PhoneModelName : Lumia 930

====================================================================================================================================================
for those who are not getting update change below values also

first you need to select similar Hardware device in supported list ,but select single to single,dual to dual sim devices

go to http://www.lumiafirmware.com and select your similar device and your device country variant .

change above 4 values according to selected device
and
change below values at
HKLM/SOFTWARE/OEM/Nokia/Variant/BSPRelease
HKLM/SOFTWARE/OEM/Nokia/Variant/ConfigurationID
check below images for values,enter the values of your selected device at http://www.lumiafirmware.com

and check for updates,if not try to change

HKLM/SOFTWARE/OEM/Nokia/Variant/labelID ("CorebuildID") of your selected device,

i don't have other devices except 1520 for 1520 =9032.18(FW version) ,you need to search in web for your selected device's extras+info screenshot's ,some of them show CorebuildID in it

this below image for dual sim,selected device is 730,for single sim try 830 of your CV at http://www.lumiafirmware.com




Radio FM Phone https://www.microsoft.com/store/apps/9wzdncrfhxns ,you will get it back default like radio app.

What is the configuration id and core build Id of Lumia 930 (single sim)
Couldn't find screen shot of extras & info of 930. Please reply
 

raghulive

Senior Member
Feb 15, 2015
359
127
Bengaluru
I'm using Nokia lumia 520 and somehow using the device targeting info of Lumia 1520 I'm on 14393.693 ( RS1). I registered to windows insider in the settings>update & security> Windows insider programme and selected the fast ring. I checked for updates ( I wish to get RS2 Creators update builds) . But it shows my phone is up to date.

I hard reset my phone used the registry values of Lumia 930 still no use. I need to get windows 10 150xx builds ( RS2). Please help



---------- Post added at 06:55 PM ---------- Previous post was at 06:22 PM ----------





What is the configuration id and core build Id of Lumia 930 (single sim)

Couldn't find screen shot of extras & info of 930. Please reply

Your Lumia 520 had 512MB RAM , that's stopping getting RS2

Sent from mTalk
 

sigfrid696

Member
Jan 11, 2010
31
15
I'm experimenting Skype Preview problem: the microphone is not recognized and no audio option can be found in settings; so during call the other doesn't hear me. I'm on AU stable, lumia 1020 (phone model hack). I don't know when the problem started because I don't use Skype very often.
Is there a fix ? Is this happening because of the phone model hack ? Because a friend with 650 doesn't have the problem.
Thank You
 

dxdy

Senior Member
Apr 17, 2008
5,051
2,109
48
www.red-gsm.net
Nokia Lumia 920
Xiaomi Mi Mix 2S
I'm experimenting Skype Preview problem: the microphone is not recognized and no audio option can be found in settings; so during call the other doesn't hear me. I'm on AU stable, lumia 1020 (phone model hack). I don't know when the problem started because I don't use Skype very often.
Is there a fix ? Is this happening because of the phone model hack ? Because a friend with 650 doesn't have the problem.
Thank You

did you give permission Skype to use microphone? in phone privacy settings (Settings > Privacy > Microphone)?
 
Last edited:

sigfrid696

Member
Jan 11, 2010
31
15
did you give permission Skype to use microphone? in phone privacy settings (Settings > Privacy > Microphone)?

Yes, already checked and the permission was ok. Tried also to re-install the app but no success.
It seems like a driver problem, or maybe related to the model change in order to install redstone. Has Anyone the same issue ?
 

EspHack2

Senior Member
Aug 8, 2016
124
16
I'm experimenting Skype Preview problem: the microphone is not recognized and no audio option can be found in settings; so during call the other doesn't hear me. I'm on AU stable, lumia 1020 (phone model hack). I don't know when the problem started because I don't use Skype very often.
Is there a fix ? Is this happening because of the phone model hack ? Because a friend with 650 doesn't have the problem.
Thank You

it was an update a few months ago where they finally implemented the new audio thingy that came with RS1 for noise cancellation I think, you can try getting an older version of skype, btw the mic and drivers are just fine, try sending a skype video and it will record just fine, everything else will work just fine too(calls on other apps etc)

so just ask skype to remove their useless supposedly audio improving RS1-only "feature"
 

sigfrid696

Member
Jan 11, 2010
31
15
Thank you for the explanation...where do you think I can find the old skype preview xap files ? Because I googled around but I didn't find any valid site...I think I'll also post the problem on skype forum. I don't understand, microsoft apps are the only that upgrade after upgrade leave behind the old users without any reason...
Thanks!
 

Top Liked Posts

  • There are no posts matching your filters.
  • 23
    Hi all,

    Redstone Insider Builds Supported Devices :-

    Alcatel OneTouch Fierce XL || || Lumia 535 || || Lumia 640 || || Lumia 930 ||

    BLU Win HD W510U || || Lumia 540 || || Lumia 640 XL || || Lumia 950 ||

    BLU Win HD LTE X150Q || || Lumia 550 || || Lumia 650 || || Lumia 950 XL ||

    Lumia 430 || || Lumia 635 (1GB) || || Lumia 730 || || Lumia 1520 ||

    Lumia 435 || || Lumia 636 (1GB) || || Lumia 735 || || MCJ Madosma Q501 ||

    Lumia 532 || || Lumia 638 (1GB) || || Lumia 830 || || Xiaomi Mi4 ||

    =================================================================================================================================================
    Disclaimer :modifying registry and getting update may cause serious damage to your phone ,
    The XDA Developers community, Microsoft and me are not responsible for any damage to your device,think twice and decide to go or not


    its only for most enthusiastic people to who risk their devices to try new builds
    ====================================================================================

    For Easy & simple upgrade install DHT Upgrade Advisor & follow the post ==>here
    DHT Upgrade Advisor
    app
    dependencies
    =====================================================================
    Follow the Below Steps :-
    ======================================================================
    After every Reset/Flash, first turnoff automatic update setting in store ,don't update Extras+info.
    if you got 0x80091007 error after downloading update ,Hard-reset is required,you need to download again with strong WiFi connection
    ================================
    Interop-Unlock your Device
    =================================
    1) Download WP sdk tools 8.0 lite :source zippyshare and click on "install.bat " click "Yes" for every prompt
    Goto ("C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.0\Tools\XAP Deployment") and open "Xap Deployment.exe"

    2 ) Deploy @vcfan Lumia registry editor vcReg_1.5 or vcREG_1_6_W10M

    [ Go to vcreg-->(. . .)-->templates-->check mark , live interop and restore Ndtksvc and click on apply
    =========================
    Editing Registry Values
    =========================
    try to deploy custom pfd 6 with same "xap Deployment.exe",if its not successful then

    3 ) Download WP sdk tools 8.1 lite source Zippyshare and extract it,click on "InstallWP81SDKToolsLite.bat" accept all prompts .

    goto "C:\Program Files (x86)\Microsoft SDKs\Windows Phone\v8.1\Tools\AppDeploy" and open " AppDeploy.exe" .

    download customPFD (@Pasquiindustry) and deploy it.

    move to HKLM-->SYSTEM-->Platform-->DeviceTargetingInfo then

    take the screenshots of your device original values and move to SDcard,you can restore same values anytime

    a)change " PhoneManufacturer " = MicrosoftMDG
    b)change " PhoneManufacturerModelName " = RM-1085_11302 (for Single SIM devices) // *** For all dual sim devices try = RM-1116_11258 ***


    4) change PhoneModelName = Lumia 950 XL (single sim) or Lumia 950 XL Dual SIM (for dual)

    5)change PhoneHardwareVariant = RM-1085

    6) install windows insider from store

    check for the update ,if not try below 930 values too

    Lumia 930 Registry values :-

    PhoneHardwareVariant : RM-1045
    PhoneManufacturer : NOKIA
    PhoneManufacturerModelName : RM-1045_1003
    PhoneModelName : Lumia 930

    ====================================================================================================================================================
    for those who are not getting update change below values also

    first you need to select similar Hardware device in supported list ,but select single to single,dual to dual sim devices

    go to http://www.lumiafirmware.com and select your similar device and your device country variant .

    change above 4 values according to selected device
    and
    change below values at
    HKLM/SOFTWARE/OEM/Nokia/Variant/BSPRelease
    HKLM/SOFTWARE/OEM/Nokia/Variant/ConfigurationID
    check below images for values,enter the values of your selected device at http://www.lumiafirmware.com

    and check for updates,if not try to change

    HKLM/SOFTWARE/OEM/Nokia/Variant/labelID ("CorebuildID") of your selected device,

    i don't have other devices except 1520 for 1520 =9032.18(FW version) ,you need to search in web for your selected device's extras+info screenshot's ,some of them show CorebuildID in it

    this below image for dual sim,selected device is 730,for single sim try 830 of your CV at http://www.lumiafirmware.com

    attachment.php



    Radio FM Phone https://www.microsoft.com/store/apps/9wzdncrfhxns ,you will get it back default like radio app.
    7
    Glance working on lumia 1020 Win Redstone 10.0.14390.0.

    Glance working on lumia 1020 Win Redstone 10.0.14390.0.

    I have restored this keys from my backup 10.0.10586.494.

    Code:
    [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Nokia\lpm]
    "AlwaysOnInCharger"=dword:00000000
    "AppGraphicTimeout"=dword:00000000
    "BSSwitchOffTimeout"=dword:0000001e
    "ClockAndIndicatorsCustomColor"=dword:00000000
    "DarkMode"=dword:00000000
    "DarkModeElements"=dword:0000000f
    "DarkModeEnd"=dword:000001a4
    "DarkModeOverrideColor"=dword:00000000
    "DarkModeStart"=dword:00000528
    "DarkModeThreshold"=dword:00004e20
    "DoubleTapEnabled"=dword:00000000
    "Enabled"=dword:00000001
    "MinimizeIcon"=dword:00000000
    "Mode"=dword:00000000
    "MoveClock"=dword:00000000
    "NormalModeElements"=dword:0000001f
    "SwipeEnabled"=dword:00000000
    "SwitchOffTimeout"=dword:0000000f
    "PanelType"=dword:00000001
    "ShowDetailedAppStatus"=dword:00000000
    "ShowSystemNotifications"=dword:00000000
    "FontFile"="\\Data\\SharedData\\OEM\\Public\\lpmFonts_4.1.12.4\\lpmFont_wxga.bin"
    "AppGraphicGestures"=dword:00000000
    "SingleTapWakeup"=dword:00000000
    "EnablePublicSDK"=dword:00000000
    "SupportedTouchEvents"=dword:00000000

    And

    Code:
    [HKEY_LOCAL_MACHINE\SOFTWARE\OEM\Nokia\NokiaSvcHost\Plugins\NsgGlance\NlpmService]
    "PluginPath"="\\Data\\SharedData\\OEM\\Public\\NsgGlance_NlpmServiceImpl_4.1.12.4.dll"
    "Path"="C:\\Data\\SharedData\\OEM\\Public\\NsgGlance_NlpmService_4.1.11.3.dll"
    "Version"="4.1.12.4"
    "PluginVersion"="4.1.12.4"
    "Enabled"=dword:00000001
    "UsingBeta"=dword:00000000
    "UseBeta"=dword:00000000
    7
    Updating to redstone right now, and I'll see if it will go into bootloop or it will works.

    EDIT: Bootloop as expected, now i'm investigating...

    Seems to be winload.efi
    Anyway, i'll go back to Windows 10.10586.x and the upgrade to 14295 (the working one from slow-ring).
    Then i'll try to capture the file that will be updated when it will upgrade to 14332
    7
    NsgGlance-Lumia 1020-10.0.10586.494
    6
    If not working check this

    Code:
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\NlpmService]
    "Description"="Standby screen service"
    "DisplayName"="NlpmService"
    "ErrorControl"=dword:00000000
    "FailureActions"=hex:80,51,01,00,00,00,00,00,00,00,00,00,04,00,00,00,14,00,00,\
      00,01,00,00,00,e8,03,00,00,01,00,00,00,e8,03,00,00,01,00,00,00,e8,03,00,00,\
      00,00,00,00,00,00,00,00
    "ImagePath"="c:\\windows\\system32\\OEMServiceHost.exe -k NsgGlance"
    "ObjectName"="LocalSystem"
    "PreshutdownTimeout"=dword:00000032
    "RequiredPrivileges"=hex(7):53,00,65,00,43,00,68,00,61,00,6e,00,67,00,65,00,4e,\
      00,6f,00,74,00,69,00,66,00,79,00,50,00,72,00,69,00,76,00,69,00,6c,00,65,00,\
      67,00,65,00,00,00,53,00,65,00,49,00,6e,00,63,00,72,00,65,00,61,00,73,00,65,\
      00,57,00,6f,00,72,00,6b,00,69,00,6e,00,67,00,53,00,65,00,74,00,50,00,72,00,\
      69,00,76,00,69,00,6c,00,65,00,67,00,65,00,00,00,53,00,65,00,43,00,72,00,65,\
      00,61,00,74,00,65,00,47,00,6c,00,6f,00,62,00,61,00,6c,00,50,00,72,00,69,00,\
      76,00,69,00,6c,00,65,00,67,00,65,00,00,00,00,00
    "ServiceSidType"=dword:00000001
    "Start"=dword:00000003
    "Type"=dword:00000020
    
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\NlpmService\Parameters]
    "ServiceDll"=hex(2):25,00,53,00,79,00,73,00,74,00,65,00,6d,00,52,00,6f,00,6f,\
      00,74,00,25,00,5c,00,53,00,79,00,73,00,74,00,65,00,6d,00,33,00,32,00,5c,00,\
      4e,00,6c,00,70,00,6d,00,53,00,65,00,72,00,76,00,69,00,63,00,65,00,2e,00,64,\
      00,6c,00,6c,00,00,00
    "ServiceDllUnloadOnStop"=dword:00000001
    
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\NlpmService\TriggerInfo]
    
    [HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\Services\NlpmService\TriggerInfo\0]
    "Action"=dword:00000001
    "Data0"=hex:75,38,bc,a3,3e,06,8a,41
    "Data1"=hex:00,00,00,00,01,00,00,00
    "DataType0"=dword:00000001
    "DataType1"=dword:00000001
    "Guid"=hex:16,28,7a,2d,5e,0c,fc,45,9c,e7,57,0e,5e,cd,e9,c9
    "Type"=dword:00000007