Windows Phone Internals - Unlock bootloader, enable Root Access, create Custom ROM

[afi1982]

not working , my phone recognize as USB input device

I just need to mention that when I hear the vibration my screen stay off, I can't even see if my phone is in charging mode

 

[_wook_]

I just need to mention that when I hear the vibration my screen stay off, I can't even see if my phone is in charging mode

Can you provide Hardware ID of device detected by PC?
(Computer management > Right click on the device > Properties > Details tab > Property: Hardware Ids; post Value here)

 

[afi1982]

can you provide hardware id of device detected by pc?
(computer management > right click on the device > properties > details tab > property: Hardware ids; post value here)

usb\vid_05c6&pid_f006&rev_0000
usb\vid_05c6&pid_f006

 

[_wook_]

usb\vid_05c6&pid_f006&rev_0000
usb\vid_05c6&pid_f006

Are you able to detach the battery?
If you are, before turning the power button press and hold volume down and then attach to USB cable. It should show different device. And you should be able to flash it (Either with WPInternals or WDRT).

//edit:
Retry the procedure several times with and without battery. At some point it should be in DLOAD mode.

 

[kukmikuk]

Are you able to detach the battery?
If you are, before turning the power button press and hold volume down and then attach to USB cable. It should show different device. And you should be able to flash it (Either with WPInternals or WDRT).

remove battery
press vol down and then insert usb cable
dont insert battery

?

---------- Post added at 09:48 PM ---------- Previous post was at 09:48 PM ----------

Are you able to detach the battery?
If you are, before turning the power button press and hold volume down and then attach to USB cable. It should show different device. And you should be able to flash it (Either with WPInternals or WDRT).

usb\vid_05c6&pid_f006&rev_0000
usb\vid_05c6&pid_f006

remove battery
press vol down and then insert usb cable
dont insert battery

 

[_wook_]

remove battery
press vol down and then insert usb cable
dont insert battery

?

---------- Post added at 09:48 PM ---------- Previous post was at 09:48 PM ----------





remove battery
press vol down and then insert usb cable
dont insert battery

My bad, the battery should be reattached, but to tell you the truth, I flashed (via USB) one Lumia 1020 that didn't had battery inside.

 

[afi1982]

My bad, the battery should be reattached, but to tell you the truth, I flashed (via USB) one Lumia 1020 that didn't had battery inside.

still not working

 

[_wook_]

still not working

All drivers are installed properly?
WPInternals should be running and waiting for the phone to be connected.

 

[Heathcliff74]

I just need to mention that when I hear the vibration my screen stay off, I can't even see if my phone is in charging mode

Yes. But did you try keeping it connected for an hour? There are multiple emergency charging modes. And usually USB input device means some charging mode.

 

[afi1982]

Yes. But did you try keeping it connected for an hour? There are multiple emergency charging modes. And usually USB input device means some charging mode.

i'm trying, let hope that it will work (phone usually get hot when charging but not at all now)

---------- Post added at 11:12 PM ---------- Previous post was at 11:12 PM ----------

All drivers are installed properly?
WPInternals should be running and waiting for the phone to be connected.

yeah everything installed

 

[_wook_]

i'm trying, let hope that it will work (phone usually get hot when charging but not at all now)

---------- Post added at 11:12 PM ---------- Previous post was at 11:12 PM ----------



yeah everything installed

Good luck mate.

 

[G.moe]

did you try keeping it connected for an hour? There are multiple emergency charging modes. And usually USB input device means some charging mode.

Would you please explain how it changes modes by sitting for a length of time? Very interesting

(phone usually get hot when charging but not at all now)

My reply is a bit off-topic, but for future info it's usually the battery that's getting hot, not the phone itself.

 

[Heathcliff74]

i'm trying, let hope that it will work (phone usually get hot when charging but not at all now)

Charging on PC is always slower. Less heat. That's why i said at least an hour.

Good luck. Hope it works.

 

[Heathcliff74]

how to check that? I am using restorator to change the UI.

[Edit1]
I found the differences how to change the checksum?

Checksum seems okay. I will try to reproduce the problem.

 

[Heathcliff74]

Would you please explain how it changes modes by sitting for a length of time? Very interesting

That's not what i meant. There are many boot stages: PBL, SBL, UEFI, OS. Every stage has it own implementation of emergency charging. When the phone is still in an early boot stage, it might not even have a display-driver loaded. And charging will be done without showing anything. I just meant that when you charge by connecting to PC, charging is very slow. So you need to give it some time to properly charge (if that actually works).

 

[Heathcliff74]

Checksum seems okay. I will try to reproduce the problem.

I tried this:
- Patch file
- Recalculate checkum
- Replace file

My phone still boots normally. So that means that the integrity-checks are properly disabled.

Either your icon-editor screws things up. Or you screwed up the Access Control List of the file (File properties -> Security -> SYSTEM and ALLAPPPACKAGES must have access to the file).

 

[mybabysexy]

I tried this:
- Patch file
- Recalculate checkum
- Replace file

My phone still boots normally. So that means that the integrity-checks are properly disabled.

Either your icon-editor screws things up. Or you screwed up the Access Control List of the file (File properties -> Security -> SYSTEM and ALLAPPPACKAGES must have access to the file).

so exactly what i did was copied the UI.dll to my pc, used restorator to change the icons inside and saved it. then i use the 3rd party file explorer with the command writen in WPinternal to use it as admin mode and replaced the original one.

So how could this happened? The original and modded one are in the attachments. Maybe my icon-editor screws it up.

[edit] removed attachment due to adding wrong files
[edit 2] added the right files

 

[AlvaroGP]

A Lumia 950 should be arranged soon, probably.

The Lumia 950 uses a Snapdragon 808 while the Lumia 640 XL uses a Snapdragon 400. Does that mean that there is a good chance that the 640 XL will be supported soon too, or are they completely different beasts?

 

[reksden]

are you added continuum on lumia?
950xl firmware: https://cloud.mail.ru/public/9hf7/HVpa5utit
continuum: https://m.vk.com/wall-49205625_80288
without wpinternals.

 

[Heathcliff74]

so exactly what i did was copied the UI.dll to my pc, used restorator to change the icons inside and saved it. then i use the 3rd party file explorer with the command writen in WPinternal to use it as admin mode and replaced the original one.

So how could this happened? The original and modded one are in the attachments. Maybe my icon-editor screws it up.

[edit] removed attachment due to adding wrong files
[edit 2] added the right files

Did you enable Root Access first??