Windows Phone Internals updated to version 2.4

[augustinionut]

I formated the EMMC with MBR boot mode. The bad is that i unplugged the phone right after.

 

[augustinionut]

Right. Im thinking at JTAG....

 

[augustinionut]

I will try with a card reader. But….. but….. i need time.

 

[XDASumiaki]

I formated the EMMC with MBR boot mode. The bad is that i unplugged the phone right after.

That nice and delicious.
If you un-plug the usb cable, you can still re-plug, and your OS ill connect it and you can try to repair the partitions, if you remove the battery, thats the real end of the story.
Next thing you can do is emmc reflash with external adapter, thats a lot of work.
I used mbr when i was experiencing with Win 98, i was 7 years old...mbr is old stuff, nobody would use it in the future, the tech is changing every time.

 

[fil3s]

:crying: could I get the edp emergency files for lumia 640 RM_1074 ? Please help. They're not on https://www.lumiafirmware.com

 

[titi66200]

http://protobetatest.com/download/lumia-emergency-files/

 

[Doomhammer]

Hi,

i'm currently stuck in falsh mode and can neither restore to normal boot mode nor switch to mass-storage mode. Activating the mass storage mode was my primary goal.
Situation:

• OS Windows 10
• Windows Device Recovery Tool 3.14.7501 is installed
• WPInternals 2.4
• Lumia 950XL

Unlock bootloader worked fine. These files were downloaded:

• RM1085_1078.0053.10586.13169.12547.035242_retail_prod_signed.ffu
• MPRG8994_fh.ede
• RM1085_fh.edp

Switching to Mass Storage mode failed with. I wasn't yet able to find a hint to fix this. I attached the complete log (WPINternals.log), the log part of "boot to normal mode" (BootToNormalMode.txt) and the result of
WPinternals.exe /FindFlashingProfileExperimental (FindFlashingProfileExperimental..txt)

Perhaps some has an idea, how I can go back to normal mode. Thanks in advance.
Edit 1:
There was an error when first switching to mass storage mode:
Error: Phone is in Mass Storage mode, but the driver on PC failed to start
Error: Phone switched to Mass Storage mode, but the driver on the PC did not start correctly
Afterwards the phone was stuck in reboots showing a blue screen with
From the log
Found device on interface: 9e3bd5f7-9690-4fcc-8810-3e2650cd6ecc
Device path: \\?\USB#VID_045E&PID_0A02#5&326c0cbc&0&6#{9e3bd5f7-9690-4fcc-8810-3e2650cd6ecc}
Connected device: Lumia
Mode: Bootloader
Lumia disconnected

Edit 2:
I've read somewhere, that I should use an USB 2.0 port. So I'm up for a new approach.
I switched to another PC, installed WDRT, downloaded WP Internals. Started WP Internals, clicked "Switch to mass storage mode. "No FUF profile file found". Copied C:\ProgramData\WPInternals\Repository from the other PC, started WP Internals. Same error again. Used the downloaded section for downloading all files again. Profile file was found, entering Mass-storage mode and I was created with the blue scree ;(.
Clicked on "interrupt boot mode", which worked fortunatly and my second try to enter mass storage mode was greeted by a new device "MainOs" found Windows 10 notification. Currently running a backup.
I just hope, that I can switch to normal mode later on.

 

[DaniDeVega]

Hi! @Heathcliff74 and users of WPI.



Recently bricked my Lumia 920 while trying to unlock bootloader for cable disconnect failure. The cable disconnected while moving my device to place it on table. Now, it just connect in Emergency mode and PC recognise it like QHUSB_DLOAD and Qualcomm HS-USB QDLoader 9008 (COM3).



I really have the correct drivers installed since many months ago, and remember that in the past I solved a similar issue, but can't remember how it was.



Is projected to add in a near future, in WPI, any option that would recognise the Emergency Download mode, like Flash, Label and Normal modes? It could be great to make easier to work with this kind of issues with the same tool.



If not, is possible to access in this moment to the device and fix this? Tried NDRT and WPRT, but the first has servers now off and the second tool works now in this mode with Lumias that are just MICROSOFT Lumia devices, but no with NOKIA Lumia devices. This, get users of older Nokia Lumias in a kind of limb without official solutions.



Does anyone know anything that could help me?

Thanks in advance.

---------- Post added at 00:42 ---------- Previous post was at 00:35 ----------

Ah! I forgot to really thanks to @Heathcliff74 for develop this magical tool. Without it, it could be nearly impossible to modify, restore, unbrick, ... definitively, to work inside with our Lumia Phones.



Would like to have the possibility to donate to you for your work, but I'm without job many time ago and get now my accounts to zero. But be sure that, the follower month after the day that I find a job, you will see an amount from DaniDeVega into your donations account. What possibilities will let me.

 

[RomLord14495]

Hi! @Heathcliff74 and users of WPI.



Recently bricked my Lumia 920 while trying to unlock bootloader for cable disconnect failure. The cable disconnected while moving my device to place it on table. Now, it just connect in Emergency mode and PC recognise it like QHUSB_DLOAD and Qualcomm HS-USB QDLoader 9008 (COM3).



I really have the correct drivers installed since many months ago, and remember that in the past I solved a similar issue, but can't remember how it was.



Is projected to add in a near future, in WPI, any option that would recognise the Emergency Download mode, like Flash, Label and Normal modes? It could be great to make easier to work with this kind of issues with the same tool.



If not, is possible to access in this moment to the device and fix this? Tried NDRT and WPRT, but the first has servers now off and the second tool works now in this mode with Lumias that are just MICROSOFT Lumia devices, but no with NOKIA Lumia devices. This, get users of older Nokia Lumias in a kind of limb without official solutions.



Does anyone know anything that could help me?

Thanks in advance.

---------- Post added at 00:42 ---------- Previous post was at 00:35 ----------

Ah! I forgot to really thanks to @Heathcliff74 for develop this magical tool. Without it, it could be nearly impossible to modify, restore, unbrick, ... definitively, to work inside with our Lumia Phones.



Would like to have the possibility to donate to you for your work, but I'm without job many time ago and get now my accounts to zero. But be sure that, the follower month after the day that I find a job, you will see an amount from DaniDeVega into your donations account. What possibilities will let me.

This can be fixed

---------- Post added at 02:40 AM ---------- Previous post was at 02:39 AM ----------

Lets take a trip back in time ...I can use a sbl3 520.bin on a 521?

 

[RomLord14495]

Yes, 520 SBL3 works on 520/521/525/526

No it bricked my 521 I got another one tho I didn't use the slb3 on

 

[fil3s]

Hopefully Heathcliffs next release recognises qhsusb bulk.

 

[RomLord14495]

It DOES work on them, if it was bricked in an un-repairable way, that wasn't the fault of the SBL3

I unlocked another 521 fine without the sbl3.. I add the sbl3 in it bricks its strange I'm not saying it doesn't work ..I'm wondering why it bricked with the correct files .I'm not worry about the brick its such a cheap phone

 

[RomLord14495]

What exactly does happen? What kind of brick do you get?

It vibrates on a black screen no qusbdliad or bulk nothing happens plugged in multiple cabled

 

[RomLord14495]

if it vibrates, then SBL3 works

So why does it not do anything

 

[RomLord14495]

520.bin

 

[RomLord14495]

Where did you get that file from? It might have been a normal SBL3 instead of an engineering one

I got it here https://forum.xda-developers.com/wi...r-flashing-t3491754/post69407502#post69407502
Ive used these before

 

[RomLord14495]

I can repair it but the computer doesn't detect it in any way or form not even qusb dload

 

[RomLord14495]

Yeah, that's the tricky part of the repairing process, you have to get it into QHSUSB_DLOAD first

I'm guessing a short circuit is involved

 

[RomLord14495]

That's the easiest way

Pm instructions?

 

[augustinionut]

Pm instructions?

Pm is postmortem? No ofence