if you got the 10 plus from Amazon , you can akways return it. buy again.
[WINDOWS][TOOL]Fire Toolbox V27.0
- Thread starter Datastream33
- Start date
I can't find the Amazon Shopping app. I don't have the Play Store version installed and I have not disabled either the Amazon version or the Amazon App Store using the Toolkit. Should I disable the Amazon App Store? Any other suggestions.
Thanks
Thanks
It's called "Shop Amazon" on the Fire devices (and a different icon to the Amazon Shopping app), had me flummoxed for a while, too, especially as the Play Store version doesn't appear to work on these tablets.
I just got my first Fire (HD8) in years and immediately used the toolbox to change some things. Now I'm stuck, though: I changed the lockscreen security type with the toolbox to pattern and now I would like to change it back to a PIN. When I start the "change lock screen security type", the Fire screen shows that I have to "confirm your current PIN" to continue. But I don't have a current PIN, as I have the pattern now.
Entering the previous PIN doesn't help, neither does converting the pattern into a pin according to this. Does anyone know how I can revert back to a PIN?
Entering the previous PIN doesn't help, neither does converting the pattern into a pin according to this. Does anyone know how I can revert back to a PIN?
Yup it's an app you get through the toolbox that automates launcher selection @Datastream33 may be able to help you further as I haven't installed it yet.
My Fire HD 10 (11th gen) is on 7.3.2.2, I tried the tool (I hadn't seen that there were problems with this update) to disable Shop Amazon and Silk browser, both do seem to have worked fine even after a few restarts (confirmed as "disabled" in settings -> apps). I did also try and disable OTA, seemed to work fine but the toolbox would keep showing the pop-up warning me that OTA was on. Is there any easy way to tell on the tablet if OTA is on / off?
stupidly updated my new 8 HD PLUS to Fire OS 7.3.2.2 now nothing works at all. I can't even manually install googple play services or palystore or gboard.
Whenw ill the toolbox be udpated?? Thanks.
Whenw ill the toolbox be udpated?? Thanks.
Oh no, that should really be mentioned in the toolbox before. Now I have to keep the pattern, as I will not go through setting everything up again the way I want.
Yeah don't update. Hopefully it shows up as a gen 10 in the settings then you know you can delete Amazon launcher.
Right, thanks, checked and OTA is definitely still enabled. Fingers crossed for a fix! At least I've been able to disable Shop Amazon and Silk which were the two main things I wanted to for now. I've also tried disabling lock screen ads and that also seems to still work, even after restarts.
The same thing happened to me, but I managed to reset the PIN. I don't remember if I remotely reset it (that option doesn't seem to show up now, though) or put the wrong pattern in the lockscreen 5 times.
One minor annoyance. I'm using Google Calendar and the "Google Calender Widget," which pulls its data from Google Calendar. I use the widget on all my other devices without issue. The problem is that the widget will not populate on startup; it's blank. But if I launch Google Calendar from the app drawer, refresh it from the hamburger menu, exit, and refresh the widget, all the data appears. Any suggestions will be appreciated.
BTW, all in all, the Toolkit is great. I have always rooted and flashed custom Roms on my Android devices which can be updated and upgraded. I guess the way to update/upgrade Fire tablets is to buy a new one and debloat it, etc, with a future Toolkit version.
Thanks
BTW, all in all, the Toolkit is great. I have always rooted and flashed custom Roms on my Android devices which can be updated and upgraded. I guess the way to update/upgrade Fire tablets is to buy a new one and debloat it, etc, with a future Toolkit version.
Thanks
Attachments
Last edited:
All the gen 11 means is that it is a 2021 model. Nothing to do with the OS version.
Similar threads
Top Liked Posts
-
1
Activity Launcher is just a means of calling already installed activities or apps. It's used because there is no provided means of accessing those activities without ADB or another program.
I hadn't actually checked what would happen if you turn off DNS66 when it was set as Always On VPN until I read your post.
It turns out that if you do turn off DNS66 with that setting on, it just gives you a notification on the Notification Bar. 
It doesn't actually stop any traffic from going through. Only the other switch below Always On VPN does that, but that doesn't play well with Amazon or DNS66 and stops all traffic. 
I guess you can leave Always On VPN turned off.
DNS66 is a low resource program and probably saves more battery than it uses by blocking extra traffic and stopping the rendering of ads. All it does is intercepts any DNS lookups and if they are on it's lists it returns 127.0.0.1 (localhost) as the numeric address for the DNS lookup where they go unanswered. The app or browser gets no response from that address so it cant connect with the intended ad server or update server. The process fails. Having an extra block on your router or a PiHole won't matter because they'll never get the request as it's been locally redirected to a dead end.
I don't recommend turning off DNS66. It might be your only defense against further updates if you are on someone else's WiFi. It most certainly isn't a bottleneck as far as speed goes. It runs on all my android devices except my phone while I'm using a real VPN. As a matter of fact, it's one of the first apps I install on any device I use just for the ad blocking.
Edit: Thanks, @manyxda for bringing this up and making me revisit the usefulness of Activity Launcher in this case. It turns out not to be needed and I've edited my tutorial post to reflect that.
1
Hi there, I notice that you struck out some key passages of your tutorial relating to Activity Launcher. What does it mean? Does it mean that Activity Launcher cannot be relied on to keep DNS66 "always running" in a Fire HD device?
In particular, may I understand:
"It turns out that changing this hidden setting does nothing more than give you an extra notification that your VPN is off."
> When DNS66 is off, Activity Launcher will not turn it back on but will tell you that it is off?
"It doesn't stop traffic, so it's useless." >
> "It" here means "if DNS66 has somehow been turned off and Activity Launcher does not turn it back on"?
"Besides, my tablet has taken to switching it off every time I boot."
> "It" here is DNS66?
"The app is still useful for finding settings that Amazon doesn't see fit to include."
> "The app" here is Activity Launcher?
> The usefulness is a reference to Activity Launcher's telling you when DNS66 is off?
"It also makes desktop shortcuts to those settings if you wish."
> Does this mean that Activity Launcher can make a desktop shortcut to DNS66?
Sorry, you don't have to answer each of these pesky exegetical questions. Just trying to understand. If in the end I have to remember to turn on DNS66 each time I reboot Fire, I would be happy enough. Activity Launcher's reminding me to do so would indeed be quite useful.
Unrelated question
I notice that your blacklist file has Linux line end. Does DNS66 work if line end is Android or Windows? (This is for when I may edit the file in the tablet, and the editor changes the line end format.) Thanks.1Hi @blaacksheep
Thnx for such detailed post abt firmware 7.3.2.2
As I realize, it took much time and efforts to find some workarounds, so really appreciate it
Still keeping vpn app running permanently and working with one button is lil bit inconvenient. Hope u guys can find more solutions
-
16Last edited 5-22-2022
What to do about F/W v. 7.3.2.2
So your Fire tablet has the latest firmware update on it (v7.3.2.2) and Fire Toolbox won't do what it's supposed to. All is not lost. I've collected some workarounds that will keep Amazon at bay. The three main problems are:
1) You can't stop Automatic updates.
2) You can't get rid of the lockscreen ads.
3) You hate the Amazon Launcher, but Amazon won't let you change it permanently.
Once those three problems are addressed, you pretty much have your tablet back. The Toolbox will still work for all the other things you want modify. First, get your tablet set up with Toolbox, install Google Services, and install the launcher you want. (Make sure to select "Enable Widget Support".) We'll take care of the Amazon Launcher later. So let's get started with the 3 main problems.
1) Automatic updates.
We need to stop the tablet from contacting Amazon to update it's firmware. We can no longer disable the service that does this, BUT, we can interfere with it's ability to contact the server from which it gets its updates. On a computer, we would modify the hosts file and block the addresses of the update servers. On an Android device, we need root access to do that, but there is an alternate way of adding things to the hosts file - with a VPN. We'll use a free and open source ad blocking VPN app to do this. The app is called DNS66 and it's available through F-Droid. You need to make sure this is always running to be protected from updates.Luckily, android has a feature to assist us in this. It's called "Always On VPN" and we need another app to access the hidden setting for this. We'll use "Activity Launcher" to get to this setting. Activity Launcher is available from Google's Play Store.
It turns out that changing this hidden setting does nothing more than give you an extra notification that your VPN is off. It doesn't stop traffic, so it's useless. Besides, my tablet has taken to switching it off every time I boot. (Thanks Amazon!) The app is still useful for finding settings that Amazon doesn't see fit to include. It also makes desktop shortcuts to those settings if you wish.
Download DNS66 to your computer from f-droid.org or from the attached file, copy it to your tablet and install it. Also go to the Play Store and install Activity Launcher. Finally, get the Amzn_Blcklist.txt that's attached to this post and copy that to your tablet. The blocklist file must remain on your tablet, so put it somewhere where it won't get deleted. I suggest in the root of your internal storage. (/storage/emulated/0)
Open DNS66. There are a couple settings that must be changed. On the Start tab, turn on "Watch Connection". (All 3 switches should now be on.)
Now go to the Hosts tab. Tap the "+" in the lower-right. Under Title, type "Amazon Blocklist". Tap the paper clip on the next line. Navigate to the Amzn_Blocklist.txt file you downloaded earlier and select it. Now tap "Done" in the upper-right. You should now have the first and last entry on the displayed list selected.
Now go to the Apps tab. Turn on "Show System Apps". Tap the gear under the Show System Apps switch and select "No Apps". All the switches below that should now be off.
You can optionally set your own DNS servers on the next screen if you'd like. I like to turn on Custom DNS Servers, deselect the German ones that are pre-selected, and then turn on the last two servers (CloudFlare).
This can also be done with Toolbox making this step unnecessary. Now go back to the Start tab. Tap "Start". It will notify you that it wants to connect to a VPN. Tap Yes or OK and allow it.
Quick note: Do not use the Toolbox DNS changer in Modify System Settings AND the DNS66 Custom DNS setting together. This will cause connectivity to fail. I use DNS66 and not Toolbox's DNS changer. It caused me hours of grief trying to figure out why Google couldn't connect!
Now Launch Activity Launcher. Tap the magnifying glass in the upper-right. Enter "VPN". One setting should appear called "VPN". Tap it. Tap the gear on the end of the DNS66 line. Turn on Always-on VPN. Turning on the other switch makes Google Services think you are disconnected, so leave that one off. Step one accomplished.
Notes:
DNS66 takes several seconds before it gets started when you first boot, so it is possible that the tablet will make a DNS query for the update server or the lockscreen ad server before it loads. Best practice is to turn off WiFi before you power down or reboot.
----------
2) Lockscreen Ads.
It turns out, that blocking those update servers also blocks your tablet from getting any lockscreen
ads! No further action is needed. I stopped investigating this because I chose to disable the lockscreen completely. If you want to do that, you can do it in Toolbox, or in Activity Launcher that you just installed. Launch Activity Launcher. Tap the magnifying glass. Type in "screenlock". Now tap the last item (.password.ScreenLockSuggestionActivity). Select None and you're done.
Notes:
It has come to my attention that when disabling your PIN, it may still ask you for a PIN by Parental Controls for some settings or activities. I would suggest if you're going to disable your PIN, to first set it to something simple like 0000, reboot it, and then disable the PIN. That way you'll know what PIN you set if it suddenly asks you next month for your PIN.
Another way to disable lockscreen ads is detailed Here.
----------
3) Amazon Launcher.
The way we're going to get rid of the Amazon Launcher is by not calling it! We're going to replace the Home button with another button that we can map to any launcher we'd like. This isn't a perfect solution, but it is FREE. If you're willing to spend a couple bucks, you can purchase a more configurable gesture navigation app with more features, but this is FREE, so maybe you can accept it's shortcomings. I'll keep this post updated with other navbar replacements that people suggest.
Go to the Play Store. Get and install "One Button Navigation". Launch it. It will want you to turn on Accessability Service for it. Follow the on-screen instructions and turn on "One Button Navigation Bar". You'll see your new nav button at the bottom of the screen. I like to adjust the width down to a dot, like the button it's replacing, but that's up to you. I also like to make the background black and the botton bright yellow so that I'm reminded it's running. Set up the background and button colors as you like them. Yeah, I know the ads in this are obtrusive, but you'll never see them once it's set up. Also DNS66 will block the ads if you install that first.
Next tap the Action tab. Tap "Single Click". Scroll down and select "Launch Application...". Select the launcher that you installed with Toolbox here. In my case, it was Nova 7. (Google updated the Nova version that Toolbox installed.) Now you can set any other actions you'd like for the new button.
I didn't want anything additional, so I made the gestures similar to the original buttons. This is all up to you. You can reverse them or set additional functionality to the button. I ended up with a new navbar that covers the original navbar (the one with the home button that brings up the Amazon Launcher). I now have a button that when pressed, takes me to my launcher. When I swipe it left, it goes back a screen. When I swipe it right, it shows the recents. I spent a lot of time with other navbar replacements and this is the minimalist replacement that works best for me. YMMV. Before someone complains that it doesn't work in landscape mode, I'm not the developer. You should rate it and leave a comment for him! This is the best I could find that does what I want for FREE.
----------
I'll edit this post with your suggestions for better solutions to these problems and keep a list of navbar replacements that people suggest at the end so you can find what works best for you.
----------------------------------------------------------
Some Suggested Navigation Bar replacements:
----------------------------------------------------------
One Button Navigation Bar by Nu-Kob (PlayStore)
Pie Control by coolAce (PlayStore)
Simple Control by coolAce (PlayStore)
DNS66 is available from F-Droid.org (dated March 26, 2021)
Activity Launcher is available from APKMirror.com (dated March 21,2022)3
I've cleared the storage as instructed, and can happily report the update is goneSo, I did some research, and it looks like the updates are stored in: /data/ota-package/. Might not be able to delete the update due to not having the proper permissions. Perhaps, a factory reset is the best way to go in this situation...
EDIT: Hmm, maybe we don't want to factory reset either... if the update hasn't installed already, it's waiting for the user to manually start the update due to automatic updates being disabled. A factory reset may enable automatic updates and starting installing the update... hmmm...
Maybe try clearing the Storage for System Updates (both entries in Settings), DeviceSoftwareOTA, and also for Download Manager.
Thanks again for your help!3
Wait, how did I miss this?
This is AMAZING @blaacksheep! You've really out done yourself this time!
I can't imagine how much time you've spent on this post and research. I just want to express my gratitude for the amazing time and effort you put in on the daily! I also see you've purchased a new tablet to update it to 7.3.2.2 in order to figure these things out. My sir, you've gone above and beyond the call of duty! I don't even know what to say at this point... but THANK YOU!2
First, turn off WiFi until you've determined what version f/w you have. Next, go into Settings > Device Options > System Updates. The first line will tell you what version you're running.
Edit: If you have an earlier version than 7.3.2.2, run toolbox immediately, turn off OTA Updates and Automatic Updates, and count yourself lucky!
2 -
302
═══════════════════════════════════
Fire Toolbox V27.0
All-In-One Toolbox for Fire Tablets!
═══════════════════════════════════
The Fire Toolbox is a collection of useful ADB (Android Debug Bridge) tweaks that can be applied to Amazon's Fire Tablets. The Toolbox project aims to help users fully customize and unlock the full potential of their tablets by putting all the power into their hands.The Toolbox doesn't touch the system partition meaning all changes made can be reversed either through the tools/subtools themselves or through a factory reset. This means the Toolbox does NOT void your warranty.
Device Name: Generation:Amazon Fire 10/10+ (2021) 11Amazon Fire 8/8+ (2020) 10Amazon Fire 10 (2019) 9Amazon Fire 7 (2019) 9Amazon Fire 8 (2018) 8Amazon Fire 10 (2017) 7Amazon Fire 8 (2017) 7Amazon Fire 7 (2017) 7Amazon Fire HD8 (2016) 6Amazon Fire HD10 (2015) 5Amazon Fire HD8 (2015) 5Amazon Fire HD7 (2015) 5Amazon Fire HD7 (2014) 4Amazon Fire HD6 (2014) 4
In this forum, you may hear the word "generation" being used when talking about Fire Tablets. Just know that "generation" effectively means the same as "what year was the tablet manufactured?". This may seem confusing and as a result a reference table has been provided for you below.
Getting the Toolbox up and running with your tablet is surprisingly a very easy procedure. The only thing required is for you to enable Developer Options and ADB on your tablet. So, without further ado, let's get started.
At this point, please read the section below, and make sure to follow the correct guide that is made for your tablet on how to set up the device so it works with the Toolbox.
FIRE HD 7, 8, 10 (2018 - 2021) Guide:Before purchasing the tablet:- Make sure you uncheck the "Link device to your Amazon account to simplify setup" box before Adding to Cart. (See this screenshot, credits go to @ancientrael)
if the box remains checked, your tablet will automatically update to the latest version of FireOS the second it auto-connects to your wifi.
Booting the tablet for the first time:- Wait for your tablet to fully boot up for the first time (may take a few seconds to minutes).
- When it boots, it will ask you for the language you'd like the OS to use. Select your prefered language.
- Tapping the blue arrow at the bottom of the screen, you'll be asked to connect to a WIFI network.
- Select ANY network from the list (even if you don't know the password).
- Once it asks for the password, tap the "Cancel" button and it will take you to the previous screen with the Wifi networks.
- At the bottom of the screen, you should now see a "Skip Setup" button, go ahead and tap that.
- It will now ask if you're sure you want to skip fire setup. Just tap "Skip" once more.
- You should immeditely be thrown into Fire Launcher. You're now ready to enable USB/ADB Debugging.
Enabling USB Debugging:- Turn on your tablet and go to Settings > Device Options > About Fire Tablet and tap on the Serial Number until you unlock Developer Options.
- Press the back button and find the new Developer Options and toggle it on.
- Scroll down till you find USB Debugging and enable it.
Setting up the drivers:If you are on Windows 10 or Windows 11 you do NOT need to following this guide because Windows will setup the needed drivers by default automatically. All you need to do is plug your tablet in and Windows will take care of the rest. Please wait until these drivers are fully installed before laucnhing the Toolbox for the first time. - Download the latest version of the Toolbox from the Downloads section of this page and install it onto your PC.
- Plug your tablet into the computer, and Windows will start installing the MTP drivers. It will also attempt to install the ADB driver but will fail. (This is normal and to be expected)
- Launch the Toolbox, and it should detect your Windows version and inform you that further driver setup is required. It will then ask you if you'd like the Toolbox to download and install the drivers.
- Click the "Yes" button, wait for the download to finish and follow the driver setup. If this for some reason doesn't work, please follow this guide to manually install the drivers.
- At this point, If drivers are setup properly... the Toolbox will inform you that the "device isn't authorized. Please authorize your device now."
- On your tablet, you should see a new prompt asking if you want to Allow USB Debugging and should show the computer's RSA key fingerprint. Tick the box that says "Always allow from the computer" and hit ok.
That's it, the Toolbox should recognize your tablet and will take you to the main menu. Enjoy!
FIRE HD 6, 7, 8, 10 (2014 - 2017) Guide:Before purchasing the tablet:- Make sure you uncheck the "Link device to your Amazon account to simplify setup" box before Adding to Cart. (See this screenshot, credits go to @ancientrael)
if the box remains checked, your tablet will automatically update to the latest version of FireOS the second it auto-connects to your wifi.
Booting the tablet for the first time:- Wait for your tablet to fully boot up for the first time (may take a few seconds to minutes).
- When it boots, it will ask you for the language you'd like the OS to use. Select your prefered language.
- Tapping the blue arrow at the bottom of the screen, you'll be asked to connect to a WIFI network.
- Select ANY network from the list (even if you don't know the password).
- Once it asks for the password, tap the "Cancel" button and it will take you to the previous screen with the Wifi networks.
- At the bottom of the screen, you should now see a "Skip Setup" button, go ahead and tap that.
- It will now ask if you're sure you want to skip fire setup. Just tap "Skip" once more.
- You should immeditely be thrown into Fire Launcher. You're now ready to enable ADB Debugging.
Enabling ADB Debugging:- Turn on your tablet and go to Settings > Device Options and tap on the Serial Number until you unlock Developer Options.
- Find the new Developer Options and toggle it on.
- Scroll down till you find ADB Debugging and enable it.
Setting up the drivers:If you are on Windows 10 or Windows 11 you do NOT need to following this guide because Windows will setup the needed drivers by default automatically. All you need to do is plug your tablet in and Windows will take care of the rest. Please wait until these drivers are fully installed before laucnhing the Toolbox for the first time. - Download the latest version of the Toolbox from the Downloads section of this page and install it onto your PC.
- Plug your tablet into the computer, and Windows will start installing the MTP drivers. It will also attempt to install the ADB driver but will fail. (This is normal and to be expected)
- Launch the Toolbox, and it should detect your Windows version and inform you that further driver setup is required. It will then ask you if you'd like the Toolbox to download and install the drivers.
- Click the "Yes" button, wait for the download to finish and follow the driver setup. If this for some reason doesn't work, please follow this guide to manually install the drivers.
- At this point, If drivers are setup properly... the Toolbox will inform you that the "device isn't authorized. Please authorize your device now."
- On your tablet, you should see a new prompt asking if you want to Allow USB Debugging and should show the computer's RSA key fingerprint. Tick the box that says "Always allow from the computer" and hit ok.
That's it, the Toolbox should recognize your tablet and will take you to the main menu. Enjoy!
• ADB Shell - Spawn a Unix shell that can be used to communicate with the device and execute commands.• Custom Launcher - Replace Fire Launcher with a custom launcher.• Enable Widget Support - Enable widgets on supported launchers.• Custom Sounds - Set custom sounds for notifications, lock/unlock events, low battery, and more!• Density Modifier - Change the value of pixels per inch to either decrease or increase resolution.• Restore Default Density - Restore the factory default density.• Google Assistant - Replace Amazon Alexa with Google Assistant.• Google Services - Install Google Services and the Play Store.• Google Services (Manage)• Add/Remove Google Accounts• Clear Data/Cache for Play Services• Uninstall Play Services• Hybrid Apps - Sideload Amazon Appstore apps without having the Appstore enabled.• Keyboard and Input - Manage other input methods and install custom keyboards.• Lockscreen Wallpaper - Replace the lockscreen's wallpaper with a custom one. • Manage Amazon Apps - Manage the Amazon apps installed on your tablet.• Hide/disable Amazon Apps - Hide and Disable Amazon apps through presets or manually select apps.• Restore Amazon Apps - Completely restore every Amazon app or manually select apps to restore.• Modify System Settings - • Power Options - Reboot, shutdown, reboot into recovery, or reboot the tablet into bootloader mode.• Parental Controls Hide - Installs a service that auto-dismisses messages from Parental Controls.• Privacy Controls - Disable telemetry collection of app usage data, interest based ads, etc. • Push and Pull• Push - Transfer files from your computer to your tablet.• Pull - Retrieve files from your tablet and transfer them to your computer.• Remove Lockscreen Ads - Remove ads from the lockscreen.• Screen Capturing - Record the device's screen, or capture a screenshot.• Sideload Apps - Install APKs from sources outside of the Amazon Appstore.• System Backup • Backup - Create a backup of the current system configuration.• Restore - Restore system configuration from a previously created backup.• User Management (8th gen and above)• Create a User - Create a new user.• Delete a User - Delete a toolbox created user.• Switch Users - Switch the current user to a different Toolbox created user.• YouTube Clients - Install third-party Youtube clients.
Toolbox:
Other Downloads:
ResourceResource LinkApplicable ToolsCustom Navigation Bar IconsNavigation Bar ModifierToolbox ChangelogsN/A
VersionInstaller (.exe)Portable (.zip)Update PostVirusTotalV26.1PostLinkV25.2PostLinkV24.0DownloadPostLink*Halloween EditionDownload*Bug FixLinkV23.0DownloadPostLinkV22.0DownloadPostLinkV21.0DownloadPostLinkV20.0DownloadPostLinkV19.0DownloadPostLinkV18.0DownloadPostLinkV17.0DownloadPostLinkV16.0PostLinkv15.0PostLinkV13.0PostLinkV12.0PostLinkV11.1PostLinkV11.0PostLinkV10.2PostLinkV10.1PostLinkV10.0PostLinkV9.2PostLinkV9.1PostLinkV9.0PostLinkV8.2PostLinkV8.1PostLinkV7.2.1DownloadPostLinkV7.1PostLinkV7.0PostLinkV6.56PostLinkV6.55PostLinkV6.54DownloadPostLink
If you like my work and would like to support me feel free to Donate. Thank you!60
The Toolbox is being marked as a virus?This is likely because the Toolbox (and it's installer) aren't signed with a software license. This freaks Windows out because it sees that there is no publisher, and as a result it displays a warning (smartscreen). In addition, some anti-viruses might also flag the Toolbox as a virus simply because the build is relatively new and there is no record of it in the anti-viruses database, resulting in a false positve.As always, I take your security and privacy VERY seriously! If you do not feel safe with installing the Toolbox due to virus concerns, I respect and support your decision. It is always up to the user and their judgment!
31I'd also like to take the time to acknowledge today as a very special day for this project! Today marks the 3RD YEAR anniversary of the project!!!
It seems like only yesterday, that the first version of the Toolbox was released! It's just crazy to think that it all started in 2019, as a very simple batch file program designed solemnly to remove lock screen ads, and has grown into what it is today! If you're interested in what started it all, I'd highly recommend checking out this post. It dives a little more into the Toolbox's background and it's beginnings!
I just wanted to THANK YOU all from the bottom of my heart for making the last 3 years so memorable! If it wasn't for the amazing support and this wonderful community, the project would've died a long time ago! You guys are the fuel that feeds the Toolbox's development!
Through this project, I've gotten to meet some wonderful people that I'd consider to be good friends:
@Davy49, @Tailborn, @Falcon342, @blaacksheep, and of course you (the one reading this)!
So, where does the Toolbox go from here? Well, I suppose the next step would be to bring the Toolbox to more platforms! Currently, the Toolbox is being ported to other platforms using the Python programming language, and PySimpleGUI. I've also been asked if the Toolbox Python port will ever become open-source, and I think the answer is most likely yes. Big things are planned for the Toolbox this year, and I hope you'll join me on this journey!
HERE'S TO THE TOOLBOX'S 3RD YEAR ANNIVERSARY!!
21What's going on, guys?
I sincerely hope everyone is doing good, and having a wonderful December so far!
Today marks the release of V26.0 of the Toolbox! So, without further ado... let's take a look at what this release has to offer!
Welcome, Welcome, Welcome... Screen!
You know, every time I run a build for the first time I go through the Theme Selector, then the Tour, and then the Welcome Screen. I just think to myself "this is just a mess" - so in this update I thought I'd focus on improving it and making it better. I started by re-designing the Welcome Screen and doing my best to link all three tools into something that looked visually appealing. Now, in a tabbed interface you'll find the Setup Tour in the very first tab, Theme Selection (with a new UI) in the second, Installation Management in the third, and finally in the fourth the Changelog.
Now let's talk specifically about the Installation Management tool. This bad boy now has the ability to read installations from directories other than the default (localappdata\Datastream). So, if you've got your installations in a custom location, and you'd like to manage them, it's now possible to point the path to that location. This should help make managing installations a lot easier!
Custom Launchers on FireOS 7.3.2.2
As some of you may know, I bit the bullet and updated my tablet to the latest version of FireOS... to the dreaded 7.3.2.2. This update, from what I heard, caused the Custom Launcher and disabling OTAs tools to no longer function and after updating, I soon discovered that it was indeed the case. I then tried everything I could think and well really didn't turn up any valuable workarounds... until I tried the method we'd been using on older gen devices... and it worked! Of course, just like on the older gens, it has the drawback of being removed every time the device is rebooted. However, it's the only method I could find, so it's better than nothing, right?
Anyway, while coding it in I decided to take the liberty of also clean up the code, and the UI a bit. What's cool is the tool will now read what generation your tablet is, and display what methods are available to use. You'll also find that the initial method selection UI is a lot more usable compared to its previous iteration.
Change the Timeout for the Display?
Ah, the latest addition to the General group in the Modify System Settings tool. This subtool not only allows you to alter the timeout to traditional values, but also allows you to set a custom timeout. Want your screen to sleep after 24 hours of inactivity? This one's for you folks who want to extend the timeout as much as you can. Just be careful, it may cause a burn-in if your tablet's screen remains on the same screen for too long!
Let's Talk Linux Port Stuff
I guess the point of this section is to ask you guys if you're ok with updates to the VB version being slowed down, so I can focus more on the port? I'd also like to address a common question I get asked about it being open-source. Right now, I'm planning on it being closed-source for now. However, I am planning on making it open-source when I feel like the time is right. Please be patient! So, let's get back to the original question... are you guy's ok if I shift primary focus to the port?
Wait, that's not everything! If you're interested in everything that's changed... please take a look at the changelog below:
Ready to download V26.0? Head on over to the Download's section of the OP. By the way, because of some directory changes to the bin folder... the update will not show up in the Updater. It must be installed via the Installer or extracted from the Portable release.
Ok, my favorite part about of these release posts... sharing appreciation for you awesome folks! I just wanted to say I'm so blessed to be a part of the wonderful community over here on XDA. You guys are incredible people and in fact... this is perhaps the one place I've been on that I don't see negativity or people bullying one another. You guys are just AMAZING and I wanted to let you know that I appreciate everyone's support! Furthermore, you guys are what keep this project going, and it wouldn't be where it is today without you guys! So please pat yourself on the back - you deserve it!
Also, I'd like to place the limelight on my good friends @blaacksheep, and of course @Falcon342. I just can't express how much I appreciate all you've done for this thread! I haven't had the time to get on here because of work and when I come on the forum I see you guys helping out and answering questions. I really do appreciate the time and effort you two have put into being so freaking helpful! However, I've got to be honest, I'm extremely sad because I feel like I'm not doing enough. I'm sure you guys would like a little help (I'm gonna try harder to be more active on here when I can to hopefully help you guys out). Anyway, thank you guys again!! I really do appreciate it!!!!
Also, don't think I forgot about you donators! I just want to say I'm so honored that you'd donate your hard-earned cash. Sometimes I feel like I don't deserve it. Guys and gals, THANK YOU so much for donating! I really do appreciate every penny!
This year has flown by and Christmas is right around the corner, so I just wanted to say MERRY CHRISTMAS and I hope you all had a remarkable 2021! Let's hope 2022 is an even better year!
Well, that's all I've got for now! Have a good one, guys, and until next time... Peace!
20Well, I guess it's finally time to explain myself. You see, ever since Christmas I've been mostly radio silent. Well, this is attributed to Covid running rampant in my parent's household after Christmas. My whole family besides a few were infected (myself included) with the Omicron variant. We are just barely coming out of it, and life is slowly going back to normal. Just wanted to let you guys know where I've been, as I've seen comments (not on this forum) stating that the project is dead, and I've given up on it... that is simply not true. We will press on, and development should start moving forward once more! Again, thank you to @Falcon342, and @blaacksheep for carrying the torch as always! I do appreciate it! - Make sure you uncheck the "Link device to your Amazon account to simplify setup" box before Adding to Cart. (See this screenshot, credits go to @ancientrael)
