JavaSabr
Senior Member
I'm working on resolving the too-smooth issue from v55 and too-bright night shots... stock/v53/v56
General Working GCAM for S23 Ultra
- Thread starter Fl1nt91
- Start date
JavaSabr
Senior Member
LMC much better works with google photo, but you can find it in settings which gallery you want to use
JavaSabr
Senior Member
Have uploaded v56:
Here is a comparison between the S23U V50Sharp and the S23U V56Sharp.
As you can see, the V56 is sharper, but more rushes, if you don't enlarge the photos too far, you don't see it.
Everyone has to decide what is better.
Thank you for the great work.
As you can see, the V56 is sharper, but more rushes, if you don't enlarge the photos too far, you don't see it.
Everyone has to decide what is better.
Thank you for the great work.
Attachments
Could anyone answer how much is dehazed_expo in javas configs.. You can find that setting in lib patcher->Light and Shadows.
it's typical noise reduction behavior, edges are sharp and detailed on v50, too much noise, V56 also has about half the noise but edge definition is lost completely due to denoise
JavaSabr
Senior Member
Sharp is always trade-off, I always use soft version of my config, for me it's the best balance between sharping and not existing sharp artifacts.
Btw, V50 and v56 uses different stacking method, V56 is faster and has less artifacts on moving objects, but V50 is more clean.
JavaSabr
Senior Member
Btw, when someone compare photos between different configs, please note about used mode, HDR+/HDRNet/HDR++ 
Karrouma, dunno why, with a different Gcam app than the one with Sabre config or replacing Sabre config in same app, when I import your xml, image displayed is frozen and taken picture doesn't wok
.Tried new installation again, same issue.
Is there any lib missing? Because I have on my phone all files shared by Sabre (zip), and I just downloaded your xml and I import it.
JavaSabr
Senior Member
Did you Tried a fresh install for lmc r15Karrouma, dunno why, with a different Gcam app than the one with Sabre config or replacing Sabre config in same app, when I import your xml, image displayed is frozen and taken picture doesn't wok
Tried new installation again, same issue.
Is there any lib missing? Because I have on my phone all files shared by Sabre (zip), and I just downloaded your xml and I import it.
JavaSabr
Senior Member
Is there a help file explaining all the settings? Have no idea whatbtgis HDRNet atuff is and all the settings
Similar threads
- Poll
Top Liked Posts
-
There are no posts matching your filters.
-
6Greetings to all!
Uploaded a config update for S23u - MAZAR EXTENDED V3.1 for AGC9.2v7
The config is in many ways a removed version of the previous V3, in which I focused on improving stability in general. Read all the changes, nuances, etc. in the post.
4I have uploaded new my release for s23 ultra and have updated the profile descriptions:
43Greetings to all, friends!
I'm glad to announce the release of a new config for S23u and S24u. I recommend reading all the details, changes and usage notes! The config is suitable for both AGC9.1 and AGC9.2 (latest versions)
-
32New post about my new configs for LMC R16+ for s23
Releases:
-v1 only for ultra:
-v2 for all s23:
-v3 for all s23
-v4 for all s231. Made more strong separating light/shadows styles between LDR button on/off (I prefer LDR on for all scenarios)
2. Updated chroma denoise configuration
3. Minor updates of quality from PRO button for regular s23 in middle/low light
4. Disabled shasta again, I think finally
5. Don't use night mode, use HDR++ for low light scenarios!
-v5 for all s23
-v6 for all s23
-v7 for all s23
-v8 BETA for all s23
New my configs for LMC R17+ for s23
-v1 BETA for all s23
-v2 BETA for all s23
-v3 BETA for all s23
-v4 BETA for all s231. Reverted noise models from SkyyKing007(Finesse King) to use LGV50
2. Continue experimenting with noise reduction configuration
3. Increased ISO limits for selfie camera
4. Updated black levels for x1 in ultra
-v5 for all s23
-v6 for all s23
-v7 for all s23
-v8 for all s23
-v9 for all s23
-v10 for all s23
-v11 for all s23
-v12 for all s23
-v13 for all s23
\Installation instruction:
1. Download and install LMC GCam from this page:
R16:R17:For Samsung devices, we should use packages: scan3d, ruler or aweme.
2. Create folder if not exist by path "Internal Storage/LMC8.4/"
3. Copy my xmls to this folder
4. Hold on the GCam icon and choose "Capture video"
5. Double tap on the space between the shot button and the gallery and then import my config
6. Done
Or video (thanks for @koahhe):
New video by Daniel S
photos.app.goo.gl
UI description:
1. Google Auto White Balance toggle - alternative colors correction
2. Expo toggle - makes images a little bit brighter
3. LDR toggle - makes images more contrast with more deep shadows
4. Sport lense - optimized x1 lense for shooting dynamic objects (especially in HDRe mode)
My telegram group:
32New post about my new configs for AGC 8.8 for s23
Releases for AGC8.8v2:
-v5 only for s23 ultra:
Releases for AGC8.8v4:
-v7 for all s23:
-v8 for s23 ultra:
Releases for AGC8.8v5.1:
-v9 for all s23:
-v11 for s23 ultra:
Releases for AGC8.8v7:
-v14 for all s23:
-v15 for all s23:
-v16 for all s23:
-v17 for all s23:1. Fix merging 30 ZSL frames (v15 still merges only 28)
2. Increase ISO in ZSL for X1 and x0.6
3. Updated black levels for 0.6x and x1 (on ultra)
4. Sport in ZSL has 11-14 frames, in NS - 9
5. Ported sharp settings from my LMC config which has detailed sharp control
6. Updated light configuration for all lenses
7. Updated max iso for Sport profile
8. Revert colors to use system correction from Samsung
9. Remade Vibrant-ZSL to Vibrant-NS
10. Updated noise reduction for 0.6x and 10x lenses
11. Changed metering mode from center weight to matrix
12. Updated AWB profiles
-v18 only for s23 ultra:
-v19 only for s23 ultra:
-v20 only for all s23:
-v26only for base s23:
-v31 only for base s23:
-v33 only for base s23:
-v37 only for base s23:
Installation instruction:
1. Download and install the APK with the package samsung or aweme:
AGC 8.8v2: GCam HUB
AGC 8.8v4: GCam HUB
AGC 8.8v5.1: GCam HUB
AGC 8.8v6: GCam HUB
AGC 8.8v7: GCam HUB
AGC 8.8v8: GCam HUB
2. Download and extract my config to any folder
3. Open AGC -> settings -> configs -> import config -> find and choose my extracted config
4. Load my config from the top menu on the camera viewport.
5. Done.
UI description:
1. Enable/disable Leica mode
2. Enable/disable watermark
3. Switch between image processing modes
4. Enable/disable HDRnet (no any sense, keep disabled)
5. Enable/disable Google Auto White Balance
1. Disable my custom image processing and use Google default
2. Natural image processing optimized for ZSL
3. Vibrant (more contrast and colors) image processing for ZSL
4. Image processing to make darker night photos from night mode
5. HDR universal image processing optimized to use with night mode
6. Optimized night mode to capture dynamic objects for daytime photos.24Hi everyone,
I work on the config for all s23 series.
GCam:
https://1-dontsharethislink.celsoazevedo.com/file/filesc/LMC8.4_R15_ruler.apk
or
https://1-dontsharethislink.celsoazevedo.com/file/filesc/LMC8.4_R15_scan3d.apk
Changes log v33:
1. Disable AWB.
2. Update nose models.
3. Update sharp configuration for 0.6x and 1x cameras.
4. Update noise reduction configuration for 0.6x and 10x cameras.
5. Increase max shot time for hdr++ to have better results in low light.
Changes log v36:
1. Changed HDR models for all lenses to have a better experience when you want to work with RAW
2. Updated sharp configuration to have more clear photos.
3. Updated noise reduction configuration to have good noise balance for low-light shots.
4. Updated configuration for low light shots, to make more real and clear photos.
5. Enabled autoresize photos for x10 lense from 10Mp to 3.7Mp, because it's physics and no any sense to keep more. (but you can easily disable it)
6. Changed pro mode, now it disables limits for ISO and you can take low light shots with short shutter lag. (Especially for dynamic scenes)
7. Reduced saturation of the main camera.
Changes log for v38:
1. Disable downscaling for x10
2. Decreasing chroma noise reduction
3. Updated configuration of photo processing for frontend camera.
4. Small changes for night mode
5. Decreasing color saturation for all cameras.
Changes log for v39:
1. Changed light config for all cameras
2. Changed noise model for the main camera of small s23
3. Changed chroma noise reduction settings
4. Added separated camera module which can be used for 3D panorama with some work round
Changes log for v40:
1. Changed merge method for telephoto from SABRE to Spatial RGB
2. Updated sharping config for all cameras
3. Updated noise model for the main camera of small s23
Changes log for v41:
1. Updated noise configuration for s23 main lense.
2. Increased ISO limit for front camera.
3. Changed behavior of expo compensation from -2 to +1
Changes log for v42 (only ultra):
1. Changed JPG compression
2. Improved chroma noise reduction for the main lense
3. Provided 2 xml configs, classic and more sharper
Changes log for v43 (only ultra):
1. Updated noise models for all rear modules
2. Updated light configuration for all rear modules
3. Updated noise reduction configuration for the main camera
4. Changed expo compensation mode from +1 to -1.6
Changes log for v44 (only ultra):
1. Updated light configuration
2. Minor updates for noise reduction configuration
Changes log for v45 (only ultra):
1. Update noise reduction for all lenses.
2. Minor update light configuration for all lenses.
3. Increase color saturation for the front camera
4. Return shortcut to enable/disable AWB
Changes log for v46 (only ultra):
1. Updated noise reduction for 0.6x and 1x modules
2. Minor updates for light configuration
3. Updated AWB profiles for rear modules
4. Changed expo compensation to +1.2-1.4
Changes log for v47 (only ultra):
1. Small updates for light configuration.
2. Small color correction.
3. Small changes for expo compensation
Changes log for v48 (all s23):
1. Rebalanced noise reduction and details.
2. Updated color correction for all sensors of s23u
3. Updated color saturation for all sensors.
4. Minor changes for light configuration.
5. Adapted v48 for small s23
6. Small other tweeks.
Changes log for v49 (all s23):
1. Changed noise/details balancing for 0.6x
2. Updated light/shadows configuration
3. Updated colors configuration for front camera
4. Fixed auto-focus on face
5. Updated color correction for rear cameras of ultra
6. Changed coefficient expo time/iso to use more long expo time
Changes log for v50 (all s23):
1. Updated front cam configuration
2. Minor updates for color correction of s23u
3. Changed noise reduction for camera viewport
4. Changed contrast configuration for x10 lense
Changes log for v51 (all s23):
1. Hide zoom bar
2. Reverted color correction for s23u to default system
Changes log for v52 (all s23):
1. Updated color correction for s23 ultra.
2. Updated noise reduction config for 0.6x for all s23
3. Increased max expo time for HDR frames from 100 to 150ms for all s23
4. Returned zoom bar for all s23
5. Updated light/shadows configuration for all s23
Changes log for v53 (all s23):
1. Updated color correction for regular s23
2. Reduced max expo time for HDR frames from 150 to 80ms to reduce motion blur.
Changes log for v54 (only ultra):
1. Changed all lenses to use SABRE to have faster processing, less motion artifacts and more details in day light.
2. Updated noise configuration for SABRE
3. Updated front camera config.
4. Added focus tracking bottom in view port (now it works)
Changes log for v54 (only ultra):
1. Changed all lenses to use SABRE to have faster processing, less motion artifacts and more details in day light.
2. Updated noise reducing configuration and sharp for SABRE
3. Updated front camera config.
4. Added focus tracking bottom in view port (now it works)
5. Started using HDRNet as default mode for most cases
6. Increased max ISO for x3 and x10 to work better with HDRNet and low light
7. Changed noise models configuration.
8. Updated reducing chroma noise configuration for x1
9. Hide HDR++ frames count button and use 27 frames for very low light or complex cases.
10. Changed max shasta exp time to produce more clean results in shadows for HDR++
11. How PRO button because now no any need.
12. Fixed artifacts for HDRNet in low light.
13. Updated night mode
Changes log for v55 (all s23):
1. Adapting v54 for small s23
2. Fixed the issue with long HDR++
3. A little bit decrease noise reduction for x1 of s23u.
Changes log for v56 (only for ultra):
1. Rebalancing noise reduction/details
2. Fixed too bright night shots
Changes log for v57 (all s23):
1. Adaption for regular s23
2. Minor updates for light configuration
3. Increased limits to make all lenses a little bit brighter for low light scenes
Changes log for v58 (all s23):
1. Enabled back shasta(Gcam method to improve shadows) after resolving issue with shasta + HDRNet
2. Updated light configuration for all lenses
3. Updated noise reduction config for middle and low light
4. Added LDR button (mode for
weather ) which increases contrast
5. Added PRO button only for regular s23 (to make photos of dynamic objects)
6. Increased a little bit limits for night shots to have a little bit brighter photos
Instruction:
1. Install GCam
2. Extract the attached archive to your root FS
3. Hold on the GCam icon and choose "Capture video"
4. Double tap on the space between the shot button and the gallery and then import my config
5. Done
User interface:
1. HDR++ frames count
2. Google Auto White Balance
3. Expo correction toggle (make all photos brighter)
4. Disable ISO limit to use HDR+ in low light if you don't want to use HDR++
18New post about my new configs for AGC 9.1 for s23
Releases for AGC9.1v13:
-39 only for s23 ultra:
-40 only for s23 base/+:
-41 only for s23 ultra:
Installation instruction:
1. Download and install the APK with the package samsung, ruler or aweme:
AGC 9.1.v13: GCam HUB
2. Download and extract the archive with configs and noise models to any folder
!!!Don't need to additionally import these noise model files!!!
3. Extract configs from the archive to the folder "<internal storage>/Download/AGC.9.1/configs/"
4. Provide file permissions to AGC (it automatically asked about this when you open GCam settings)
5. Load the config: go to profile selector (a button on the top right side of the camera viewport) -> Load Configs -> choose my config
6. Done
Profiles Description:
1. Balanced-LDR - profile in low dynamic range style with balance between image quality and motion artifacts
2. MaxQ-LDR - profile in low dynamic range style with focus on max image quality
3. Astro - profile in low dynamic range style optimized for shots in dark conditions or using Google astro mode
4. Balanced-HDR - profile in high dynamic range style with balance between image quality and motion artifacts, to have maximum HDR need to use night mode even for day shots
5. MaxQ-HDR - profile in high dynamic range style with focus on max image quality, to have maximum HDR need to use night mode even for day shots
6. Sport - profile in low dynamic range style optimized to capture motion objects
Generally, LDR profiles handle better motion and have deeper shadows and better volume than HDR profiles, HDR profiles have brighter shadows and better highlights because use merging frames with different exposures, especially in night mode.
I don't recommend changing Google HDR modes and keeping it to use only HDR+ for fast shots and night mode when you need better dynamic range, but here is the description:
-"No HDR" - uses only 1 frame for the final image
-"HDR+" - captures many frames on the background and merges it to the final image when you press the shot button
-"HDR+ Enhancement" - starts capturing many frames after pressing the shot button and merging it to the final image14Have uploaded the new version:
New posts
-
General Redmagic 9 Pro | 9 Pro Plus (NX769J) 9.0.13 Global EDL ROM- Latest: Oswald Boelcke
-
