Obeid, I wonder if you can help me, my OP 9 pro, no longer has ability to recieve 5G from the time I installed the OS 12, C47 build. Before with the OS 11 I could with by using *#*#4636#*#* key. Any help would be grateful*#*#4636#*#* then Phone Information -> Set preferred network type. Choose :
NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA
Or
NR/LTE/TDSCDMA/GSM/WCDMA
try this first
You need to open from diag mode using qpst and added it in the Carrie policy fileObeid, I wonder if you can help me, my OP 9 pro, no longer has ability to recieve 5G from the time I installed the OS 12, C47 build. Before with the OS 11 I could with by using *#*#4636#*#* key. Any help would be grateful
Hey Obeid, im running oos 12 beta 2 on my 9R. Have you foung a new method to activate volte on A12?You need to open from diag mode using qpst and added it in the Carrie policy file
It worked fine for my on Android 11 using this method here and thank you for that, until the OTA Android 12.47 completely forgot about device will be wiped. But anyhow tried partial root with Magisk(LoadedSuccessfully) and load apk's from there no go, tried file manager also allow "install from unknown sources" no go, still searching around the device is currently on Android 12.47 and another OTA just rolled out again..smh But I did not accept it..1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
Is this possible on non rooted OOS 12?You need to open from diag mode using qpst and added it in the Carrie policy file
On Android 12 *#800# opening feedback mode?1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
Not work on OOS 12You need to open from diag mode using qpst and added it in the Carrie policy file
If you are rooted just install the attached module
Do you know if that works on OOS13 as well?
that module is of no use, it only makes what logkit did appear but it does not enable the Modem...
Hi, any workaround? I'm from indonesia, op7pro oos12.1 , enabled volte toggle, but troubling to access pdc to change mbn profile.anyone from indonesia has tried this?
i tried with profile VOLTE PTCRB and UK VODAFONE it didn't work (LE2120 with global rom installed)
any suggestion?
![]()
Hi, any workaround? I'm from indonesia, op7pro oos12.1 , enabled volte toggle, but troubling to access pdc to change mbn profile.
Hi, could you share how you did it?
*#*#4636#*#* then Phone Information -> Set preferred network type. Choose :Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
latest qpst with pdcFirst of all, apologies for asking such basic questions.
I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
apksFirst of all, apologies for asking such basic questions.
I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
try install latest qualcomm driversThank you so much!
I am still not able to complete the full procedure though.
After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
I used the pdv version in the attachment. Any ideas on why this is happening?