How To Guide working method to enable Volte and Vowifi using PDC (no root)

Search This thread
By:
Advanced…
O

Obeid Allah

Member
Aug 19, 2017
39
18
1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
 
  • Like
Reactions: cproo12, Tekn010933, gualm2 and 7 others
B

bilaloga

New member
Oct 20, 2016
4
0
Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
 
A

Awakensoul

Member
Nov 21, 2007
43
8
Obeid Allah said:
1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
Click to expand...
Click to collapse
First of all, apologies for asking such basic questions.

I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
 
O

Obeid Allah

Member
Aug 19, 2017
39
18
Awakensoul said:
First of all, apologies for asking such basic questions.

I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
Click to expand...
Click to collapse
apks
 

Attachments

  • com.oem.oemlogkit_1.0-1_minAPI28(nodpi)_apkmirror.com.apk
    947.4 KB · Views: 9,210
  • com.android.engineeringmode_V1.01.0.171117173719.25c8842-26_minAPI26(nodpi)_apkmirror.com.apk
    19.6 MB · Views: 14,168
  • Like
Reactions: rcll
O

Obeid Allah

Member
Aug 19, 2017
39
18
Awakensoul said:
First of all, apologies for asking such basic questions.

I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
where do I find th apk's listed on your instructions list?
What version of PDC is needed, I have one installed from 1 year ago is it the same one?
Click to expand...
Click to collapse
latest qpst with pdc
 

Attachments

  • QPST_2.7.496.zip
    60.3 MB · Views: 3,659
  • Like
Reactions: rcll and Samuel Holland
A

Awakensoul

Member
Nov 21, 2007
43
8
Thank you so much!
I am still not able to complete the full procedure though.
After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
I used the pdv version in the attachment. Any ideas on why this is happening?
 
O

Obeid Allah

Member
Aug 19, 2017
39
18
Awakensoul said:
Thank you so much!
I am still not able to complete the full procedure though.
After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
I used the pdv version in the attachment. Any ideas on why this is happening?
Click to expand...
Click to collapse
try install latest qualcomm drivers
 

Attachments

  • drivers.zip
    19.5 MB · Views: 2,258
  • Like
Reactions: rcll
A

Awakensoul

Member
Nov 21, 2007
43
8
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.

Any ideas? Maybe a different profile?
 
Steve0007

Steve0007

Inactive Recognized Developer / Retired Forum Mod
May 10, 2009
5,742
9,032
Paris
OnePlus 8T
OnePlus 9 Pro
Awakensoul said:
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.

Any ideas? Maybe a different profile?
Click to expand...
Click to collapse
Flash the following magisk module
 

Attachments

  • voenabler-v1.8.zip
    4.6 KB · Views: 653
O

Obeid Allah

Member
Aug 19, 2017
39
18
Awakensoul said:
Reinstalling Qualcomm drivers did the trick with PDC recognizing the phone.
I tried to use two different profiles that used to work on my 5 with VODAFONE PORTUGAL, and as such i tried with India-volte-vodafone and with telefonica_uk_Commercial.
None of them gave me working VOLTE with Vodafone Portugal.
For both of them I activated sub0 and then sub1 and confirmed that the status on PDC shows as active, then rebooted but phone is not showing VOLTE enabled. And under the SIM settings the VOLTE switch is enabled.

Any ideas? Maybe a different profile?
Click to expand...
Click to collapse
Try using Vodafone UK volte profile and close the pdc application after activation before restarting
 
P

procent

Senior Member
Jan 29, 2011
57
7
OnePlus 9 Pro
I did everything according to this guide and finally got VoLTE. Thank you.
For me 5G is not working, but I have 4G+ all the time, even during phone calls
 
You must log in or register to reply here.

Similar threads

Steve0007
  • Sticky
How To Guide [GUIDE] [Magisk] [Unlock / ROOT / Keep Root] OOS 14.0.0.202
Replies
3K
Views
428K
Duvel999
Duvel999
mlgmxyysd
How To Guide OnePlus 9 Pro: How to switch between Color OS and Oxygen OS without unlocking the bootloader
Replies
177
Views
93K
S
sahoo56
chandu dyavanapelli
Development [ROM][OOS CAM][OFFICIAL][OnePlus 9 Pro][Android 14]Nameless AOSP[2024/03/09]
Replies
2K
Views
271K
U
unknown_2
mlgmxyysd
How To Guide [Magisk] [ROOT] [9R / 9 / 9 Pro / 9RT] MlgmXyysd's ROOT Toolbox [ColorOS / OxygenOS]
Replies
171
Views
48K
Kerrylee1738$$$
Kerrylee1738$$$
omar302
How To Guide Enable VoLTE and VoWifi on OOS 13 without root
Replies
37
Views
11K
I
Iivanekk

Top Liked Posts

24 Hours All time
  • There are no posts matching your filters.
  • 10
    O
    Obeid Allah
    1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
    2. Open Phone and type *#800# select Engineering Mode
    3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
    4. Reboot
    5. Open settings and enable VOLTE and voWi-fi
    6. Open Phone and type *#801# select Engineering Mode
    7. Switch to full port switch
    8. Open settings and enable debugging by usb mode
    9. adb reboot ftm
    10. adb shell
    11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
    12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
    13. Close PDC
    14. adb reboot
    View
    3
    O
    Obeid Allah
    bilaloga said:
    Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
    Click to expand...
    Click to collapse
    *#*#4636#*#* then Phone Information -> Set preferred network type. Choose :

    NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA

    Or

    NR/LTE/TDSCDMA/GSM/WCDMA

    try this first
    View
    2
    O
    Obeid Allah
    Awakensoul said:
    First of all, apologies for asking such basic questions.

    I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
    where do I find th apk's listed on your instructions list?
    What version of PDC is needed, I have one installed from 1 year ago is it the same one?
    Click to expand...
    Click to collapse
    latest qpst with pdc
    View
    1
    O
    Obeid Allah
    Awakensoul said:
    First of all, apologies for asking such basic questions.

    I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
    where do I find th apk's listed on your instructions list?
    What version of PDC is needed, I have one installed from 1 year ago is it the same one?
    Click to expand...
    Click to collapse
    apks
    View
    1
    O
    Obeid Allah
    Awakensoul said:
    Thank you so much!
    I am still not able to complete the full procedure though.
    After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
    I used the pdv version in the attachment. Any ideas on why this is happening?
    Click to expand...
    Click to collapse
    try install latest qualcomm drivers
    View

New posts