How To Guide working method to enable Volte and Vowifi using PDC (no root)

Search This thread

ko2_wn

Member
Sep 20, 2012
15
4
lampung geh
anyone from indonesia has tried this?
i tried with profile VOLTE PTCRB and UK VODAFONE it didn't work (LE2120 with global rom installed)
any suggestion?

:confused:
 

T@RO

New member
Mar 5, 2022
1
0
*#*#4636#*#* then Phone Information -> Set preferred network type. Choose :

NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA

Or

NR/LTE/TDSCDMA/GSM/WCDMA

try this first
Obeid, I wonder if you can help me, my OP 9 pro, no longer has ability to recieve 5G from the time I installed the OS 12, C47 build. Before with the OS 11 I could with by using *#*#4636#*#* key. Any help would be grateful
 

Obeid Allah

Member
Aug 19, 2017
39
18
Obeid, I wonder if you can help me, my OP 9 pro, no longer has ability to recieve 5G from the time I installed the OS 12, C47 build. Before with the OS 11 I could with by using *#*#4636#*#* key. Any help would be grateful
You need to open from diag mode using qpst and added it in the Carrie policy file
 

zabranjeniples

Senior Member
Feb 10, 2012
59
6
Split
Anyone have any idea for 8T, I try every method, but every time I come to ''choose device in PDC'' step, I cannot see/find device.
I'm not sure where is the problem
 

waldoud

Senior Member
May 30, 2016
73
10
Hello same situtation for one plus o pro volte don´t work in oos 12 stable, please help me
 

Tekn010933

Senior Member
1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
It worked fine for my on Android 11 using this method here and thank you for that, until the OTA Android 12.47 completely forgot about device will be wiped. But anyhow tried partial root with Magisk(LoadedSuccessfully) and load apk's from there no go, tried file manager also allow "install from unknown sources" no go, still searching around the device is currently on Android 12.47 and another OTA just rolled out again..smh But I did not accept it..
Any luck installing apk's would greatly appreciate, searched on xda did not find too much info on this pop-up notification images on conflicting packages.
The method on here worked flawless for me on Android 11, thanks!

OnePlus Pro 9 5G
LE2121 _11_C.47
 

Attachments

  • Screenshot_2022-04-23-09-14-47-03_c31b32364ce19ca8fcd150a417ecce58.jpg
    Screenshot_2022-04-23-09-14-47-03_c31b32364ce19ca8fcd150a417ecce58.jpg
    830.7 KB · Views: 233
  • Screenshot_2022-04-17-15-52-09-28_3d73e98b1ad3bd2575f7a56513d89a0c.jpg
    Screenshot_2022-04-17-15-52-09-28_3d73e98b1ad3bd2575f7a56513d89a0c.jpg
    231.3 KB · Views: 197
  • Screenshot_2022-04-17-15-51-53-77_3d73e98b1ad3bd2575f7a56513d89a0c.jpg
    Screenshot_2022-04-17-15-51-53-77_3d73e98b1ad3bd2575f7a56513d89a0c.jpg
    228.8 KB · Views: 224
  • Screenshot_2022-04-23-09-10-43-41_f7aa348215f5d566f9e4ca860f474209.jpg
    Screenshot_2022-04-23-09-10-43-41_f7aa348215f5d566f9e4ca860f474209.jpg
    322.6 KB · Views: 235

anttaz

Senior Member
1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
2. Open Phone and type *#800# select Engineering Mode
3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
4. Reboot
5. Open settings and enable VOLTE and voWi-fi
6. Open Phone and type *#801# select Engineering Mode
7. Switch to full port switch
8. Open settings and enable debugging by usb mode
9. adb reboot ftm
10. adb shell
11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
13. Close PDC
14. adb reboot
On Android 12 *#800# opening feedback mode?
 

vigorito

Senior Member
Mar 11, 2010
530
13
Is there anything new on Enabling Volte on 9 pro on A12,since tut. from first post is not working anymore
 

Top Liked Posts

  • There are no posts matching your filters.
  • 10
    1. install Logkit v1.0.apk, and Engineering Mode v1.01.0.171117173719.apk
    2. Open Phone and type *#800# select Engineering Mode
    3. Oneplus Logkit ---> Function Switch ---> enable VoLTE, VoWifi и VT
    4. Reboot
    5. Open settings and enable VOLTE and voWi-fi
    6. Open Phone and type *#801# select Engineering Mode
    7. Switch to full port switch
    8. Open settings and enable debugging by usb mode
    9. adb reboot ftm
    10. adb shell
    11. setprop sys.usb.config diag,diag_mdm,qdss,qdss_mdm,serial_cdev,dpl,rmnet,adb
    12. Open PDC and select profile ( sub0 and sub1 then click activate for VoLTE PTCRB for example)
    13. Close PDC
    14. adb reboot
    3
    Thanks that worked perfectly. Do you know how to enable 5G? it doesn't show up in setting as an option
    *#*#4636#*#* then Phone Information -> Set preferred network type. Choose :

    NR/LTE/TDSCDMA/CDMA/EvDo/GSM/WCDMA

    Or

    NR/LTE/TDSCDMA/GSM/WCDMA

    try this first
    2
    First of all, apologies for asking such basic questions.

    I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
    where do I find th apk's listed on your instructions list?
    What version of PDC is needed, I have one installed from 1 year ago is it the same one?
    latest qpst with pdc
    1
    First of all, apologies for asking such basic questions.

    I have done something similar to this procedure on a 5 and a 6 previously, but now I am the proud owner of a 9 pro europe variant and would like to enable VOLTE as per your instructions.
    where do I find th apk's listed on your instructions list?
    What version of PDC is needed, I have one installed from 1 year ago is it the same one?
    apks
    1
    Thank you so much!
    I am still not able to complete the full procedure though.
    After step 11, the shell accepts the command but when I load pdc the phone does not show up in pdc.
    I used the pdv version in the attachment. Any ideas on why this is happening?
    try install latest qualcomm drivers