Would it be possible to recover my files via download mode? My phone is using ZVG.

[chrisyroid]

Well. my phone has the boot loop problem. I was able to get my phone to boot by using the freezer method but not on long enough to recover anything. After a bit of googling I discovered this method: https://forum.xda-developers.com/g4/help/data-recovery-via-download-mode-t3306047 which states that it may be possiable to recover my files via download mode. I tried doing this but discovered that I couldn't flash anything because anything I flashed was too old. I was wondering if anyone has been able to successfully been able to connect using Send_Command on ZVG.

 

[steadfasterX]

Well. my phone has the boot loop problem. I was able to get my phone to boot by using the freezer method but not on long enough to recover anything. After a bit of googling I discovered this method: https://forum.xda-developers.com/g4/help/data-recovery-via-download-mode-t3306047 which states that it may be possiable to recover my files via download mode. I tried doing this but discovered that I couldn't flash anything because anything I flashed was too old. I was wondering if anyone has been able to successfully been able to connect using Send_Command on ZVG.

You can.. Without send_command.exe though.
I discovered this while my unlocking attempts...


Read on here:
https://forum.xda-developers.com/g4/help/tutorial-backup-download-mode-t3659223

.


Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

I'm getting these errors when I try and run it.

After a little fiddling around with the connection I got to the point where the connection wouldn't time out but instead the progress bar on download mode flashes and now I get this:

 

[steadfasterX]

I'm getting these errors when I try and run it.


After a little fiddling around with the connection I got to the point where the connection wouldn't time out but instead the progress bar on download mode flashes and now I get this:

ZVG is android MM right?

I forgot sudo in the command..

Try this while in lglaf folder in the terminal:
sudo su -
(you get asked for the FWUL password)
Then do the extraction command again



.



Sent from my LG-H815 using XDA Labs

 

[TheMadScientist]

ZVG is android MM right?

I forgot sudo in the command..

Try this while in lglaf folder in the terminal:
sudo su -
(you get asked for the FWUL password)
Then do the extraction command again


Yes zvg is mm
.



Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

Still getting the errors in picture 2.

 

[steadfasterX]

Still getting the errors in picture 2.

Is just noticed that you mistyped the path. The path must start with a /



.

Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

Is just noticed that you mistyped the path. The path must start with a /

Still didn't work.

 

[steadfasterX]

Still didn't work.

Hm. Same error message or is it somehow different?

Try also this:

In FWUL open the LG folder and double click the "without auth" icon.

You should see a prompt

Type:
uname -a

Paste the output.

There is a screenshot maker included in FWUL check the OP screenshots for a how-to use and upload

Then do the same again but this time double click the icon "with auth"

Also share that output.


Are you available for a remote session tomorrow?


.

Sent from my LG-H815 using XDA Labs

 

[TheMadScientist]

Now is this throught the send command?
lg and sprint closed it on MM and there is a procedure to open it back up.

 

[TheMadScientist]

Hm. Same error message or is it somehow different?

Try also this:

In FWUL open the LG folder and double click the "without auth" icon.

You should see a prompt

Type:
uname -a

Paste the output.

There is a screenshot maker included in FWUL check the OP screenshots for a how-to use and upload

Then do the same again but this time double click the icon "with auth"

Also share that output.


Are you available for a remote session tomorrow?


.

Sent from my LG-H815 using XDA Labs

sorry forgot to quote. see post above.

 

[steadfasterX]

Now is this throught the send command?
lg and sprint closed it on MM and there is a procedure to open it back up.

No need for sendcommand I use a another tool which fixes that for MM as well..



.

Sent from my LG-H815 using XDA Labs

 

[TheMadScientist]

No need for sendcommand I use a another tool which fixes that for MM as well..



.

Sent from my LG-H815 using XDA Labs

Lol ok I have seen loads of peoples have the closed port issue.
Just tossing in my 1 cent worth of useless info.

 

[steadfasterX]

Lol ok I have seen loads of peoples have the closed port issue.
Just tossing in my 1 cent worth of useless info.

Lol np mate



.

Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

uname -a outputs this:
Linux fwul 4.10.13-1-ARCH #1 SMP PREEMPT Thu Apr 27 12:15:09 CEST 2017 x86_64 GNU/Linux

Not sure what you mean by

Then do the same again but this time double click the icon "with auth"

 

[steadfasterX]

uname -a outputs this:
Linux fwul 4.10.13-1-ARCH #1 SMP PREEMPT Thu Apr 27 12:15:09 CEST 2017 x86_64 GNU/Linux

Not sure what you mean by

You found the LG folder on the desktop?

Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

You found the LG folder on the desktop?

Sent from my LG-H815 using XDA Labs

Oops. LOL. Okay. I got it. The result is this:
Linux localhost 3.10.84-gf19a482-00038-gabd71a3 #1 SMP PREEMPT Thu May 25 09:16:51 KST 2017 aarch64

 

[steadfasterX]

Oops. LOL. Okay. I got it. The result is this:
Linux localhost 3.10.84-gf19a482-00038-gabd71a3 #1 SMP PREEMPT Thu May 25 09:16:51 KST 2017 aarch64

Lol

Of what?

With or without auth icon?

Sent from my LG-H815 using XDA Labs

 

[chrisyroid]

Lol

Of what?

With or without auth icon?

Sent from my LG-H815 using XDA Labs

With.

 

[steadfasterX]

With.

Are you available for a remote session tomorrow?



.

Sent from my LG-H815 using XDA Labs