• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!

General X7 MAX and GT NEO FLASH/UBRICK INSTRUCTIONS

Search This thread

mahotlov

Member
Dec 6, 2009
28
46
Nalchik
X7 MAX and GT NEO FLASH/UBRICK

CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)

BACKUP



Please read all the information before proceeding.

1) In Developer options need turn "ON", "OEM unlock" and USB Debug.

2) Unlock your bootloader.

-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
1.png
2.png
3.png


We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
4.jpg


The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.

Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.

Click " Start deep testing”

3) Disable Driver Signature Enforcement in Windows 10: Video tutorial

4) Download all utilites and unpack: Programms and Drivers

5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)

Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)

6) Install VCOM drivers and libusb

7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire

8) In Download Agent choose MTK_AllInOne_DA.bin

9)
GO options-->Connections--> choose UART and Band rate: 921600

10) Choose Download Only mode
and check all the boxes.

11)
Power OFF Phone and unplag usb cable

12) Open"
MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"

13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!

After connect usb cable in MTKAuthBypassTool_V6 you can see this:

111.png


14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port

15) After this message click "DOWNLOAD" in FlashTools

(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)

16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery


The first download is long, we are waiting from 5 to 10 minutes.


19) LOCK BOOTLOADER AGAIN

This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work

- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.

Done. Congratulations. You have stock clean firmwire with OTA and full work services!


IF YOU WANT FLASH WITH LOCK BOOTLOADER

Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg


IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12

ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
 
Last edited:
Jul 18, 2021
7
0
Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you
 

Attachments

  • IMG_20210922_112352.jpg
    IMG_20210922_112352.jpg
    183.6 KB · Views: 84
X7 MAX and GT NEO FLASH/UBRICK

CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)

BACKUP


1) In Developer options need turn "ON", "OEM unlock" and USB Debug.

2) Unlock your bootloader.

-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899

We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901

The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.

Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.

Click " Start deep testing”

3) Disable Driver Signature Enforcement in Windows 10: Video tutorial

4) Download all utilites and unpack: Programms and Drivers

5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)

Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)

6) Install VCOM drivers and libusb

7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire

8) In Download Agent choose MTK_AllInOne_DA.bin

9)
GO options-->Connections--> choose UART and Band rate: 921600

10) Choose Download Only mode
and check all the boxes.

11)
Power OFF Phone and unplag usb cable

12) Open"
MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"

13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!

After connect usb cable in MTKAuthBypassTool_V6 you can see this:

View attachment 5415903

14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port

15) After this message click "DOWNLOAD" in FlashTools

(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)

16) Unplag USB cable and turn ON phone.

The first download is long, we are waiting from 5 to 10 minutes. Has it started?

I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.

Launching RECOVERY.bat in the "Unlock Bootloader"folder.


17) LOCK BOOTLOADER AGAIN

This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work

- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.

Done. Congratulations. You have stock clean firmwire with OTA and full work services!


IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12

ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?
 
Update:
Im able to change my GT Neo ROM to Indian Variant. Thank you so much sir!

Experience:
Instruction #13-#15 are quite tricky.

Issues Encountered:
- my windows pc cannot detect the mediatek com port
- proper timing of clicking DOWNLOAD on SP Flash Tool


How i manage to proceed on SP FT Download:
- first turn off phone (assuming below instructions are DONE -> How i fixed (to detect):)
- SP Flash Tool needed Configs are Done (just waiting for the Downlolad to be clicked)
- MTK Bypass (Administration) is waiting for device
- after SUCCESS MESSAGE on MTK Bypass, immediately click on Download (SP FT)
- once download is started, you can unhold VOL - & + wait to be finished

How i fixed (to detect):
-
downloaded this mediatek vcom drivers -> https://www.thecustomdroid.com/mediatek-preloader-usb-vcom-drivers/
- there are some popup that appear (i forgot to remember), i just clicked yes
- then restart pc
- turn off device
- open LIBUSB Filter device (Goal is to detect "Mediatek xxxxx yyyyy zzzzz" usb device on the list)
- Hold VOL - & VOL + AND PLUG Type C Cable
- Check the LIBUSB Filter list and once you see any "MEDIATEK ZZZZZ XXX" click and install
- once success, you can go to -> How i manage to proceed on SP FT Download:



Hope that helps! Thank you .
 

MahiSingh083

Member
Feb 26, 2014
13
1
Kanpur
X7 MAX and GT NEO FLASH/UBRICK

CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)

BACKUP


1) In Developer options need turn "ON", "OEM unlock" and USB Debug.

2) Unlock your bootloader.

-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899

We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901

The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.

Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.

Click " Start deep testing”

3) Disable Driver Signature Enforcement in Windows 10: Video tutorial

4) Download all utilites and unpack: Programms and Drivers

5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)

Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)

6) Install VCOM drivers and libusb

7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire

8) In Download Agent choose MTK_AllInOne_DA.bin

9)
GO options-->Connections--> choose UART and Band rate: 921600

10) Choose Download Only mode
and check all the boxes.

11)
Power OFF Phone and unplag usb cable

12) Open"
MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"

13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!

After connect usb cable in MTKAuthBypassTool_V6 you can see this:

View attachment 5415903

14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port

15) After this message click "DOWNLOAD" in FlashTools

(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)

16) Unplag USB cable and turn ON phone.

The first download is long, we are waiting from 5 to 10 minutes. Has it started?

I recommend doing a full data reset.
If the device does not start after a long wait and reboots itself or freezes (rarely, but it is possible), go to Recovery and make Format Data.
How do load in Recovery? Press VOL - and the ON buttons, the phone will switch to fastboot mode.

Launching RECOVERY.bat in the "Unlock Bootloader"folder.


17) LOCK BOOTLOADER AGAIN

This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work

- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.

Done. Congratulations. You have stock clean firmwire with OTA and full work services!


IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12

ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
Error.png



Following your instruction properly.. but still getting this error while flashing.
@mahotlov please take a look into this.
 

TeckySairam

Member
Aug 26, 2021
11
1
Guys, i have a doubt i am gonna buy this phone like in a week so when u buy the phone does it come with latest update (a.18) or it comes with a.15 y am asking is becoz in a.16,17,18 to many bugs so only anyone reply me
 

abidrockzx

New member
Jun 24, 2018
2
0
Realme X7 Max 5G
X7 MAX and GT NEO FLASH/UBRICK

CONVERT GT NEO/GT NEO FE to X7 MAX
(and vice versa)

BACKUP



Please read all the information before proceeding.

1) In Developer options need turn "ON", "OEM unlock" and USB Debug.

2) Unlock your bootloader.

-Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
- Run.
Then follow the screenshots.
View attachment 5415895View attachment 5415897View attachment 5415899

We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
You can exit the app and log in later to check the status.
View attachment 5415901

The device itself should reboot into fastboot mode.
You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
and select"Android Bootloader Interface" from the list. Done.

Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
After that, we run FASTBOOT REBOOT.bat
This restart will delete all user data.
Then turn off the phone. Disconnect the USB cable.

Click " Start deep testing”

3) Disable Driver Signature Enforcement in Windows 10: Video tutorial

4) Download all utilites and unpack: Programms and Drivers

5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)

Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)

6) Install VCOM drivers and libusb

7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire

8) In Download Agent choose MTK_AllInOne_DA.bin

9)
GO options-->Connections--> choose UART and Band rate: 921600

10) Choose Download Only mode
and check all the boxes.

11)
Power OFF Phone and unplag usb cable

12) Open"
MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"

13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!

After connect usb cable in MTKAuthBypassTool_V6 you can see this:

View attachment 5415903

14) Fastest Check options-->Connections--> UART and Band rate: 921600,
choose MediaTek USB Port Com port

15) After this message click "DOWNLOAD" in FlashTools

(if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)

16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
18) Format Data in Recovery


The first download is long, we are waiting from 5 to 10 minutes.


19) LOCK BOOTLOADER AGAIN

This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work

- Turn off the phone.
- Hold the VOL-and the power button. We enter the Fastboot mode.
- Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
- After launching FASTBOOT REBOOT.bat
The phone will reboot itself.

Done. Congratulations. You have stock clean firmwire with OTA and full work services!


IF YOU WANT FLASH WITH LOCK BOOTLOADER

Skip the STEPS for unlocking and blocking the bootloder.
Uncheck boxes in SP FlashTools from:
opporeserve2
cdt_engineering
md1mg


IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
- You must do this before stage 12
- After install libusb you will see a folder "lib-usb" in the START menu
- Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
-When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
-In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
- Turn off the phone. Disconnect the cord.
- Your port problems must be lost
- Go Step 12

ABOUT BACKUP!
- If you wnat make Backup your Phone, follow steps 7-14
- After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
- Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
- DONE.
as i have x7 max(INDIA) , can i install realme gt neo deep testing apk and unlock its bootloader and after flashing the firmware can i get backk to the locked bootloader state ?? through your.bat file or i"ll get stuck on image destroyed page ??
 

Top Liked Posts

  • There are no posts matching your filters.
  • 8
    X7 MAX and GT NEO FLASH/UBRICK

    CONVERT GT NEO/GT NEO FE to X7 MAX
    (and vice versa)

    BACKUP



    Please read all the information before proceeding.

    1) In Developer options need turn "ON", "OEM unlock" and USB Debug.

    2) Unlock your bootloader.

    -Save the DeepTesting. apk application on the phone and run it. (there are two versions in the archive for GT NEO and GT NEO FE)
    - Run.
    Then follow the screenshots.
    1.png
    2.png
    3.png


    We are waiting. After about 15-60 minutes (or more), the unlock tool will show the status of the unlock request. If it shows that the unlock was successful (as in the screenshot below), we proceed to the next step.
    You can exit the app and log in later to check the status.
    4.jpg


    The device itself should reboot into fastboot mode.
    You should have ADB drivers installed, if there are none, then you will see an Android device in the device manager.
    The ADB drivers are in the "Programs and Drivers" folder at the links above, unpack and install them manually.
    Click on "Android", then "driver", then "update driver". Next, " Find drivers on this PC (search and install the driver manually)".
    Next, "Select a driver from the list of available ones", then "Show all devices" (this item may remain), then "install from disk", search for our adb drivers folder, click on " android_winusb. inf "
    and select"Android Bootloader Interface" from the list. Done.

    Next, run BL UNLOCK.bat from the folder "Unlock Bootloader", Read the instructions in the bat file, press any key. We look at the phone. Confirm Unlcok.
    After that, we run FASTBOOT REBOOT.bat
    This restart will delete all user data.
    Then turn off the phone. Disconnect the USB cable.

    Click " Start deep testing”

    3) Disable Driver Signature Enforcement in Windows 10: Video tutorial

    4) Download all utilites and unpack: Programms and Drivers

    5) Download A27 (GT_NEO) firmwire and unpack: A27 Firmwire for FTools (MEGA); A27 Firmwire for FTools (GDrive)

    Download A15 (X7_MAX) firmwire and unpack: A15 Firmwire for FTools (MEGA); A15 Firmwire for FTools (GDrive)

    6) Install VCOM drivers and libusb

    7) Open flash_tool.exe and choose MT6893_Android_scatter.txt from unpacked firmwire

    8) In Download Agent choose MTK_AllInOne_DA.bin

    9)
    GO options-->Connections--> choose UART and Band rate: 921600

    10) Choose Download Only mode
    and check all the boxes.

    11)
    Power OFF Phone and unplag usb cable

    12) Open"
    MTKAuthBypassTool_V6" (mtksecbypass.exe) with administrator rights. Click on "Disable Auth"

    13) Hold VOL+ and VOL- and Connect Usb cable. Now you must see in device manager Com port MediaTek USB Port_V1632. If you see MediaTek port, unhold VOL buttons. Remember the port number!

    After connect usb cable in MTKAuthBypassTool_V6 you can see this:

    111.png


    14) Fastest Check options-->Connections--> UART and Band rate: 921600,
    choose MediaTek USB Port Com port

    15) After this message click "DOWNLOAD" in FlashTools

    (if you are slow and an error appears, you must repeat the procedure from step "11". Do not close the FlashTools program so that the port settings and port speed do not get lost.)

    16) Unplag USB cable. Dont turn ON phone! Go Fastboot mode ( Hold VOL- and Power button)
    17) Launching RECOVERY.bat in the "Unlock Bootloader"folder.
    18) Format Data in Recovery


    The first download is long, we are waiting from 5 to 10 minutes.


    19) LOCK BOOTLOADER AGAIN

    This stage is necessary in order for the device to become certified and certain services (Gpay, etc.) to work

    - Turn off the phone.
    - Hold the VOL-and the power button. We enter the Fastboot mode.
    - Launch BL LOCK.bat from the “Unlock Bootloader " folder. Follow the instructions in the bat
    - After launching FASTBOOT REBOOT.bat
    The phone will reboot itself.

    Done. Congratulations. You have stock clean firmwire with OTA and full work services!


    IF YOU WANT FLASH WITH LOCK BOOTLOADER

    Skip the STEPS for unlocking and blocking the bootloder.
    Uncheck boxes in SP FlashTools from:
    opporeserve2
    cdt_engineering
    md1mg


    IF YOU HAVE PROBLEM WITH THE COM PORT OR ERROR IN MTKAuthBypassTool_V6
    - You must do this before stage 12
    - After install libusb you will see a folder "lib-usb" in the START menu
    - Launch the "Filter Wizard" (select "Install a device filter" and see a window with devices.
    -When the phone is turned off, press the VOL+ and VOL-keys and connect the USB cord. Once the port has been determined, release the volume keys after a couple of seconds.
    -In the Filter Wizard window, we quickly catch MediaTek USB Port_V1632 and click Install. We act quickly. There should be a response from the program that everything is success and the phone will reboot.
    - Turn off the phone. Disconnect the cord.
    - Your port problems must be lost
    - Go Step 12

    ABOUT BACKUP!
    - If you wnat make Backup your Phone, follow steps 7-14
    - After message from "MTKAuthBypassTool_V6" Go to the “ReadBack " tab in FlashTools and check the boxes everywhere and quickly click on " Read Back”
    - Your BackUP data it will be saved in the SP FLASH TOOLS folder as ROM_1, ROM_2 etc
    - DONE.
    2
    Update:
    Im able to change my GT Neo ROM to Indian Variant. Thank you so much sir!

    Experience:
    Instruction #13-#15 are quite tricky.

    Issues Encountered:
    - my windows pc cannot detect the mediatek com port
    - proper timing of clicking DOWNLOAD on SP Flash Tool


    How i manage to proceed on SP FT Download:
    - first turn off phone (assuming below instructions are DONE -> How i fixed (to detect):)
    - SP Flash Tool needed Configs are Done (just waiting for the Downlolad to be clicked)
    - MTK Bypass (Administration) is waiting for device
    - after SUCCESS MESSAGE on MTK Bypass, immediately click on Download (SP FT)
    - once download is started, you can unhold VOL - & + wait to be finished

    How i fixed (to detect):
    -
    downloaded this mediatek vcom drivers -> https://www.thecustomdroid.com/mediatek-preloader-usb-vcom-drivers/
    - there are some popup that appear (i forgot to remember), i just clicked yes
    - then restart pc
    - turn off device
    - open LIBUSB Filter device (Goal is to detect "Mediatek xxxxx yyyyy zzzzz" usb device on the list)
    - Hold VOL - & VOL + AND PLUG Type C Cable
    - Check the LIBUSB Filter list and once you see any "MEDIATEK ZZZZZ XXX" click and install
    - once success, you can go to -> How i manage to proceed on SP FT Download:



    Hope that helps! Thank you .
    1
    Question #1. I'm having currently an unlocked bootloader, and custom GSI installed (GT Neo). Do i need another instructions to do?
    No. dont lock, firstly flash Firmwire
    1
    Hi please can you provide files for Realme GT Neo Flash Edition (FE) as it has the latest firmware A.11. You provided files for only GT Neo and X7 Max. Find attached a screenshot showing the current GT Neo Flash Edition Firmware. Thank you
    You can use firmware for Gt Neo or X7 Max (better) for FE ver. phone