XDABBEB's VS980 v3.1.2

[jrk190]

Anyone managed to get Android pay to work on this?

 

[raiderj]

Great ROM! Feels like a new phone

I've been ready to just about ditch my LG G2. Have issues with Bluetooth dropping out, and thinking it's about time for a new phone. Decided to try this ROM, and it's great! Had to update my TWRP, bootstack to 39A, then install this ROM and also added in the custom ZIP too. Feels like a brand-new phone! My battery life is much better too. Well over a solid day of battery life, assuming casual use.

Thanks XDABBEB!

 

[iidiir]

Hello,
I want to know what is the defaut dpi just after installing the rom, whithout passing by the Path

THank you

 

[RonReagan]

APN

Just wondering if it's the ROM (been on latest version for years), but can others go to your mobile network APN settings and have the option to add a new APN? I only have reset to default and was just wondering is it just me. Thanks in advance.

Edit: If you can't either, is there a ROM that features the ability to?

 

[terminal13]

Never mind.

Sent from my VS985 4G using Tapatalk

 

[Raeehn]

I'm currently running CM12.1 ROM, what do i do to get your ROM?

do i have to downgrade to stock kitkat then root and Update? or what? im lost..

 

[JD33]

I'm currently running CM12.1 ROM, what do i do to get your ROM?

do i have to downgrade to stock kitkat then root and Update? or what? im lost..

Follow to the steps "How to Install" in the main post.

1. Create Nandroid backup
2. Flash 39A Bootstack - Here
3. Wipe data/cache within twrp. You should leave internal storage alone. If you fail perform this step and have any issues while running the firmware, start this whole install process again and follow this step before posting.
4. Flash the latest firmware version below (XDABBEB's VS980 3.1.2) after verifying the md5.
4a. Optional - flash "My Patch" or Add-ons. Add them to queue AFTER firmware, not before.

 

[Raeehn]

Ok so i followed the instructions and when i rebooted i got the LG logo and a blinking light....its been like this for a couple minutes, is this normal?

---------- Post added at 06:57 PM ---------- Previous post was at 06:05 PM ----------

Ok, so it booted up normally, thank god.

However im haaving a big problem with the "BACK" and "EXIT" button as they aren't responding to my touch.....wasn't happening before i flashed so how can i fix this?

im guessing the "patch" that i flashed last has a custom smaller button bar??? how can i get the original size of the button bar back??

 

[JD33]

Ok so i followed the instructions and when i rebooted i got the LG logo and a blinking light....its been like this for a couple minutes, is this normal?

---------- Post added at 06:57 PM ---------- Previous post was at 06:05 PM ----------

Ok, so it booted up normally, thank god.

However im haaving a big problem with the "BACK" and "EXIT" button as they aren't responding to my touch.....wasn't happening before i flashed so how can i fix this?

im guessing the "patch" that i flashed last has a custom smaller button bar??? how can i get the original size of the button bar back??

Yes the "My Patch" has a smaller navbar.

My Patch - This is a zip I flash on my phone after the main install. It sets the default system dpi to 424, installs the 30dpi navbar and changes the status and navigation bars (centered clock, LP icons, battery percentage to right if on).

If you want a bigger navbar download and flash a higher dpi zip in the "Add-ons" section. The other option is to restart the flashing process completely but dont flash any add-on zips or the My patch zip, only flash the firmware.

 

[Raeehn]

So I just need to download one from the "add-ons", go back to recovery and flash it, right? Do I need to wipe cache and all that?

 

[JD33]

So I just need to download one from the "add-ons", go back to recovery and flash it, right? Do I need to wipe cache and all that?

Yea, you can just wipe the cache. If you have any issues after repeat the flashing process from the beginning (re-follow the steps) and only flash the firmware, no add-ons or my patch zip.

 

[Raeehn]

Just did as you said, seems like the new nav bar works fine. Thanks

 

[Raeehn]

I've noticed that this fw does drain battery quite . is there a fix for that?

 

[JD33]

I've noticed that this fw does drain battery quite . is there a fix for that?

I've always had good battery life when using this ROM. Maybe try disabling pre-installed apps you don't use or try the Greenify app and see if it helps.

 

[TQOS]

!!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
!!! I AM NOT RESPONSIBLE FOR ANY PROBLEMS THAT OCCUR WHILE INSTALLING/USING THIS !!!


Please follow the XDA rules. This is a development thread, not a Q & A or opinion thread. If your post isn't related directly to development (within reason), it will be ignored and/or reported to the moderators. Speculation/flaming/attacks/rants will not be tolerated.

Features:



How to Install:



Changelog:



Downloads:



Thanks:



Before posting about any issues, make sure that you have followed the install directions explicitly (including wiping data and NOT restoring backed-up data). If you are using a 3rd-party kernel, you must revert to the included kernel first. You must provide DETAILED steps to reproduce the issue along with a log if appropriate or your post will be ignored/moved/deleted/etc. If you don't know how to get a log, HERE is a good tutorial. There is also an excellent app available on the Play Store called SysLog that you can use on your phone.

Devs: I will provide flashable zips or tutorials for any included apps/modifications that I intend to share. I do not authorize anything else to be shared, used or uploaded elsewhere.

XDA:DevDB Information
XDABBEB's VS980, ROM for the Verizon LG G2

Contributors
xdabbeb
ROM OS Version: 5.0.x Lollipop
ROM Kernel: Linux 3.4.x
Based On: Stock

Version Information
Status: Stable
Current Stable Version: 3.1.2
Stable Release Date: 2014-04-12

Created 2014-04-12
Last Updated 2016-02-13

Hello. I'm installed on VS980 and all very good working. It`s AWESOME!!!
Because, later I flashed cloudyg2 3.3(can't enable usb debugging), cyanogen CM12(crashed apps) and CM13 and was some bugs.
Thank YOU and GOOD LUCK!

 

[muhammad suleman]

HELP

Links are not working please someone post the working links . I really need this rom badly.
Thanks

 

[blacklist3d]

Links are not working please someone post the working links . I really need this rom badly.
Thanks

Download link is working perfectly, check again.

 

[xddd00]

Hi.

I've got a almost three dead zones across the screen so I'm using it with mini view option but sometimes I have to use it full screen and going back to mini view, is there any way of making a shortcut for this instead of swipe navigation buttons? Most of the time it's very annoying

 

[Mariner_1712]

So my phone just lost wifi. It's in a state of constantly trying to turn on wifi but can't

 

[gjbwj]

Is it right way to flash this ROM from 24A

I am current on 24A, cloudy2.2, kitkat 4.4. I am thinking to flash this ROM. Am I right to go this route:

Back up >> recovery >> flash 39A or (need go to 26A first) >> recovery >> flash 12B bootloader ? >> recovery >> flash this ROM >> flash G-apps ?

Thank you !

!!! PLEASE READ THIS ENTIRE POST BEFORE PROCEEDING !!!
!!! I AM NOT RESPONSIBLE FOR ANY PROBLEMS THAT OCCUR WHILE INSTALLING/USING THIS !!!