Xiaomi Hard Brick, Can't enter Fastboot mode

[nikai]

Hi,
I flashed a wrong boot.img via fastboot, and done reboot.
Now the phone stuck in bootloop with no screen at all. no mi logo, just black screen (vibrate when it try to boot).

- Phone is Xiaomi Redmi 6, battery is not removable.
- Can't enter to fastboot mode (not either to TWRP recovery).
- Can't even turn the phone off (tried with pow + vol-up + vol-down, but didn't work).
- PC not recognize the phone (included miFlash and spFlashtool).

I have an unlocked bootloader if it make any different to this situation.
Please help :crying:
Thanks.

If need more details I would like to give it.

 

[mrmazak]

Hi,
I flashed a wrong boot.img via fastboot, and done reboot.
Now the phone stuck in bootloop with no screen at all. no mi logo, just black screen (vibrate when it try to boot).

- Phone is Xiaomi Redmi 6, battery is not removable.
- Can't enter to fastboot mode (not either to TWRP recovery).
- Can't even turn the phone off (tried with pow + vol-up + vol-down, but didn't work).
- PC not recognize the phone (included miFlash and spFlashtool).

I have an unlocked bootloader if it make any different to this situation.
Please help :crying:
Thanks.

If need more details I would like to give it.

try this. It worked for me when I had a simular issue.

set spflash tool up to flash correct boot.img. Press start.

Connect phone while holding the volume down button. Keep holding button. The phone is bootlooping, so it may eventually catch in preloader and get flashed.

 

[nikai]

try this. It worked for me when I had a simular issue.

set spflash tool up to flash correct boot.img. Press start.

Connect phone while holding the volume down button. Keep holding button. The phone is bootlooping, so it may eventually catch in preloader and get flashed.

Thanks, but I'm get the same error, STATUS_BROM_CMD_FAIL (0xC0060005)

 

[denimajidt]

same problem with me..haha :laugh:

 

[Tommy0412]

folow these steps
the only way you flash your phone is by installing mtk (mediatek) drivers.
if you are using windows 10. Disable Driver Signature Enforcement
download MRT_V3.26
there you have MTK_driver.exe install it. than open folder MTK_CDC_Driver_for_imei right click on Android_Gadget_CDC_driver and install.
download Xiaomi_Flash_20181115.zip
and stable global fastboot rom V10.3.3.0.OCGMIXM
extract it
run mi flash and choose extracted folder, click refresh than flash.
THIS IS 100% TESTED by me.

 

[TanRayCz]

try this. It worked for me when I had a simular issue.

set spflash tool up to flash correct boot.img. Press start.

Connect phone while holding the volume down button. Keep holding button. The phone is bootlooping, so it may eventually catch in preloader and get flashed.

Where can i get scatter file from?

edit: nevermind, found it, tried to flash boot.img but it never did anything

 

[samusamu2304]

same

i have the same problem but with a redmi 6A, its stuck on a bootloop with the "the system has been destroyed" screen and unable to boot into fastboot, i alredy tried setting up sp flash and connecting the device pressing the vol+ button, but i always get the "STATUS_BROM_CMD_FAIL (0xC0060005)" error and i cant find anything about it.

 

[Pradeep1998]

https://forum.xda-developers.com/re...rick-stuck-da-mode-authorised-t4000433/page24 try this and let me know if its working for you guys also

 

[Akash23q2]

Deleted

 

[Immortal68]

https://forum.xda-developers.com/re...rick-stuck-da-mode-authorised-t4000433/page24 try this and let me know if its working for you guys also

The workaround doesn't support MT6762, which is the processor in the R6, sadly.

 

[adhilfuad]

The workaround doesn't support MT6762, which is the processor in the R6, sadly.

MT6765 supported and in Redmi 6

 

[BTS Arm]

I Have A Problem That My Redmi Note 9 Is Struck On BootLoop It's Not Entering Recovery And Fastboot Mode Also It's Just Showing Redmi Logo Only How To Fix It Any One Help Me Plzzz....