Question Xiaoxin Lenovo TB J607F Rom/Firmware

Search This thread

franper00

New member
Jan 12, 2022
4
3
Hi everyone.
Hi bought this Tablet Xiaonxin Lenovo J607F and I try to change the Rom with a Global Rom but unlikely in the process of do it, i brick the tablet. I would like to re-install the same ROM. Everyone have the rom for the Lenovo TB-J607F?

Thanks
 

franper00

New member
Jan 12, 2022
4
3
in this list there is not the firmware/rom for the J607F. I can only found the J607Z which is different because the tablet is with a SIM card support.
 

robhiro

New member
Nov 5, 2017
1
0
Does anybody know if we can use the TB-607Z firmware in the TB-607F? I want to use the global rom so badly.
 

franper00

New member
Jan 12, 2022
4
3
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:


2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.

Hope I helped a lot of people with this problem.
Thanks
 

whynot4444

Senior Member
May 27, 2012
266
30
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:


2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.

Hope I helped a lot of people with this problem.
Thanks
this link is dead bro
 

Asenjo97

New member
Jan 24, 2022
1
0
está bien. Buenas noticias para el propietario de Lenovo J607F.
Ayer, después de una larga investigación, traducción y aventura en el foro mundial chino y varios grupos, finalmente resolví algunos de mis problemas.
1. Obtuve la Rom/Firmware original del TB-J607F (pero aún no sé cómo adjuntar o cargar aquí porque tiene un tamaño de 2,5 gb, así que adjuntaré el enlace).
TB-J6070F CN Firmware Wifi:

[URL desplegarse = "true"] https://hkfront.wxwork.qq.com/downl...cfd8edf983bae2aa7&weixinnum=13102673015097907 [/ URL]

2. Tienes que cambiar el Firmware de la tablet con la Rom J607Z porque la ROM original es la Versión CN (no existe la Rom Global).
3. Si decide cambiar la Rom, simplemente descargue desde aquí el Firmware y el Procedimiento con el QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PD. la J607Z es una tableta SIM y la tableta Wifi J607F, tenga cuidado de que el servicio móvil no funcione después de cambiar la Rom porque la J607F no es una tableta Sim. También existe el riesgo de bloquear la tableta.

Espero haber ayudado a mucha gente con este problema.
Gracias
Mí amigo el enlace no funciona...crees podrías ayudarme? Te podría pagar por el servicio..!! De antemano gracias
 

suuperboom

Member
Jun 10, 2019
20
7
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).

Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)

2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G

you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.

Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
 
Last edited:

sltwtrr

Member
Oct 9, 2019
25
2
You can flash 607Z (P11 5G global) rom onto 607F (XiaoXin Pad Plus).

Process of converting it to global firmware, broadly, is
1) Change region from China/undefined to global
https://www.ppomppu.co.kr/zboard/view.php?id=androidtab&page...
There are a couple of XDA threads on doing this region switch too. My 607F was already switched to global when I bought it (from Aliexpress, had a pseudo-global firmware on it)

2) Using Lenovo Rescue Assistant in rescue mode, setting it to P11 5G

you cannot flash the lolinet firmwares with QFIL - the packages don't seem to be correctly configured for QFIL flashing - so you must use Lenovo Assistant to "rescue" the tablet to flash. It will download its own copy of the firmware.

Note: It didn't work for me on windows 10 - I had to use a windows 7 machine to get it working.
Did you change the firmware on your xioxin plus to the p11 5g rom? Is it an official firmware? Im asking because i want to improve the speakers performance on my xioxin plus (pseudo global). I understood that on the pseudo global its not possible to enhance the speakers performance? Any ideas would be a huge help
 

suuperboom

Member
Jun 10, 2019
20
7
I have no idea about speakers and firmware.
I changed by xiaoxin pad plus from Aliexpress with pseudoglobal to the official P11 5G rom, using LMSA to "rescue" the tablet. I think the setting in LMSA is P11 5G & "61".
My tablet came with the region already set to global when I checked, so I did not have to do that step.
Yes instructions are in Russian, but it is well detailed ;) Google Translate helped me.
 

kiendta

New member
Feb 28, 2022
3
0
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:


2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.

Hope I helped a lot of people with this problem.
Thanks
Did you re-install the j607f rom successfully? I’m using the j607z rom. Now i want to re-install the j607f.
Thank you!
 

raiso

Member
Feb 15, 2012
23
2
ok. Good news for the owner of Lenovo J607F.
Yesterday after a long research, translation and adventure in the Chinese world forum and various group, I finally solve few of my problem.
1. I get the Original Rom/Firmware of the TB-J607F (but i still don't know how to attach or upload here because is large 2.5gb so i will attache the link).
TB-J6070F CN Firmware Wifi:


2. You have to change the Firmware of the tablet with the J607Z Rom because the original ROM is CN Version (do not exist the Global Rom).
3. if you decide to change the Rom then just download from here the Firmware and Procedure with the QFIL: https://mirrors.lolinet.com/firmware/lenovo/Tab_P11/TB-J606F/
PS. the J607Z is a SIM tablet and the J607F Wifi Tablet, becareful the Mobile service will not work after you change the Rom because the J607F is not a Sim Tablet. Also there is a risk to brick the tablet.

Hope I helped a lot of people with this problem.
Thanks
I can't download the CN rom. can some one pls re-upload it
 

raiso

Member
Feb 15, 2012
23
2
Xiaoshin Pad Plus Chinese ROM 12.6.142 Firmware

https://drive.google.com/file/d/11JbIGoC1-sucYjBaQY-omJ7ce1BzRj_W/view?usp=sharing

Xiaoshin Pad Plus Chinese ROM 12.5.040 Firmware

https://drive.google.com/file/d/1EEtPfkt-ilj-Z6-7kdB4qRJg011LAqNe/view?usp=sharing

Do you know how to go back the CN rom?
Yes, very simple

I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....

1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock

1649771259550.png


- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go

2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
1649771992393.png
 

kiendta

New member
Feb 28, 2022
3
0
Yes, very simple

I flash base on Win 7. You have to download minimal ADB, QPST, all driver.....

1. unlock your pad plus
-Visit here to get the unlock file (The serial number case-sensitive)
https://www.zui.com/iunlock

View attachment 5586103

- Your wait for about 10min, Lenovo send the unlock file to your email (sn.img)
- Copy sn.img to ADB folder.
- Restart your pad plus to fastboot:
adb reboot bootloader
- Then you type these code:
fastboot flash unlock sn.img
fastboot oem unlock-go

2. Flash rom
- After unlock bootloader, turn off your pad plus.
- press and hold volume + button, then plug cable to pc/laptop (9008 mode)
- go to QPST install folder (maybe C:\Program Files (x86)\Qualcomm\QPST\bin), run QFIL.exe.
- Then Load content (rom folder), choose content.xml
- press download content button, wait for 5 minute and relax
View attachment 5586125
I have known what you said. I did go to the ZUI unlock website an fill in all the required information and click on the submit application button to apply for device-specific unlock. But the web said “请输入正确的序列号” (Please enter the correct IMEI1). I’m sure I filled serial number correctly. Until now, i have not got the unlock img. Please help me to get the unlock img, my device serial number is HA1GZ2HA, my email is: [email protected]. Thank you!
 

Attachments

  • 885F7948-2815-4079-B8FF-8AE6FEB714C5.png
    885F7948-2815-4079-B8FF-8AE6FEB714C5.png
    1.1 MB · Views: 20

plokijuh0000

New member
May 22, 2022
1
0
I have received an official email later.
Offer some possible suggestions:
1. To activate the tablet account and wait for more than 24 hours (I'm not sure)
2. The sn.img contains the serial number of the machine, so other people's sm.img cannot be used
 
Last edited:

Top Liked Posts