XT1766 Stuck In Qualcomm HS-USB QDLoader 9008

[OusaifShaka]

When I wrote command 'adb reboot bootloader' It went off and after it didn't restart when I plug it in to computer it detects Qualcomm Hs-Usb Qdloader 9008


Any fix

 

[madbat99]

When I wrote command 'adb reboot bootloader' It went off and after it didn't restart when I plug it in to computer it detects Qualcomm Hs-Usb Qdloader 9008


Any fix

Try pulling the battery. Then put it back in and hold power and volume down.

Did you erase the bootloader? What else did you do? Just rebooting bootloader would not do that. Did you erase the system or something? ADB commands only work while booted to system. Fastboot commands are for use in bootloader. Fastboot reboot bootloader

 

[OusaifShaka]

Try pulling the battery. Then put it back in and hold power and volume down.

Did you erase the bootloader? What else did you do? Just rebooting bootloader would not do that. Did you erase the system or something? ADB commands only work while booted to system. Fastboot commands are for use in bootloader. Fastboot reboot bootloader

I didn't erase anything. I just wanted to flash my E4 with RSDLite, but RSDLite was showing error in flashing gpt.bin failed or flash boot.img failed or flash recovery.img failed. Then I searched about it I found a way to flash firmware with Fastboot commands In Fastboot Commands I flashed some files but after that same error in Fastboot that FLash gpt.bin/boot.img/recovery.img was failed then I restarted my phone and it started and then I searched How to unlock bootloader of Moto E4 I found a video by following it I entered command adb reboot bootloader and when I pressed enter the phone went off and after it never restarted just shows black screen and nothing happens When I connect it to computer computer detects it as Qualcomm HS-USB QDLoader 9008 (COM5)

Please tell me any fix

 

[madbat99]

I didn't erase anything. I just wanted to flash my E4 with RSDLite, but RSDLite was showing error in flashing gpt.bin failed or flash boot.img failed or flash recovery.img failed. Then I searched about it I found a way to flash firmware with Fastboot commands In Fastboot Commands I flashed some files but after that same error in Fastboot that FLash gpt.bin/boot.img/recovery.img was failed then I restarted my phone and it started and then I searched How to unlock bootloader of Moto E4 I found a video by following it I entered command adb reboot bootloader and when I pressed enter the phone went off and after it never restarted just shows black screen and nothing happens When I connect it to computer computer detects it as Qualcomm HS-USB QDLoader 9008 (COM5)

Please tell me any fix

Were you trying to flash an older firmware than what was on the device? If you flashed an older bootloader than what you had, you have a hard brick. Paperweight

 

[OusaifShaka]

Were you trying to flash an older firmware than what was on the device? If you flashed an older bootloader than what you had, you have a hard brick. Paperweight

Actually I have XT1766 Variant so There is only one firmware of this variant
See at firmware.center
I don't know it is older or newer
Please help me get out of this

 

[madbat99]

Actually I have XT1766 Variant so There is only one firmware of this variant
See at firmware.center
I don't know it is older or newer
Please help me get out of this

No. There are many firmwares for xt1766. It's SPerry, aka sprint, boost, virgin mobile,etc version. They all use the same firmware, but there are many updates/full firmware packages.

https://androidfilehost.com/?w=files&flid=195327

Look towards the bottom at the Sperry firmwares. See? You likely flashed one older than the device had (you don't even know the firmware version?) And now have a hard brick.
I have the same device, and have seen others do what you did. It's dead. Your only chance is trying to return it to Motorola. Others have gotten replacement devices from Motorola saying it was a bad update.
But yeah, it's hard bricked. No coming back from that one.

The newest I've seen is SPERRY_SPRINT_NCQS26.69-64-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
So if you took ota updates, you were likely close to this build at least. You cannot flash a bootloader older than the one you are on.

 

[OusaifShaka]

No. There are many firmwares for xt1766. It's SPerry, aka sprint, boost, virgin mobile,etc version. They all use the same firmware, but there are many updates/full firmware packages.

https://androidfilehost.com/?w=files&flid=195327

Look towards the bottom at the Sperry firmwares. See? You likely flashed one older than the device had (you don't even know the firmware version?) And now have a hard brick.
I have the same device, and have seen others do what you did. It's dead. Your only chance is trying to return it to Motorola. Others have gotten replacement devices from Motorola saying it was a bad update.
But yeah, it's hard bricked. No coming back from that one.

The newest I've seen is SPERRY_SPRINT_NCQS26.69-64-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
So if you took ota updates, you were likely close to this build at least. You cannot flash a bootloader older than the one you are on.

My device is sperry_sprint This is firmware version of my device : XT1766_SPERRY_SPRINT_7.1.1_NCQ26.69-56_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml
I tried to flash this but RSDLite and Fastboot gave me error
Please sir there should be something to unbrick it

 

[OusaifShaka]

No. There are many firmwares for xt1766. It's SPerry, aka sprint, boost, virgin mobile,etc version. They all use the same firmware, but there are many updates/full firmware packages.

https://androidfilehost.com/?w=files&flid=195327

Look towards the bottom at the Sperry firmwares. See? You likely flashed one older than the device had (you don't even know the firmware version?) And now have a hard brick.
I have the same device, and have seen others do what you did. It's dead. Your only chance is trying to return it to Motorola. Others have gotten replacement devices from Motorola saying it was a bad update.
But yeah, it's hard bricked. No coming back from that one.

The newest I've seen is SPERRY_SPRINT_NCQS26.69-64-5_cid50_subsidy-DEFAULT_regulatory-DEFAULT_CFC.xml.zip
So if you took ota updates, you were likely close to this build at least. You cannot flash a bootloader older than the one you are on.

I can't return my device to Motorola because I have bought it as a refurbished and in my city there is no Motorola service center
HeLP ME

 

[madbat99]

I didn't erase anything. I just wanted to flash my E4 with RSDLite, but RSDLite was showing error in flashing gpt.bin failed or flash boot.img failed or flash recovery.img failed. Then I searched about it I found a way to flash firmware with Fastboot commands In Fastboot Commands I flashed some files but after that same error in Fastboot that FLash gpt.bin/boot.img/recovery.img was failed then I restarted my phone and it started and then I searched How to unlock bootloader of Moto E4 I found a video by following it I entered command adb reboot bootloader and when I pressed enter the phone went off and after it never restarted just shows black screen and nothing happens When I connect it to computer computer detects it as Qualcomm HS-USB QDLoader 9008 (COM5)

Please tell me any fix

So you tried to flash it before you unlocked the bootloader? You can't flash anything before the bootloader is unlocked. So did it ever unlock? If an older bootloader actually flashed in all that crazy bass ackwards flashing you did, it's toast. Nothing can be done. Sorry dude.
If you can get it to fastboot mode, you can still use rsdlite. Flashing the latest firmware of course. But not likely.