xt912 soft brick need help

[tempb]

my xt910 16gb verizone.it in jb 4.1.2. i downgage it to 4.0.4 with rsd and fail at 6/19 error. now my phone stuck at ap fastboot flash mode. i can not enter recovery mode . i download RAZR_RETAIL_EU_JB_UNBRICK and run unbrick.bat but it error can't flash
######################################
# HANDY-FAQ.DE RAZR RETAIL EU JB #
# UNBRICK - TOOL #
# written by HSD-Pilot #
######################################
Flash System....
sending 'system' (262144 KB)... OKAY [ 13.155s]
writing 'system'... FAILED (status read failed (Unknown error))
Flash Boot....
sending 'boot' (8192 KB)... FAILED (status read failed (Unknown error))
Press Power and boot your RazR into the Bootloader
Select Recovery and Wipe Data/Cache
Apply the Update from external Storage
After you've done that you're unbricked!
Press any key to continue . . .

so sorry i do not speak english well. everybody please help me unbrick it. thanks :crying:

 

[tempb]

please help me

 

[sk842018]

You cannot downgrade. You running x912 or x910?

---------- Post added at 06:54 PM ---------- Previous post was at 06:38 PM ----------

You will need the correct file and use rsd lite or you may be able to use house of moto. Cannot downgrade your have to use most current software version .

 

[tempb]

You cannot downgrade. You running x912 or x910?

---------- Post added at 06:54 PM ---------- Previous post was at 06:38 PM ----------

You will need the correct file and use rsd lite or you may be able to use house of moto. Cannot downgrade your have to use most current software version .

my phone is xt912 but i found in the about is the xt910 4.1.2 . now it softbrick i can not flash it with any firmware

 

[Draxin]

my phone is xt912 but i found in the about is the xt910 4.1.2 . now it softbrick i can not flash it with any firmware

K... what? xt912 and xt910 are two different phones though they are both called razr.
http://forum.xda-developers.com/showthread.php?t=2690277

If you have the xt912, you can only flash, and use, xt912 utilities and firmware. If it is a xt910, same thing, only xt910 utilities and firmware.

as SK8 mentioned, you cannot downgrade from JB back to ICS.

If you truly have a xt912, then you need to use a xt912 firmware to reflash your phone in RSD and that is your problem.

 

[sk842018]

Look on back of phone towards bottom, it'll say x9___. Will be able help you further once correct phone is identified.

 

[tempb]

K... what? xt912 and xt910 are two different phones though they are both called razr.
http://forum.xda-developers.com/showthread.php?t=2690277

If you have the xt912, you can only flash, and use, xt912 utilities and firmware. If it is a xt910, same thing, only xt910 utilities and firmware.

as SK8 mentioned, you cannot downgrade from JB back to ICS.

If you truly have a xt912, then you need to use a xt912 firmware to reflash your phone in RSD and that is your problem.

can you give me a link jelly bean 4.1.2 firmware flash with rsd? thanks

Look on back of phone towards bottom, it'll say x9___. Will be able help you further once correct phone is identified.

back of phone is xt912. but first i see in about of the phone is xt910 but phone work perfect untill i downgrade it. now it soft brick. any body can give a firware to recover it. thnaks

 

[Draxin]

can you give me a link jelly bean 4.1.2 firmware flash with rsd? thanks



back of phone is xt912. but first i see in about of the phone is xt910 but phone work perfect untill i downgrade it. now it soft brick. any body can give a firware to recover it. thnaks

This is Mattlgroff's utility for xt912 JB (be sure to hit his thanks)
http://forum.xda-developers.com/showthread.php?t=2192467
This utility should have pretty much anything you need for a xt912 from flashing back to to stock firmware, to rerooting. Just read his instructions thoroughly, and again, thank him.


http://forum.xda-developers.com/showthread.php?t=2231289
This is any xt910 firmware you might have depending on region.

 

[tempb]

This is Mattlgroff's utility for xt912 JB (be sure to hit his thanks)
http://forum.xda-developers.com/showthread.php?t=2192467
This utility should have pretty much anything you need for a xt912 from flashing back to to stock firmware, to rerooting. Just read his instructions thoroughly, and again, thank him.


http://forum.xda-developers.com/showthread.php?t=2231289
This is any xt910 firmware you might have depending on region.

i downloading and try it. me would tell the result

 

[tempb]

[*] Simple Razr Restore
[*] Windows Version
[*] Created by mattlgroff
[*]
[*] Before continuing, ensure your Razr is in the
[*] "AP Fastboot" mode and connected via USB.
[*] WARNING: Do not do this at LOW BATTERY! You have been warned!
[*]
[*] Press any key to continue.
sending 'mbm' (512 KB)... OKAY [ 0.032s]
writing 'mbm'... OKAY [ 0.487s]
rebooting into bootloader... OKAY [ 0.285s]
< waiting for device >
sending 'mbmloader' (42 KB)... OKAY [ 0.009s]
writing 'mbmloader'... OKAY [ 0.299s]
sending 'mbm' (512 KB)... OKAY [ 0.306s]
writing 'mbm'... OKAY [ 0.485s]
rebooting into bootloader... OKAY [ 0.276s]
< waiting for device >
erasing 'cache'... OKAY [ 1.419s]
sending 'logo.bin' (854 KB)... OKAY [ 0.049s]
writing 'logo.bin'... OKAY [ 0.815s]
sending 'devtree' (512 KB)... OKAY [ 0.313s]
writing 'devtree'... INFOPreflash validation failure
FAILED (remote: )
sending 'system' (262144 KB)...

it fail as log. it stuck sending 'system' (262144 KB)... very very long...

 

[tempb]

have a way different? helps me please. i want try with rsd flasher but i have not flash file

 

[sibujacob]

unbrick the xt910 Razr maxx

my xt910 16gb verizone.it in jb 4.1.2. i downgage it to 4.0.4 with rsd and fail at 6/19 error. now my phone stuck at ap fastboot flash mode. i can not enter recovery mode . i download RAZR_RETAIL_EU_JB_UNBRICK and run unbrick.bat but it error can't flash
######################################
# HANDY-FAQ.DE RAZR RETAIL EU JB #
# UNBRICK - TOOL #
# written by HSD-Pilot #
######################################
Flash System....
sending 'system' (262144 KB)... OKAY [ 13.155s]
writing 'system'... FAILED (status read failed (Unknown error))
Flash Boot....
sending 'boot' (8192 KB)... FAILED (status read failed (Unknown error))
Press Power and boot your RazR into the Bootloader
Select Recovery and Wipe Data/Cache
Apply the Update from external Storage
After you've done that you're unbricked!
Press any key to continue . . .

so sorry i do not speak english well. everybody please help me unbrick it. thanks :crying:

please use the website electronicparts.co.in and check useful link2 . the guy is an expert on troubleshooting xt910s.

 

[tempb]

please use the website electronicparts.co.in and check useful link2 . the guy is an expert on troubleshooting xt910s.

my phone now can not access stock recovery mode, i can not install custom rom. can you help me the stock rom flash with rsd? thanks you

 

[tempb]

hello every body els help me

 

[tydiamond11]

hello every body els help me

Ok so first make sure your battery is charged and go to the flash boot menu by holding both volumes and push and let go of the power button. now go to ab fast boot. now pug into your pc or mac. Use this software to fully flash back to stock and re root and install safestrap. http://forum.xda-developers.com/showthread.php?t=2192467

 

[StarFla_er]

Hi all, I have a Motorola xt912, not accidentally flash its firmware (droid 4 utilyti xt894). Now the phone will not turn and no shows in PC (no windows 7, not Ubuntu). Only when connecting the factory cable flashing white LED, use normal USB and factory Cable, tried almost everything to no avail, help please!

 

[sd_shadow]

Hi all, I have a Motorola xt912, not accidentally flash its firmware (droid 4 utilyti xt894). Now the phone will not turn and no shows in PC (no windows 7, not Ubuntu). Only when connecting the factory cable flashing white LED, use normal USB and factory Cable, tried almost everything to no avail, help please!

you have a known working Fastboot cable (aka programming or factory cable) ?
not a stock usb cable.
if you're not sure see fastboot cable in
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools

Sent from my XT1254 using XDA Labs

 

[StarFla_er]

you have a known working Fastboot cable (aka programming or factory cable) ?
not a stock usb cable.
if you're not sure see fastboot cable in
Moto Drivers, Firmware, RSD Lite, and other Unbricking Tools

Sent from my XT1254 using XDA Labs

http://uploads.ru/kHeBr.jpgWorking, connect the cable ( cable with the resistor 1k ) to the other board 912 starts without a battery, and that charge after the firmware is not displayed on the computer. After installing the firmware from the 894 to my 912 (

 

[sd_shadow]

http://uploads.ru/kHeBr.jpgWorking, connect the cable ( cable with the resistor 1k ) to the other board 912 starts without a battery, and that charge after the firmware is not displayed on the computer. After installing the firmware from the 894 to my 912 (

haven't seen anyone recover a xt912 after flashing xt894 firmware

Sent from my XT1254 using XDA Labs