XT925 bricked! Need help

kokinator02

Senior Member
Apr 28, 2014
81
10
0
My dear friend, I was on the same exact loop failure on fastboot because of some GPT flash failure (even though I've done this many times, for some reason it failed this time).

The solution is very simple, get the 2 files from the OTA zip (check the link below) and flash both with fastboot like this:

“fastboot oem fb_mode_clear"

...wait for ok confirmation

“fastboot flash partition gpt.bin"

...also wait for process to complete...

“fastboot flash tz tz.mbn"

When it's done, type: “fastboot reboot"

And then will proceed with the OTA normally.

All of the above was posted by user EdwinCampos at grupoandroid: http://www.grupoandroid.com/index.php?/topic/109198-[RESUELTO]-Actualizar-a-KitKat-no-pasa-de-pantalla-fastboot#entry1513251.

All credits to him.
 

mitsus

Member
Jan 12, 2009
41
2
0
I posted gpt and tz from fido ota? Check my recent posts.
I will look...

---------- Post added at 06:00 PM ---------- Previous post was at 05:56 PM ----------

To unbrick you need gpt and tz from rtfr 4.4.2 ota.
Very small files, anyone can upload. If not, I will when I am on pc.

---------- Post added at 06:02 PM ---------- Previous post was at 06:00 PM ----------

Hit me with your email on pm

---------- Post added at 06:05 PM ---------- Previous post was at 06:02 PM ----------

Your unbrick files are ready for shipping..

---------- Post added at 06:26 PM ---------- Previous post was at 06:05 PM ----------



Waiting for your email
Hi, please can you send me tz and gpt files? I've an xt925 bricked with installed 4.4.2 ota.
 

skydosa

New member
Jan 21, 2015
2
0
0
Hi

I have a similary problem.

I have flash 4.1 retail europe version with RSD lite and update in 4.4 with offical OTA. No problem, i have make that more than 10 with the one rom stock.

But the night when the phone would install the OTA. IT doesn't work. My XT925 start on APfastboot with this message. And i can't to start on JB or recovery.
Code:
AP Fastboot Flash Mode (S)
10.9B(*) (sha-07671a2, 2014-07-29 12:35:27)
eMMC Info : Size 16GB

Device is LOCKED, Status Code : 0

Battery OK

Transfer Mode :
USB connected




Downgraded security version
update gpt_main version failed
Failed to hab check for gpt_backip : 0x35
failed to load GPT
CID Read Failure
Invalid CID status 0x69
No SP partition found
Fastboot Reason : Invalid GPT
usb connected
When i try to flash my rom stock with RSD lite, it's make : ""Failed flashing process. 2/20 flash sbl1_signed" -> Unable to open file in operation."

Please HELP!
 

tristan46

New member
Jan 22, 2011
1
2
0
Hi skydosa,

I exactly had the same problem you're having. I resolved it thanks to this other thread.

I just downloaded that file and then I flash my phone with these commands :
Code:
fastboot flash partition gpt.bin
fastboot flash tz tz.mbn
I hope it will help you as it has helped me !
 
  • Like
Reactions: Von_Tugend and x54

x54

New member
Jan 19, 2015
1
0
0
Hi skydosa,

I exactly had the same problem you're having. I resolved it thanks to this other thread.

I just downloaded that file and then I flash my phone with these commands :
Code:
fastboot flash partition gpt.bin
fastboot flash tz tz.mbn
I hope it will help you as it has helped me !
It's WORKS!!!! U R King for me!!!! THANKS!!!!!
 

mbrett73

New member
Feb 8, 2015
1
0
0
Issues after unlock Bootloader

Hello guys,

I need your help regarding to an issues on razr HD I unlock bootloader following procedure from Motorola and after hit enter I saw on phone's screen "UNLOCKED" then I just click enter screen becomes black and right now I can not turn on my phone.
Anyone knows what is happen? Any help will be great.

Tks,

Brett
 

archi_967

Member
Feb 8, 2015
8
0
0
Bootloeader locked

Hello guys,

I need your advice. My xt925 dead or not?
What i did:
1) Bootloader was unlocked through official site.
2) I installed CM11 and it worked fine
3) When 4.4.2 came out I went back to 4.1.2 (O2) through RSD Lite and i did OTA update. Everything worked except WI-FI
4) I decided to try other stok rom I chose 4.1.2 (CEE) and i did OTA update.
5) After first reboot i got this


Right now i can't unlock bootloader and RSD Lite doesnt show my mobile when he connected in USB
 

Xnt13

Member
Oct 27, 2008
16
0
0
Hello,
I have a similar problem.
The phone was purchased in Germany, then unlocked via the website of Motorola, has been updated to 4.1.2 (9.8.2Q-8-XT925_VQUL-1601), then updated via OTA to 4.4.2. The latest firmware was 180.46.119.XT925.O2.en.DE KDA20.119.
And everything was fine, but one morning the phone turned off, although the night was a 93% charge. When I turned on the phone, the phone wrote this (see attached):
Code:
Device is LOCKED. Status Code: 0

CID Read Failure
Invalid CID status 0x69
No valid PIV block in SP for system
piv validation failed (system)
When I try to flash files gpt.bin and tz.mbn from 4.1.2 O2 en.DE
displays the following error:
Code:
fastboot flash partition partition_signed
(bootloader) Variable not supported!
target reported max do' (19wnload size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.020s]
writing 'partition'...
FAILED (remote failure)
finished. total time: 0.110s

fastboot flash tz tz_signed
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz2 KB)...
OKAY [ 0.036s]
writing 'tz'...
(bootloader) Preflash validation failed
FAILED (remote failure)
finished. total time: 0.101s
At the same time the phone screen shows:
downgraded security version
update gpt_main version failed
preflash validation failed for GPT

And if I try to flash files gpt.bin and tz.mbn from XT925_rcica-user-4.4.2-KDA20.117 or Blur_Version.180.46.117.XT925.CEE-Retail.en.EU then it shows another error:
Code:
fastboot flash partition gpt.bin
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.030s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.350s

fastboot flash tz tz.mbn
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (210 KB)...
OKAY [ 0.040s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.310s
And at the same on the phone screen is nothing changes.
I could not flash the firmware 4.1.2 (9.8.2Q-8-XT925_VQUL-1601_USERSIGNED_S7_USAVANQUO2DE02C.0R_LSAVNQJBO2DE_P014_A004_CFC.xml) via RSD, even removing rows from xml file. Through Hose Of Moto failed too. :( I think I need gpt.bin and tz.mbn files from OTA update 180.46.119.XT925 KDA20.119.
I have exactly the same but working xt925. Here's what command "getvar" shows from a bricked phone:
Code:
fastboot getvar all
(bootloader) version-bootloader: 109B(*)
(bootloader) product: vanquish_u
(bootloader) secure: yes
(bootloader) mid: 0056
(bootloader) version: 0.5
(bootloader) serialno: f15e52c
(bootloader) qe:
(bootloader) [B][COLOR="Red"]unlocked: Not supported[/COLOR][/B]
(bootloader) iswarrantyvoid: Not supported
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 16GB
(bootloader) reason: Reboot to bootloader
(bootloader) revision-hardware: 0x8300
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 553D100202000100000000000000
(bootloader) [B][COLOR="Red"]cid: 0xdead[/COLOR][/B]
all:
finished. total time: 0.080s
and that from the working phone:
Code:
fastboot getvar all
(bootloader) version-bootloader: 109B(*)
(bootloader) product: vanquish_u
(bootloader) secure: yes
(bootloader) mid: 0056
(bootloader) version: 0.5
(bootloader) serialno: TA674011ZA
(bootloader) qe: qe 1/1
(bootloader) unlocked: yes
(bootloader) iswarrantyvoid: yes
(bootloader) max-download-size: 31457280
(bootloader) emmc-size: 16GB
(bootloader) reason: Key pressed
(bootloader) revision-hardware: 0x8300
(bootloader) cpu: MSM8960 CS
(bootloader) uid: 2178AD0002000100000000000000
(bootloader) cid: 0x07
all:
finished. total time: 0.025s
I have over seven days trying to revive the phone. Please help me, I already broke my brain.
Ps .: And one more thing ... where xt925 recorded CID? I have not found mmcblk1p18 on it.
 

Attachments

Xnt13

Member
Oct 27, 2008
16
0
0
Flash gpt and tz from 4.4.2
Are you kidding me? Read my previous post in more detail!
And if I try to flash files gpt.bin and tz.mbn from XT925_rcica-user-4.4.2-KDA20.117 or Blur_Version.180.46.117.XT925.CEE-Retail.en.EU then it shows another error:
Code:
fastboot flash partition gpt.bin
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'partition' (32 KB)...
OKAY [ 0.030s]
writing 'partition'...
(bootloader) This may take a few seconds, if a
(bootloader) different partition table is being
(bootloader) flashed since we need to backup
(bootloader) and restore a few partitions
(bootloader) Failed to program partition table
FAILED (remote failure)
finished. total time: 0.350s

fastboot flash tz tz.mbn
(bootloader) Variable not supported!
target reported max download size of 31457280 bytes
sending 'tz' (210 KB)...
OKAY [ 0.040s]
writing 'tz'...
(bootloader) Failed to erase partition
(bootloader) Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.310s
And at the same on the phone screen is nothing changes.
That's why I ask GPT and TZ from 4.4.2 KDA20.119 O2 or CEE or GB (May be works from KDA20.117)
Give it to me please, if you have it.
 
Last edited:

Xnt13

Member
Oct 27, 2008
16
0
0
The same error. These files gpt.bin and tz.mbn from XT925_rcica-user-4.4.2-KDA20.117
Code:
C:\SDK\sdk\platform-tools>mfastboot flash partition gpt.bin
sending 'partition' (32 KB)...
OKAY [  0.022s]
writing 'partition'...
This may take a few seconds, if a
different partition table is being
flashed since we need to backup
and restore a few partitions
Failed to program partition table
FAILED (remote failure)
finished. total time: 0.295s

C:\SDK\sdk\platform-tools>mfastboot flash tz tz.mbn
sending 'tz' (210 KB)...
OKAY [  0.036s]
writing 'tz'...
Failed to erase partition
Failed to flash partition tz
FAILED (remote failure)
finished. total time: 0.268s