[XT925] - Phone wont recognized through USB, but is still charging over wall charger

[derheusel]

Hi guys,

i've a strange issue with my XT925 and i think i softbricked it.
The phone wont be recognized through USB, wether in Fastboot Mode or in normal state.
I've a working CM11 on it, latest nightly.
So it isn't work in fastboot mode, i'm not able to flash a stock ROM and lock the bootloader.
Is it possible to flash a new boot or kernel over recovery? Or a flashable Stock ROM?
I tried different PCs, Windows XP, Windows 7, Windows 8 - 8.1.
Thanks for your help, i'm not a flashing noob

derHeusel

 

[jlaird1990]

Same thing happened to my atrix HD after installing cm 11. Would also like some help on this issue please and thanks

Sent from my Atrix HD using xda app-developers app

 

[aviwdoowks]

Try option # 3
http://forum.xda-developers.com/showpost.php?p=49721594&postcount=19
I would wait for the next philz due out any moment.
Current V 6079
http://goo.im/devs/philz_touch/CWM_Advanced_Edition

You could use recovery tools to flash the img from your homescreen.

 

[derheusel]

Try option # 3
http://forum.xda-developers.com/showpost.php?p=49721594&postcount=19
I would wait for the next philz due out any moment.
Current V 6079
http://goo.im/devs/philz_touch/CWM_Advanced_Edition

You could use recovery tools to flash the img from your homescreen.

Thanks mate, but yesterday i've flashed a working CM10 on it and did a /system format too and all the same.
I cannot flash a new recovery image because the phone isn't recognized through Windows.
No DING DONG or any entry in the windows device manager when plugging in.

regards derHeusel

 

[aviwdoowks]

Thanks mate, but yesterday i've flashed a working CM10 on it and did a /system format too and all the same.
I cannot flash a new recovery image because the phone isn't recognized through Windows.
No DING DONG or any entry in the windows device manager when plugging in.

regards derHeusel

You can flash recovery from your current recovery, Rom Manager- Q recovery, recovery tools will load the img from phone up.
I have posted HD philz flashables in the general twrp thread.

---------- Post added at 09:56 AM ---------- Previous post was at 09:53 AM ----------

You sure your cable is good?

 

[derheusel]

Try option # 3
You could use recovery tools to flash the img from your homescreen.

Do you think its a recovery problem? I don't want to cut the last rope to use my phone if something fails, it's completely bricked.
Maybe flash a new kernel or boot.img where the USB drivers are located?

You sure your cable is good?

Yes, tried two original Moto, one Sony, some no name and my factory cable.

 

[aviwdoowks]

Do you think its a recovery problem? I don't want to cut the last rope to use my phone if something fails, it's completely bricked.
Maybe flash a new kernel or boot.img where the USB drivers are located?


Yes, tried two original Moto, one Sony, some no name and my factory cable.

Good point.
Wait for philz...
???
IDNK

 

[derheusel]

Good point.
Wait for philz...
???
IDNK

But thanks for your help.

 

[jlaird1990]

Your not alone I have the same issue. But I managed to get my phone flashed with stock firmware. I then couldn't get root so I flashed the latest slim kat in recovery and fired her up. I still can't connect to my computer either although I can still use the phone. I think it has to do with the flashing of one of the other .img's. Usually ROMs only flash the system IMG and maybe data and cache but maybe the new KitKat had to flash a modified non-hlos IMG and that could also be why our cell radios are screwy on cm11. I'm not new to this and I'm almost sure that's where the problem is.

Sent from my Atrix HD using xda app-developers app

 

[derheusel]

OK guys,

new news.
I've flashed a CM10-20130220 on it.
Boot it up. Nothing happend.
Now, i booted into fastboot mode. Did it hard by pressing Power + Vol. Plugged it in and "ding dong".
Immediately started RSD and flashed back stock.
Until now, everything works. it gets power over USB.
But i've the old problem (since first stock - buying): cannot copy files.

hope it helps.
thanks.
derheusel