Here's the problem: I have this XT925 and I wanted to update it to lollipop, so I unlocked the bootloader, rooted it and installed TWRP. I flashed the ROM but when it booted I noticed that Wifi won't turn on and that mobile network showed and error. So I decided to flash stock 4.4.2 ROM to get the correct Modem I needed to flash stock 4.1.2 since stock 4.4.2 hasn't arrived to my country/service provider. I flashed stock 4.1.2 and as soon as it boot up I started the process to flash 4.4.2 without checking the battery level, when I tried to flash kitkat I couldn't because the fastboot said that battery was low, so I tried to boot up but I couldn't since the rom had been wiped, then I tried to boot into recovery (TWRP) to charge it from there but I couldn't since recovery was deleted when I flashed 4.1.2. So I'm stuck into fastboot with no battery, no rom and no recovery. I've read that a factory cable might charge my phone but when I attempted to do one myself I discovered that the micro usb cable I used only had 4 pins instead of the 5 needed, I've been searching all over my house for a micro usb with 5 pins but didn't had any luck, but when I found that there was this website that used to sell some kind of adapter from normal micro usb to factory cable I tried to buy it, only to discover that the site has been taken down and I haven't been able to find something like that since.
I don't want to buy a factory cable since the shipping is very expensive to where I live (Mexico), any ideas on what to do?
I don't want to buy a factory cable since the shipping is very expensive to where I live (Mexico), any ideas on what to do?