• Introducing XDA Computing: Discussion zones for Hardware, Software, and more!    Check it out!
  • Fill out your device list and let everyone know which phones you have!    Edit Your Device Inventory

Yt9213a 0009 v001 20191126 3.1 8227l android 9

Search This thread

datsu1997

New member
Jan 17, 2021
3
0
Hello ,
I have a YT9213AJ and I jusy update to last version from xy gala but I have a problem with can bus connect . I tried to set up from factory settings > protocol setting . but when I want to access that setting it takes me to the previous screen. I couldn't do anything else. is there a patch?
 

Attachments

  • IMG_20210117_170623.jpg
    IMG_20210117_170623.jpg
    3.8 MB · Views: 217

velles2003

Senior Member
Nov 17, 2010
84
24
OK, so i wnat to try to get from 6.0 to 8.1 at least.
trick is i dont want to take it out from the car. can it be done from the USB's?

on the russian 4pda.ru i've found this:

"The transition from 6.0 to 8.1 is carried out:
1. if there is a full dump to 6.0 for rollback.
2. flashing with a USB flash drive in the "format all + download" mode (because the memory is repartitioned)."

i'm thinking it must mean that both current 6.0 (the zip should be the version installed and working) and the 8.1 new firmware , must be written on root of the usb_disk.

how do you get it in format all + download mode?

i don;t understand what they mean by this.
can anyone help?

the russian forum:
 

datsu1997

New member
Jan 17, 2021
3
0
OK, so i wnat to try to get from 6.0 to 8.1 at least.
trick is i dont want to take it out from the car. can it be done from the USB's?

on the russian 4pda.ru i've found this:

"The transition from 6.0 to 8.1 is carried out:
1. if there is a full dump to 6.0 for rollback.
2. flashing with a USB flash drive in the "format all + download" mode (because the memory is repartitioned)."

i'm thinking it must mean that both current 6.0 (the zip should be the version installed and working) and the 8.1 new firmware , must be written on root of the usb_disk.

how do you get it in format all + download mode?

i don;t understand what they mean by this.
can anyone help?

the russian forum:

I tried to update to latest version but nothing is changed , any idea ?
I tried to use apk for canbus settings from older version of firmware but not working . i think it shouldn't be a problem with those canbus control apk
 

datsu1997

New member
Jan 17, 2021
3
0
I tried to update to latest version but nothing is changed , any idea ?
I tried to use apk for canbus settings from older version of firmware but not working . i think it shouldn't be a problem with those canbus control apk

I forgot to mention that the navigation is presented as seicane for golf 5 but I have no more information I mention that I don't speak English very well, sorry again
 

Marekloop

Member
Apr 20, 2020
17
3
OK, so i wnat to try to get from 6.0 to 8.1 at least.
trick is i dont want to take it out from the car. can it be done from the USB's?

on the russian 4pda.ru i've found this:

"The transition from 6.0 to 8.1 is carried out:
1. if there is a full dump to 6.0 for rollback.
2. flashing with a USB flash drive in the "format all + download" mode (because the memory is repartitioned)."

i'm thinking it must mean that both current 6.0 (the zip should be the version installed and working) and the 8.1 new firmware , must be written on root of the usb_disk.

how do you get it in format all + download mode?

i don;t understand what they mean by this.
can anyone help?

the russian forum:
They mean flashing unit over PC - SP Flash Tool
For that you need also download all drivers for MTK chips. Also USB cable MALE\MALE, for connecting PC to unit USB connector 4pin.

Set unit to direct shutdown mode - factory setting 8888 than Engineering...something there you use code 26959910 and select direct shutdown.
Than in SP Flash tool you shoud check in Format tab "format all except bootloader". - This two points are very important as you will get a brick if you miss them.

Than in Download tab in roll menu check format all and download.
Turn off the unit - pull out key from ignition.
Than click download in SP flash tool and afterwards connect USB from unit to PC.
Format and download will start automatically.
Good luck.
 
Last edited:

cocoamba

New member
Feb 5, 2021
1
0
Hello guys! Please tell me if there is any newer version of software for my YT9213A_00009-V001 unit.

I have the following problems: no RDS informatios displayed, equalizer working only in music play and Not in radio mode, fader left-right and front-back not working at all and there is a pause and a sudden increase in volume between 19 and 20 volume.

My biggest dissapointment is the missing RDS function (it was advertised With rds present and functional).

I Boutht the unit from aliexpres and this is how it came (the software is not modified or replaced/upgraded by me in any way).

I attached some pictures. If i click on XY AUTO: 5.3 (X2) THEN VERSION 20200818 IS DISPLAYED.

IF I CLICK ON CAN PRO 3.3 (X2) THEN VERSION 20200812 IS DISPLAYED.

IF I CLICK ON MCU: 3.5 (X2) THEN VERSION 20200425 IS DISPLAYED.

Please tell me wich of this is the radio version(it's a little bit confusing) and if is there any newer version available that can solve the missing RDS problem.

Thank you,
Cocosamba
 

Attachments

  • 20210205_223922.jpg
    20210205_223922.jpg
    1.4 MB · Views: 135
  • 20210205_223932.jpg
    20210205_223932.jpg
    1.7 MB · Views: 138
  • 20210205_223941.jpg
    20210205_223941.jpg
    1.9 MB · Views: 107
  • 20210205_223947.jpg
    20210205_223947.jpg
    1.7 MB · Views: 135

Marekloop

Member
Apr 20, 2020
17
3
Hello guys,
did anybody try AUX-IN via DIN connectors on this radio? I do have "bluetooth+mic+AUXin" unit to bypass built in mic., but I am unable to hear it over AUXin of this radio :/
 

Marekloop

Member
Apr 20, 2020
17
3
Hi,
today 7.2.2021 I tried:


Use preloader in attachement.
In SPFlashtool do not forget to check not to format bootloader ;)
Than Format all and download.

Than you will get newest version - see attachement.
It is API27 8.1
 

Attachments

  • preloader.bin
    123.1 KB · Views: 55
  • IMG_20210207_205153.jpg
    IMG_20210207_205153.jpg
    3.8 MB · Views: 167
Last edited:
  • Like
Reactions: velles2003

adertiphart

Member
Mar 17, 2021
5
0
Hello,

here i give you a "step by step" tutorial how to update your YT9213A China-Radio

- formated an USB Stick
- Download the latest -ZIP and the -BIN file from here: https://www.mediafire.com/folder/sa41gjayjje91/YT9213A++Update
- copie the 2 files: "XYAUTO_UPDATE(1).BIN" and "xyauto_ui1_9213A_full_8227L_demo-ota-XYXYXYXY.ZIP to the USB Stick
- Put the USB-Stick into the USB2 Port (Thats Important, the USB1 Port doesn't work !!!)
- The Radio recogizes the stick and offers the Update Button, otherwise you can start the Update manuell.
- It starts to update after pressing the update-Button and reboots after 20%
. the Android-Robot assumes and will be shown until the update is finished.

Have Fun &

best regards
Maniac2002
So I got to the part where it auto reboots...but then it stops at bootloader screen and this message. File no good?

And will not allow me to select any options [volume/power buttons do not work]
 

Attachments

  • 16160316309545977152609116827524.jpg
    16160316309545977152609116827524.jpg
    1 MB · Views: 124
  • 16160316843405735116619513341771.jpg
    16160316843405735116619513341771.jpg
    815.8 KB · Views: 123
  • 16160317122475451460991110278107.jpg
    16160317122475451460991110278107.jpg
    2.2 MB · Views: 124
Last edited:

Marekloop

Member
Apr 20, 2020
17
3
So I got to the part where it auto reboots...but then it stops at bootloader screen and this message. File no good?

And will not allow me to select any options [volume/power buttons do not work]
You can navigate in this menu only with hardware buttons. You can find contacts for this harware buttons on electronic board. See debricking manual for pictures.
Or update using SP Flash tool.
 

Marekloop

Member
Apr 20, 2020
17
3
If you would try to solder new mic., cause original one do not work properly, you have to dissassemble original one and than it works good :)
IMG_20210404_201103.jpg
IMG_20210404_201036.jpg
 
Last edited:

Top Liked Posts