Search This thread

loki_cj

New member
Jul 7, 2015
2
0
stuck at yureka plus logo

my yu yureka plus is a stock "pure android version" and i tried the steps given above for rooting bt the device is not getting to recovery or not even getting switched on. it is stuck on yureka plus logo continuously..
only thing is it is still getting into bootloader by connecting the phone nd pressing the volume up button .
so please if anybody can help me pls do reply urgently ..or email me to my mail id:[email protected]

and also can i get to install the stock android version of cyanogen kitkat 4.4.4?? if so please tell me.
 

sakram2010

New member
Mar 1, 2016
3
0
Struck at boot screen after unlocking and flashing twrp

Sir,
I have unlocked the phone using fastboot method
then, i flashed twrp recovery using fastboot
when i reboot, i got stuck in boot screen.
Yu yureka symbol is coming, then phone turns off and turns on again in yu symbol.
i have downloaded the fastboot firmware and flashed now.
But i need to root and flash twrp.
Kindly help me.
 

bharathi703

New member
Mar 3, 2016
2
1
I tried in my phone done perfectly, but again logging to cyanogen recovery, please find attached command.

I am trying to install twrp from past 1 month, but still cyanogen recovery.


Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

Here is a noob friendly guide.

1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices

Type : adb reboot-bootloader
Your phone will restart into bootloader.

Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways

Method 1 : If you want to retain the Original Recovery - Hot boot

Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img

This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Method 2: If you want to flash Custom Recovery - Flash

Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img

Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Hit thanks/like if this helped
Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!

EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.
 
  • Like
Reactions: Shreeyash123

vinaykamikaze

New member
Mar 9, 2016
1
0
Stuck when image command is given.??

i been trying to root my phone through your step but got stuck after i unlock my boot loader and give command for method 1 its showing me error like cant be found. please help me out if you could .
 

Shreeyash123

New member
Apr 12, 2016
1
0
Recovery poblem

I am using yu yureka plus and i followed all the above steps to root but i cant replace the cyanogen recovery with custom recovery. Plz give the solution as soon as possible.
 

Stoner8141

New member
May 2, 2016
1
0
just one major problem with yu yureka plus rooted

One major problem of my yu yureka rooted is it gets locked automatically while in use

---------- Post added at 02:45 PM ---------- Previous post was at 02:42 PM ----------

i been trying to root my phone through your step but got stuck after i unlock my boot loader and give command for method 1 its showing me error like cant be found. please help me out if you could .
...
 

NiharSamal

New member
Jun 7, 2016
2
0
Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

Here is a noob friendly guide.

1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices

Type : adb reboot-bootloader
Your phone will restart into bootloader.

Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways

Method 1 : If you want to retain the Original Recovery - Hot boot

Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img

This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Method 2: If you want to flash Custom Recovery - Flash

Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img

Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Hit thanks/like if this helped
Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!

EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.

What is the procedure to root YU5510A i.e. Yureka Plus with stock android 4.4.4?
I am unable to root using the above procedure.
 

Rahul Gupta( Lucky)

New member
Jul 31, 2016
3
0
plzz help me....
my yureka plus yu5510 is not starting after rooted .....
firstly i rooted my phone and then phone is normally start .....but then i updated superuser app which is installed in rooting process.....
then my phone is going power off and then it's not starting and bootloader mode also is not starting .........
when i power on my phone yu logo is show and after 5 to 10 sec it will restart ......yu logo in loop system....
 
Last edited:

Sorptarn

Member
Jan 14, 2013
46
5
My yureka plus shows "waiting for device" when I enter command to check whether bootloader is unlocked or not...Plz help I'm stuck.

plzz help me....
my yureka plus yu5510 is not starting after rooted .....
firstly i rooted my phone and then phone is normally start .....but then i updated superuser app which is installed in rooting process.....
then my phone is going power off and then it's not starting and bootloader mode also is not starting .........
when i power on my phone yu logo is show and after 5 to 10 sec it will restart ......yu logo in loop system....


try this.........
if these doesn't work reply here

http://forum.xda-developers.com/yureka/help/unbrick-yureka-fastboot-100-t3105681
 

Samkumar148

New member
Jul 29, 2016
4
0
Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

Here is a noob friendly guide.

1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices

Type : adb reboot-bootloader
Your phone will restart into bootloader.

Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

sir please help me i have come to this point and than in cmd it says waiting for device. it does not show anything like this If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step.
plzz help me
 

vshnunni

New member
Oct 29, 2016
1
0
showing no load twrp.img

after entering the last command for flashing the twrp.img it is showing no load twrp.img. what shall i do to overcome this error.

---------- Post added at 06:26 AM ---------- Previous post was at 05:59 AM ----------

Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

Here is a noob friendly guide.

1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices

Type : adb reboot-bootloader
Your phone will restart into bootloader.

Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways

Method 1 : If you want to retain the Original Recovery - Hot boot

Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img

sir after this step it is showing error: cannot load TWRP_V2.8.7.0_YUREKA.img.
what shall i do to overcome this error.
 

buddyz

New member
Nov 4, 2016
1
0
error FAILED <remote: unknown command>

Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

Here is a noob friendly guide.

1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
2) Go to Developer Option and disable Update Recovery
3) Enable Android Debugging
4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
9) Shift+right click -> Open command prompt
Type : adb devices
If your device is connected you will get it in connected devices

Type : adb reboot-bootloader
Your phone will restart into bootloader.

Type : fastboot -i 0x1ebf oem device-info
If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

Type : fastboot -i 0x1ebf oem unlock
WARNING : All your userdata will be GONE! Now you can root your phone in two ways

Method 1 : If you want to retain the Original Recovery - Hot boot

Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img

This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Method 2: If you want to flash Custom Recovery - Flash

Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img

Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

Hit thanks/like if this helped
Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!

EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.

fastboot -i 0x1ebf oem device-info
error FAILED <remote: unknown command>
 

Top Liked Posts

  • There are no posts matching your filters.
  • 12
    Thanks to Nakum for the assistance. (Nakum can be found at drnakum on Yuforums or at dr.nakum on XDA) and to Mr.Anish for telling us that the latest TWRP recovery works.

    Ok guys, so Nakum succesfully managed to root the device and I was able to do so as well. The Procedure is similar to Yureka, except you use the latest TWRP version and the latest chainfire SU binary 2.46.

    This method can be done using a Hot boot or by flashing. If you want to retain the original recovery, do it by hotboot. If you want a vustom recovery, then flash it.

    Here is a noob friendly guide.

    1) Enable Developer Option (Go to Settings-> About Phone -> Tap on Build number 7 times)
    2) Go to Developer Option and disable Update Recovery
    3) Enable Android Debugging
    4) Install the 15-Second ADB driver file (http://forum.xda-developers.com/showthread.php?t=2588979)
    5) Download adb+fastboot zip (https://www.androidfilehost.com/?fid=95916177934556622)
    6) Download Su binaries (https://download.chainfire.eu/696/SuperSU)
    7) Copy UPDATE-SuperSU-v2.46.zip to an SD card
    8) Download TWRP (https://s.basketbuild.com/uploads/devs/vishal_android_freak/yu/yureka/TWRP_V2.8.7.0_YUREKA.img)
    8) Connect Phone to PC and navigate to the folder where you have abd+fastboot
    9) Shift+right click -> Open command prompt
    Type : adb devices
    If your device is connected you will get it in connected devices

    Type : adb reboot-bootloader
    Your phone will restart into bootloader.

    Type : fastboot -i 0x1ebf oem device-info
    If your bootloader is unlocked, it will say "True", else it will say "false". If it is False, then do the next step

    Type : fastboot -i 0x1ebf oem unlock
    WARNING : All your userdata will be GONE! Now you can root your phone in two ways

    Method 1 : If you want to retain the Original Recovery - Hot boot

    Type : fastboot -i 0x1ebf boot TWRP_V2.8.7.0_YUREKA.img

    This will launch TWRP on your device. Navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

    Method 2: If you want to flash Custom Recovery - Flash

    Type : fastboot -i 0x1ebf flash recovery TWRP_V2.8.7.0_YUREKA.img

    Your Cyanogen recovery will be replaced with TWRP. Then, unplug your device, hold volume up+down+power to boot into recovery, navigate to where you saved the UPDATE-SuperSU-v2.46.zip file. Flash it, wipe Cache, Reboot and you are rooted!

    Hit thanks/like if this helped
    Hope this helps! If you guys need any clarification, feel free to ping me!! Have fun!

    EDIT : For those stuck in a bootloop! After flashing TWRP, go to Wipe and hit Format Data...then reboot to recovery (everything will be mounted by now) and flash the chainfire SU binaries. Reboot and everything should work fine. The phone may be stuck in the "Cyanogen" screen for a goot 5-10 mins before the apps start loading...so stay patient.
    2
    Found the solution...!!!!!!!!!1

    Hey guys.... I also tried rotting my Yureka plus and after following everything, I get stuck on the bootloop... after wasting 3 hours on net, I tried some steps myself and it fixed the issue.

    Let me tell you the steps which I did:

    Switched off my Yureka.. took the memory card out....
    rebooted to TWRP recovery, I went to "wipe" > "format data"..
    Data was successfully foramtted.


    ALL DONE!!!!!!!!!

    Now, you will be able to mount data and flash SuperSU without any issues...
    It can take 4 to 5 minutes for the phone to start up (on the "Cyonogen" logo").

    If you are experiencing issues, you can email me at asksree24by @ gmail.com :)
    2
    I can't thank you enough for this mate! It worked! Would we be able to install updates by using TWRP? or would we have to flash the stock recovery once again? if that's the case, are you guys aware of any download links where I could install the Stock Recovery Image from?

    U cant flash official updates with twrp as far as i know.

    Stock recovery
    http://forums.yuplaygod.com/threads/stock-recovery-of-yureka-plus.20222/

    Sent from my YU5510 using xda premium
    1
    Wow wow champ...chill. Tell is what you did exactly and I will tell you how to recover your phone.
    1
    Btw this is for the others....just to show that rooting works.