[ZS570KL/ZS570KL PRO] UNLOCK/RELOCK BOOTLOADER UNOFFICIALLY FOR ZenFone 3 Deluxe

Status
Not open for further replies.

Saktis_STi

Senior Member
Jan 27, 2018
453
239
0
Kuala Lumpur
Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader

I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

First and foremost, please install ZenFone 3 Deluxe Drivers via Device Manager (Download drivers on ASUS Support Website)


1)Download the Factory RAW ROM here:

ZS570KL:

ZS570KL Pro:

2) Download ASUS Flash Tool here:

3) Flash the firmware via ASUS Flash Tool by entering FASTBOOT MODE (Power Button + Volume Up) & DO NOT WIPE DATA!

Note: If you flash RAW firmware via ASUS Flash Tool and received an error (FRP request error), just IGNORE the error.

4) Enter FASTBOOT mode (Power Off + Volume Up)

UNLOCKING​

5)
• Open Command Prompt/Windows Powershell
• Now copy and paste this: fastboot devices
• If it shows serial number of your ZenFone 3 Deluxe, you are good to go
• Now copy and paste this: fastboot oem unlock-go
• After that, re-enter FASTBOOT mode and paste this: fastboot oem device-info

Congratulations, your device has been unlocked unofficially. (You can see the "Device State: unlocked" on Command Prompt/Windows Powershell)

RELOCKING

5)
• Open Command Prompt/Windows Powershell
• Now copy and paste this: fastboot devices
• If it shows serial number of your ZenFone 3 Deluxe, you are good to go
• Now copy and paste this: fastboot flashing lock
• After that, re-enter FASTBOOT mode and paste this: fastboot oem device-info

Congratulations, your device has been locked (You can see the "Device State: locked" on Command Prompt/Windows Powershell)

P.S: If you unlocked officially and you want to relock your bootloader, OTA does not work because your Serial Number has been recorded by ASUS.

6) After that, download the stock RAW ROM here and flash it via ASUS Flash Tool (FASTBOOT Mode) (Turn on WIPE DATA):

ZS570KL:

ZS570KL Pro:

If anything, contact me via Telegram


Note: If you flash RAW firmware via ASUS Flash Tool and received an error (FRP request error), just IGNORE the error.

Note: If it asks for PIN after booting up, just wipe data & cache via Recovery Mode (Power Button + Volume Down).
 
Last edited by a moderator:

JaskoPtaszek

New member
Jun 18, 2018
2
0
0
.

Quote:
Originally Posted by JaskoPtaszek
I have zs570kl. I donload all aplications.
fastboot oem unlock-go
...
FAILED (remote: unknown command)
finished. total time: 0.005s

Did you flash Factory RAW at the 1st place?

Hello. You're right I did not do exactly point 1. Thanks for the quote. I have unlocked zs570kl.
Thank you very much.
 
Last edited:

tecnicopascoal

Senior Member
Oct 21, 2017
143
12
0
Make sure you’ve backed up all of your IMPORTANT DATA before unlocking/relocking bootloader

I am not responsible for bricked devices and dead SD cards. YOU are choosing to make these modifications, and if you point the finger at me for messing up your device, I will laugh at you.

First and foremost, please install ZenFone 3 Deluxe Drivers via Device Manager (Download drivers on ASUS Support Website)

1)Download the Factory RAW ROM here:

ZS570KL: Link

ZS570KL Pro: Link

2) Download ASUS Flash Tool here: Link

3) Flash the firmware via ASUS Flash Tool by entering FASTBOOT MODE (Power Button + Volume Up) & DO NOT WIPE DATA!

Note: If you flash RAW firmware via ASUS Flash Tool and received an error (FRP request error), just IGNORE the error.

4) Enter FASTBOOT mode (Power Off + Volume Up)

UNLOCKING

5)
• Open Command Prompt/Windows Powershell
• Now copy and paste this: fastboot devices
• If it shows serial number of your ZenFone 3 Deluxe, you are good to go
• Now copy and paste this: fastboot oem unlock-go
• After that, re-enter FASTBOOT mode and paste this: fastboot oem device-info

Congratulations, your device has been unlocked unofficially. (You can see the "Device State: unlocked" on Command Prompt/Windows Powershell)

RELOCKING

5)
• Open Command Prompt/Windows Powershell
• Now copy and paste this: fastboot devices
• If it shows serial number of your ZenFone 3 Deluxe, you are good to go
• Now copy and paste this: fastboot flashing lock
Everything work, but in fastboot flashing lock do not work. Help me I think this command is not right
 

the Doctor

Retired Senior Moderator
Dec 15, 2011
4,590
4,514
0
In the TARDIS
Per the forum rules, posting pay-per-click links on XDA is not allowed:

13. Advertising and Income Generation

Commercial advertising, advertising referral links, pay-per-click links, all forms of crypto-mining and other income generating methods are forbidden. Do not use XDA-Developers as a means to make money.

LINKS REMOVED AND THREAD CLOSED
 
Status
Not open for further replies.