zuk z1 fingerprint not working

[[email protected]]

Any one having same problem!! Having any solution to it!? And how can i calibrate it??

 

[strongst]

Any one having same problem!! Having any solution to it!? And how can i calibrate it??

This forum is intended to be for accessories only! Please ask in Q&A, there are already a ton of threads discussing your problem with solutions.

 

[rowihel2012]

Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?

 

[[email protected]]

Any one having same problem!! Having any solution to it!? And how can i calibrate it??what is your rom?

Stock cm12

Sent from my Moto G 2014 using XDA Labs

 

[AndroidGod1987]

Stock cm12

Sent from my Moto G 2014 using XDA Labs

Fingerprint is working like a charm, in all ROMs.

It must be your hardware issue, take it in Service Center

 

[shuhaibamariyil]

No I also have issue with finger print in mokke and nuclerom 7.1

 

[crossmanx]

just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....

---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------

this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..

download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/

full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/

after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely

 

[Gg49]

Any one having same problem!! Having any solution to it!? And how can i calibrate it??

Hello guys I have found a solution ?
Just download and flash the firmware from the link given below........on top of your nougat roms....the fingerprint option will be present once you flash this firmware.
Note: Works on nougat roms don't know about Oreo roms
https://androidfilehost.com/?fid=24351979186684091

 

[vishno2580]

I think in nougat ROMs you can separately download nougat ham firmware zip.

 

[Dhruvshelke588]

just flash zuk z1 cyanogenmod qfil flashable rom with qfil software.... your fingerprint sensor will work, definitely....

---------- Post added at 07:53 AM ---------- Previous post was at 07:48 AM ----------

this happens when you flash zui roms in zuk z1 , which is not preinstalled with ZUI. persist.mbn and rpm.mbn files are different in both the version. just flash cyanogen qfil rom..

download drivers:
http://www.androidbrick.com/download/qualcomm_diag_qd_loader_2016_qfil_driver/
http://www.androidbrick.com/downloa...one-usb-adb-qualcomm-diag-drivers-windows-10/

full guide and rom link is here:
http://www.androidbrick.com/lenovo-zuk-phones-qfil-roms-unbrick-guide/

after that unlock root and flash twrp recovery, and install lineageos or ressurection remix rom...fingerprint sensor will work definitely

Is this the rom where we get cyanogen 12.1 watermark??

 

[[email protected]]

Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x

 

[armuttaqin]

Gimana cara ngubah lenovo a1000 ke xiaomi note 4 x

please use english and this is Zuk Z1 forum

 

[mohith_23]

How can i resolve it bro.....fibgerprint option has been disappeared from settings

 

[strongst]

How can i resolve it bro.....fibgerprint option has been disappeared from settings

Please read both pages, answers are already given.

 

[windforce3425]

This was the reason I gave away this phone as the fingerprint homebutton is just a design flaw. not quite sure if you can get a replacement from AliExpress

 

[Suker1234]

I have the same issue.

It might be due to an installation of ZUI way back in time when i accidently bricked my phone. Guess the fingerprint isn't working anymore till then (it worked before for sure on Lineage OS 14.1).

What I tried so far:

1) I installed the firmware file from AOSP-Extended from https://forum.xda-developers.com/zuk-z1/orig-development/rom-aospextended-rom-v5-0-t3720542 and AOSP-Extended Oreo. But the fingerprint didn't work.

2) I installed then AOSP-Extedend Pie but no different result.

3) I used QFIL to install cm-12.1-YOG4PAS3AJ-ham-20151021-qpst from here http://lenovo-forums.ru/topic/19190-zuk-z1-qpst-cm-121-yog4pas3aj-ham-signed-factory-e66b382c5e/ becuase the link provided on site 1 links to androidbrick where the link to the rom doesnt work anymore. Unfortunately QFIL didn't solve the issue.

4) Then I tried flashing Lineage OS 14.1 and flashing the ham-mm-firmware from here https://androidfilehost.com/?fid=817906626617950254 which didn't work too.

5) I used QFIL to install Z1_CN_OPEN_USER_Q4275709.1_L_ZUI_0.9.084_ST_150729_qpst from here https://androidfilehost.com/?fid=24052804347826528 but the fingerprint couldn't be configured there too.

6) I tried installing ZUI_1.6.384_ST_160518_qpst from here http://lenovo-forums.ru/topic/19189-zuk-z1-qpst-z1_cn_open_user_q44301_m_zui_16384_st_160518/ but sadly the result was the same.

7) I tried using restor-capacitive-button from here https://androidfilehost.com/?fid=24269982087009655 and again no change.

Im pretty sure it's not a hardware defect because I really don't know how that should have happened.

Is there anything else I could do?