So FIRST OFF IM NOT RESPONSIBLE FOR SOFTBRICKS HARDBRICKS,DAMAGE TO VEHICLES,BLOWN MOTORS OR ANYTHING LIKE THAT!!!
ZVB And higher DO NOT ATTEMPT AS HARBRICK CAN AND WILL OCCUR
Again ZVC and ZVB. Do Not Use This Guide. There is no firmware to recover from
If you upgraded to zvb/zvc or higher when available do not use this.
You will be stuck in firmware update. No system no recovery.
First off go over here and thank this man for lgup and his patch for it
https://forum.xda-developers.com/member.php?u=4530191
Second download ZV8 kdz here----->
https://drive.google.com/file/d/0BxacnHqAaZbKTWtNd0U2eDJVRDg/view?usp=sharing
Im copying his post here for lgup up patched setup.
So do all of this first
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
Again thank this man hell thank em all
This is for full lgup options.
lgup version here>>>>>>>>
https://drive.google.com/file/d/0BxacnHqAaZbKSmJCaklVMUxQMWc/view?usp=sharing
lgup 8994 .dll version here>>>>>>>
https://drive.google.com/file/d/0BxacnHqAaZbKdmI3Nml3cHRSd1k/view?usp=sharing
lg up common .dll here>>>>>>>
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
lgup patch>>>>>
https://forum.xda-developers.com/attachment.php?attachmentid=4213482&d=1500215045
Note one of the .dlls are for the lg g4 but its needed.
MUST HAVE DOWNLOADED VERSIONS IN LINKS PROVIDED OR WONT WORK.
2. Prob a pretty good idea to do ure backups to sd card now. however u do them thats on you.
3. Factory reset.
4. Put g5 in download mode .
5. Open lgup and set to upgrade option select location of kdz and start.
6. Do not mess with it til device has fully rebooted.
7. success now back on ZV8
ZVB And higher DO NOT ATTEMPT AS HARBRICK CAN AND WILL OCCUR
Again ZVC and ZVB. Do Not Use This Guide. There is no firmware to recover from
If you upgraded to zvb/zvc or higher when available do not use this.
You will be stuck in firmware update. No system no recovery.
First off go over here and thank this man for lgup and his patch for it
https://forum.xda-developers.com/member.php?u=4530191
Second download ZV8 kdz here----->
https://drive.google.com/file/d/0BxacnHqAaZbKTWtNd0U2eDJVRDg/view?usp=sharing
Im copying his post here for lgup up patched setup.
So do all of this first
https://forum.xda-developers.com/showpost.php?p=73051003&postcount=32
Again thank this man hell thank em all
This is for full lgup options.
lgup version here>>>>>>>>
https://drive.google.com/file/d/0BxacnHqAaZbKSmJCaklVMUxQMWc/view?usp=sharing
lgup 8994 .dll version here>>>>>>>
https://drive.google.com/file/d/0BxacnHqAaZbKdmI3Nml3cHRSd1k/view?usp=sharing
lg up common .dll here>>>>>>>
https://mega.nz/#!TwNwUYwJ!ZTBcxmEkerLcp-2Ri66TOsZBf8LQl7qwoD2fmoJSCsc
lgup patch>>>>>
https://forum.xda-developers.com/attachment.php?attachmentid=4213482&d=1500215045
Note one of the .dlls are for the lg g4 but its needed.
MUST HAVE DOWNLOADED VERSIONS IN LINKS PROVIDED OR WONT WORK.
2. Prob a pretty good idea to do ure backups to sd card now. however u do them thats on you.
3. Factory reset.
4. Put g5 in download mode .
5. Open lgup and set to upgrade option select location of kdz and start.
6. Do not mess with it til device has fully rebooted.
7. success now back on ZV8
Last edited: