FORUMS

[ROM][UNOFFICIAL][10] LineageOS 17.1 [T713][T719][T813][T819]

3,040 posts
Thanks Meter: 5,335
 
By ripee, Recognized Developer / Recognized Contributor on 22nd March 2020, 12:36 AM
Post Reply Email Thread
Announcement from ripee: The cameras work, but with a delayed tap response, so not there yet :P

LineageOS is a free, community built, aftermarket firmware distribution of Android, which is designed to increase performance and reliability over stock Android for your device. All the source code for LineageOS is available in the LineageOS Github repo. If you would like to contribute to LineageOS, please visit our Gerrit Code Review.

Code:
 * Your warranty is now void.
 I am not responsible for bricked devices, dead SD cards,
 * thermonuclear war, or your getting fired because the alarm app failed. Please
 * do some research if you have any concerns about features included in this ROM
 * before flashing it! YOU are choosing to make these modifications, and if
 * you point the finger at us for messing up your device, I will laugh at you.
FREQUENTLY ASKED QUESTIONS
(Please read them BEFORE posting anything in the thread!)

Q: Whenever I try flashing any lineage-17.1 build, I get the following error in TWRP: Updater process ended with ERROR: 7
A: This error appears whenever you try to flash an Oreo-based rom within a version of TWRP older than 3.3. Simply flash the linked below version 3.3 or higher, reboot back into recovery, and flash the rom zip again.

Q: Will any of the variants ever receive official builds from LineageOS?
A: In short, no. As with Pie, the LTE variants suffer from an inability to make voice calls over the mobile connection. Luk1337 had looked over many of the logs generated by T719 and T819 users, and he could not figure out the cause of this bug. In fact, this very issue prevented T713 or T819 from receiving official lineage-16.0 support, while T713 and T813 did. SMS and mobile data work, so something is better than nothing.

Q: How often will new builds be released?
A: At least once per month: as soon as possible after each new Android security patch level is merged and whenever a new feature is added or a bug is fixed.


ROMs
ripee
- SM-T713: gts28vewifi

- SM-T719: gts28velte

- SM-T813: gts210vewifi

- SM-T819: gts210velte

Open GApps

Magisk


If your currently installed ROM is any version of either: stock Samsung TouchWiz, LineageOS, CyanogenMod, or any other custom ROM, you must perform a clean install of that LineageOS 17.1 variant, which corresponds to the model of your tablet!


How to flash LineageOS and Open GApps

FULL WIPE (with external microsd card)
1. Move any files you want to keep to your External MicroSD Card – ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the external MicroSD storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Internal Storage, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner,
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!


FULL WIPE (without external microsd card with NO Home PC access)
1. Move any files you want to keep to a safe folder - ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the internal storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!


FULL WIPE (without external microsd card with Home PC access)
1. Move any files you want to keep to your Home PC - ! Or you will lose them !
2. Download your LineageOS Rom and GApps Package,
3. Move your LineageOS Rom and GApps Package to the internal storage,
4. Boot into Recovery Mode,
5. Wipe > Advanced Wipe > Select On (enable tick) for Dalvik / Art Cache, System, Data, Cache,
6. Swipe to Wipe at Bottom of Screen,
7. Back to Main start screen,
8. Wipe > Format Data,
9. Type 'Yes' and press blue checkmark at the bottom-right corner,
10. Go Back to Main Start Screen to Install Rom and GApps,
11. After you have finished installing the Rom and GApps > Wipe Cache/Dalvik > Swipe to Wipe,
12. Reboot System! Enjoy!
13. Once first boot is completed you can safely move your files back onto your Internal Storage.


Typically if you do not do a Clean Install then you are not allowed to report errors or problems. If you Dirty Install and you do have problems then you will be asked to Wipe All and Clean Install and see if the problems still exist. This is a DAILY changing rom and any bug that you found was not working on the previous day's build may be fixed with todays daily build. On a side note, the code implemented to fix that bug could potentially break something that worked on that previous build. So reporting problems on a day old build that you dirty flashed over whichever build of whichever rom you had flashed previously will not be accepted as a true error.

Problems known to happen after a Dirty Installation

1. A muddled up mess of a system. You are taking a rom and installing a newer rom with changes over the top of your old rom. Between these two periods of time during which you used your tablet and created data, changed system options, and used apps. This is absolutely increasing the risk of causing problems somewhere in the system/data partitions. Some people have luck with Dirty Flashing. However, it's always hit-and-miss because of what we mentioned above about bug fixes breaking previously working functions. Dirty flashing doesn't only create problems if the source code of the system data and the system settings of the new build are significantly different from those of your previous build. That's not to say that Clean Installing won't ever create problems, but only bugs present on a Cleanly Installed rom are relevant for development purposes.

* Clean Install: Fully wiping everything and installing the rom onto a fully clean system/data partition of the tablet.

* Dirty Install: Installing the rom and GApps over top of the older rom to save time and not have to reinstall all the user apps and tweaking system and app settings that usually take a lot of time to set up as you like.


Bugs
- The cameras work, but with a delayed response, so they are impractical to use.
- T719 & T819: RIL does not work at all.
- You tell us!

Changelog
All major features and bug fixes are discussed in detail by the developer in the thread, whenever they are implemented. All builds include the latest upstream Changes for all devices from LineageOS.

Credits
- Luk1337 and every other open source developer and tester who contributes directly or indirectly to the LineageOS community in the development of and in providing feedback for the gts28velte, gts28vewifi, gts210velte, and gts210vewifi.

Sources
- LineageOS
- samsung-msm8976

XDA:DevDB Information
LineageOS 17.1, ROM for the Samsung Galaxy Tab S2

Contributors
ripee
ROM OS Version: Android 10
ROM Kernel: Linux 3.10.x

Version Information
Status: Stable
Current Stable Version: 10
Stable Release Date: 2020-03-25

Created 2020-03-21
Last Updated 2020-03-25
The Following 26 Users Say Thank You to ripee For This Useful Post: [ View ]
22nd March 2020, 12:36 AM |#2  
ripee's Avatar
OP Recognized Developer / Recognized Contributor
Thanks Meter: 5,335
 
Donate to Me
More
Reserved
Join us on Telegram!

LineageOS is part of the Tab S2 ROM Universe, courtesy of Skulldron.
The Following 6 Users Say Thank You to ripee For This Useful Post: [ View ]
22nd March 2020, 12:36 AM |#3  
ripee's Avatar
OP Recognized Developer / Recognized Contributor
Thanks Meter: 5,335
 
Donate to Me
More
Reserved
TWRP 3.3.1-1

The official TWRP for all four variants is built by TeamWin's servers from the outdated android-6.0 branch. A major bug in this branch is that mtp is broken, so I ran my own builds from the android-7.1 branch. However, I had to disable hw encryption to fix the building error, which is why I bumped the version number up to "-1":

twrp-3.3.1-1-gts210velte.img
twrp-3.3.1-1-gts210velte.tar

twrp-3.3.1-1-gts210vewifi.img
twrp-3.3.1-1-gts210vewifi.tar

twrp-3.3.1-1-gts28velte.img
twrp-3.3.1-1-gts28velte.tar

twrp-3.3.1-1-gts28vewifi.img
twrp-3.3.1-1-gts28vewifi.tar
The Following 10 Users Say Thank You to ripee For This Useful Post: [ View ]
22nd March 2020, 12:46 AM |#4  
fjason@iprimus.com.au's Avatar
Member
Gold Coast, Australia
Thanks Meter: 4
 
More
it says lineageOS 17.1 but when you click on the google drive link it links to a file that says 16
22nd March 2020, 12:52 AM |#5  
ripee's Avatar
OP Recognized Developer / Recognized Contributor
Thanks Meter: 5,335
 
Donate to Me
More
Quote:
Originally Posted by [email protected]

it says lineageOS 17.1 but when you click on the google drive link it links to a file that says 16

It is building right now, and I am going to sleep. It will finish building and uploading before I wake up.
The Following 5 Users Say Thank You to ripee For This Useful Post: [ View ]
22nd March 2020, 01:21 AM |#6  
Senior Member
Thanks Meter: 477
 
More
Quote:
Originally Posted by ripee

It is building right now, and I am going to sleep. It will finish building and uploading before I wake up.

Awesome. Glad to see this tablet still getting attention.

@ripee Your link above to the T813 goes to your GTS210wifi (exynos) folder, and not the GTS210VEWifi (snapdragon) folder. I'm going to assume these are different Roms?

I think the GTS210wifi was the T810? Going off this page? (LOS Github link)
22nd March 2020, 03:58 AM |#7  
fjason@iprimus.com.au's Avatar
Member
Gold Coast, Australia
Thanks Meter: 4
 
More
you are just linking us to the wrong folder I found the build and the camera isn't working for me not sure if it's me or you right now...
22nd March 2020, 06:48 AM |#8  
ab-samy's Avatar
Senior Member
Thanks Meter: 205
 
More
Quote:
Originally Posted by [email protected]

you are just linking us to the wrong folder I found the build and the camera isn't working for me not sure if it's me or you right now...

It is already mentioned in bug section.
22nd March 2020, 10:28 AM |#9  
Senior Member
Thanks Meter: 1,332
 
More
The OpenGapps link points to ARM instead of ARM64.

---------- Post added at 10:28 AM ---------- Previous post was at 10:21 AM ----------

Quote:
Originally Posted by [email protected]

you are just linking us to the wrong folder I found the build and the camera isn't working for me not sure if it's me or you right now...

Which variant? T719 (gts28velte) does not boot at all.
22nd March 2020, 10:32 AM |#10  
fjason@iprimus.com.au's Avatar
Member
Gold Coast, Australia
Thanks Meter: 4
 
More
Quote:
Originally Posted by fmc000

The OpenGapps link points to ARM instead of ARM64.

---------- Post added at 10:28 AM ---------- Previous post was at 10:21 AM ----------



Which variant? T719 (gts28velte) does not boot at all.

SM-T713 - gts28vewifi

I had to try a few different gapps to get it working bitgapps seems to do the trick for me
22nd March 2020, 10:45 AM |#11  
ginore's Avatar
Senior Member
Flag Mantova
Thanks Meter: 29
 
More
Error 7 whit TWRP 3.3.1-0 with lineage-16.0-20200311-UNOFFICIAL-gts28ltexx

ROMs
ripee
- SM-T713: gts28vewifi

- SM-T719: gts28velte <---------- lineage-16.0-20200311-UNOFFICIAL-gts28ltexx

- SM-T813: gts210vewifi

- SM-T819: gts210velte

SM-T719
---error 7.....
E3004: this package is for device gts28lte, gts28ltexx; yhis device is gts28velte.

????????
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes