lgup

Hi everyone, Yesterday I start an Android System update on my Lg Velvet LM-G900EM while it was connected to the pc in transfer file mode: it shutted down like it normally does but it didn't turn up. The screen is full black and I've tried different button presses on the phone but nothing seems...

Hi there ;) Thanks to all other guys here who have made helpful development to tame this beautiful =) To crossflash models other than LG G8 please read post 3. Before asking any question please read the troubleshooting section at the bottom of the page. If you still need some specific help I...

Hey guys, i always had issues with getting LGUP to work correctly, so therefore i just made an installer that installs everything in one package. LGUP_Common.dll should work for devices above the LG G6. For any problems with it, don't hesitate to contact me. Contents: LGUP LG Mobile drivers...

As mentioned, I get the 'you have to select a known model, please' error when trying to install the most up-to-date stock ROM for h870 when using LGUP (with UPPERCUT). Right now I'm on HavocOS (A11) and SkyHawk Recovery. I tried using LG drivers 4.8.0 and 4.5.0 on Windows 10. Any thing to check...

Hi, I was attempting to flash my V20 (F800S model) with LGUP and Uppercut some days ago. The flashing got to 12% then stalled and eventually timed out and stopped completely after an hour or so. Tried it again, and got the same result. I then disconnected the phone from the PC and force-shut...

Hello everyone, I have a European H870 and unlocked the bootloader, used ADB/FASTBOOT to install TWRP but could never get to start in recovery because of a warning screen that shows up because it is unlocked. Couldn't get into recovery from both ADB or by utilizing the keypress method...

I recently purchased a LG G8 (LM-G820UM) from China. It is an AT&T branded phone, but works perfectly with my current UK SIM. It is running Android 9 (Software Version: G820UM10m), but when I try to update to Android 10 it says, "Current software is up to date." I am used to updating the...

I have an unlocked AT&T V30 H931 that I've been using on Verizon with a stock Verizon Oreo ROM. I got a prompt this morning saying System Update 14 was ready to install, so I accepted the update. It proceeded to update until it got stuck on the white Verizon boot screen with the animated dots. I...

Delete This Please! Go here instead: https://forum.xda-developers.com/lg-v40/how-to/guide-lgup-root-t3967858

I have a V20 with a non-functioning screen. It boots fine, but as the touchscreen is not working, I cannot unlock it in order to access my data. I can also boot to download mode and grabbed a dump from LGUP. For the life of me I cannot get into recovery. Is there anyway to...

I have all day trying to solve this problem, I did an update for the Verizon application and now I am in the download mode, I want to recover it using LGUP but it says that the model is unknown, I used uppercut, installed the different .exe of the dll , and nothing. I'm about to EXPLODE AND...

Hello everyone, I have an LG Tribute HD that fails to flash with LGUP. The firmware it has according to the PC is ZV5, however, the firmware shown when on is ZVB (the system is glitchy most likely because of the mismatch, which is why I am trying to flash it back). Phone shows up perfectly in...

hello, followed some "convert LG G7 USA to international" guides but has left my G710VM @ firmware update screen store version 1.14 with DLL Version 1.0.36.10 error: 0x4, not support cross model download G710VM to G710 @ 4% using G710VMX10k_00_USC_US_OP_0117.kdz or...

Alright so, I've managed to uppercut down to 13a from 1ca, unlock the bootloader, install twrp. Never installed supersu, but when the phone booted to twrp I installed the magisk zip with no errors. After booting the magisk manager never showed up as installed. Installed it manually, ran it, said...

Sharing collected and semi-patched version of LGUP which working without uppercut and also show Dev setting for T Mobile LG G6 ( H872 ) . Yet to learn the settings in details - you may can help. Download: https://mega.nz/#!OJRnRAhT!cfv5nGP1pLLy_IcTHizU4r9xErMP9g6PoKr7WioNNuk And then execute...

Hi! I have an LG G6 H873 model. I wanted to flash the new oreo kdz that I have downloaded and stored. But looks like whenever I try to open LGUP software, I get error stating "LGUP can't load the model[C:\ProgramFiles(x86)\LG Electronics\LGUP\model\com" http://prntscr.com/kg8txh Anyone know...

Please don't ignore this thread, I have tried all guides and methods. Still Stuck: So, I have LG G2 F320S (32GB). Only Download Mode is working: Shows User B890 and ROOTED. I can't flash any kdz file using LG Flash Tool 2014: It gives error at 2% (Searched all about it, Some people say driver...

i'm fed up i have tried this [Non F500]Downgrade nougat back to MM this H815 Nougat Stock [v29A][Int. variant][Official] or even this one UPPERCUT: Add Any LG Device to LGUP for TOT/KDZ Flashing 0x2000 this goddam error i got every time i attempt to downgrade nougat 29a to lp or mm(i already...

I have an O2 UK H870 and I'd like to use UPPERCUT & LGUP to replace the O2 software with an open GB/European software version. I have the KDZ on my computer. I've already used UPPERCUT, but I selected 'Upgrade' and although it has upgraded my software to V11i-234-10, it's still showing as the...

Guide: How to upgrade/downgrade/restore OFFICIAL firmware on your V30. Requirements: LG V30 Windows PC Official Firmware file for your V30 ending with .kdz. You can find it here https://forum.xda-developers.com/lg-v30/development or here https://lg-firmwares.com/ Bootloader does not need...

Before reading any further This thread is best viewed in a browser! Mobile apps may parse the XDA formatting not correctly and may screw things up. About steadfasterX's All-in-one LG Tool (SALT) SALT is able to communicate with your device while in download mode and provides these...

After LGup procedure my phone is not booting on. I tried different kdz and it doesn't work.What should it do? It stuck on lg logo,that light moves,so it not a bootloop but i'm waiting like an hour.

In this thread - Update LG G4 H818P to android 7 by LG-H815 Official v29A. hochocnua upgrade H818P to v29A using the LG Poland Official v29A firmware zip which comes from here. And this thread, I'll guide you upgrade your H815 Locked-Bootloader to the v29A. oh.. okay, I almost forgot the...

So it was only a matter of time before I managed to hard brick my phone. Wouldn't you know it, I'm with one of the only carriers to not have a KDZ available?! #%^&^! I was trying to update TWRP, but after flashing the phone went to the red triangle screen, then LG screen, then turned off...

:confused: I was running a MarshMallow update for the last 6 months and suddenly today morning I just decided to flash the "rootedsystemh960a.tot" from one of the forums here at XDA. First it did flashed the ROM using LGUP but then the Phone was stuck with LG LOGO for minutes and then I flashed...

First of all there is a guide already for some devices made by pvineeth97 so if you have one of those devices, you better use his description: http://forum.xda-developers.com/lg-k10/how-to/guide-upgrade-downgrade-lg-k10-t3488250 Secondly this guide is not meant to be providing kind of a "one...

I am trying to reflash the zv5 update. I want to start fresh one last time on this device. I have downloaded LG UP (from Autoprime thread), the 8994 dll msi, and proper drivers. LG UP says my device is Unknown even tho it lists LS992 next to the port info on the initial screen. I cannot get...

Hi everyone, I am not able to flash a "Middle East" KDZ for H860 over my phone which is H860 but with Taiwan Stock ROM. The phone is new; no rooting, no oem unlock, nothing. The current ROM version is 10e and I want to flash the AME KDZ which is basically 10g. Using the patched version of...

Hello, has passed a lot of time since my last thread. This time, I'm requesting your help about something that every time I read a related thread turns more complicated. I just want to know if I can flash CyanogenMod 13 or another custom ROM if I have an LG G4 with official Android Marshmallow...

I used LGUP to try to get back to lollipop. I followed the guide here. Once the processes got to 33% I got this error error:error code = 0x2000,g_hDFcommondll fail. I cant do anything. If I try the process again it fails at the same spot. I don't know what to do. Do I unplug my phone even though...

okay guys, so, problem trying to downgrade my LG G4 H815T thats currently running 6.0 to 5.1 due to crap battery life. now, heres the problem when i attempt to use LGUP as said in the forums, it comes up with this error: DLL for H81520D is not installed properly. Please, install a DLL package...

Hello I'm currently on V10o-AME-xx (middle east) using an unlocked D855. I'm currently rooted and only have xposed on there, no custom recovery. What I want to do is remove the root and get a fresh new phone while still being on kitkat. I started looking around and found this method...