mi a3

My mi A3 was bricked after the Android 11 update , i unbricked it twice using flash tool and test point method through edl then when the device was on , i updated it through system update , thinking that the update might remove the corrupted firmware and my device will not be bricked again ...

Hi, after trying to install TWRP recovery through adb the phone got stuck in fastboot mode. Then I tryed to flash stock rom through Mi flash tool. Then the mobile phone wouldn´t turn on. Now ot is in EDL mode. By PC it is recognised as Qualcom COM port. Flashing through Mi Flash or QFIL didn´t...

/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to...

Issue

/* * Your warranty is now void. * * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to...

Hello. I can't seem to be able to send or receive SMS messages after uninstalling Google play services through Universal Android Debloater. Everything works fine after i restore the said package. Tested it with the preinstalled Google messaging app (which would be expected to not work), AOSP...

Hi there! I'm really bored and was wondering if i could boot my mi a3 out of the SD card, not because my eMMC is dead, just because i'm bored and it sounds like a fun(and painful) adventure to boot a phone out of the SD card. Any help will be appreciated!

Hi there! I recently installed the Android 12 gsi(+gms) from google. So far im loving it, but i have a few issues and need some help Audio stuttering(fixed by using https://forum.xda-developers.com/t/magisk-module-gsi-audio-stutter-fix-for-mi-note-10-lite-toco.4125893/) No VoLTE(managed to...

Hi, I beg your help. Well what happened is, I was on CORVUS OS, then I thought of rolling back to stock rom. So after flashing "laurel_sprout_global_images_V12.0.21.0.RFQMIXM_11.0" using Mi Flash tool (clean and unlock), My phone said to me "This device has been destroyed". So I thought I might...

/* * Your warranty is now void. * * Syberia Team not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are...

i installed corvus os on Xiaomi Mi A3. After the process is completed i rebooted my phone and its not starting. no power on (my battery was 100% when i installed corvus os) cant just turn on the phone is the phone hard bricked. or how can i fix it

" #DroidOnTime " ROM Version: 5.2 Device: laurel_sprout Maintainer: Mahmoud Suleiman Build Status: UNOFFICIAL * Your warranty is now void. * We are not responsible for anything that may happen to your phone by installing any custom ROMs and/or kernels. * You do it at your own risk and...

I Downloaded LineageOS (Unofficial) from this link => https://sourceforge.net/projects/harukeys-roms/files/laurel/LineageOS18/, Wiped everything with TWRP, ADB pushed the file from my pc and flashed it with TWRP, the OS booted normally, but WIFI didn't work, so I decided to reboot the phone, now...

I present to you: Kali NetHunter for the Xiaomi Mi A3 on LineageOS 18.1 Kali NetHunter is an Android ROM overlay that turns an ordinary phone into the ultimate Mobile Penetration Testing Platform. The overlay includes a custom kernel, a Kali Linux chroot, an accompanying Android application...

NOTE: THIS IS ONLY FOR A10 FIRMWARE, DO NOT FLASH ON A11 FIRMWARE UNLESS YOU WANT A HARD BRICK Standard Disclaimer:- * Your warranty is... still valid? * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please...

My mobile won't turn on or enter fastboot after doing the process to use the global rom

I tried installing custom rom in mi a3 it is saying system is destroyed. I tried installing new global version, it is not working .When checked the bootloader it is false,Please help me anyone, this is my phone i have purchased.I will be very thankfull if anyone can help me out..

Hello all, Is there any possible way to downgrade mi a3 global variant to Android 10 from Android 11 ? Somehow I don't like unstable buggy Android 11 update please help me to downgrade if any one knows how to do it Thanks in advance

NOTE: THIS IS ONLY FOR A10 FIRMWARE, DO NOT FLASH ON A11 FIRMWARE UNLESS YOU WANT A HARD BRICK Standard Disclaimer:- * Your warranty is... still valid? * I am not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please *...

Hey, I need Some help ASAP, I am in a Big trouble. So The whole scenario is that I decided to install the Paranoid Android 11 in my Mi A3 and After Unlocking the Bootloader, I changed the Boot Slot from A to B and Flashed the Twrp file ( to the boot ) and Pressed the Power and Volume down...

LineageOS is a free, community built, aftermarket firmware distribution of Android 10 (Q), which is designed to increase performance and reliability over stock Android for your device LineageOS is based on the Android Open Source Project with extra contributions from many people within the...

I unlocked bootloader and installed SHRP Custom recovery in my Mi A3 using pc in fastboot mode. Then I saw a thread in XDA, which has Android 11 custom ROM for Mi A3. I flashed it in my Mi A3 using same SHRP Custom recovery. After flashing I noticed that bluetooth is not working, couldn't...

I finally found out where the (boot splashes) are located in MI A3. Its in the imagefv.elf file found in the stock firmware image. Extract it via 7zip and you get three files named 0, 1 and 2 Just extract 2 file with 7zip and you will find them I have attached the screenshot showing the file...

Is the ROM good for daily driver? can someone guide me on how to install shrp recovery..? or any link i can follow on flashing shrp recovery. Then ill try out this rom.

Instructions: 1. Upload File to Magisk 2. Restart 3. In case it doesn't work, manage the permissions manually. No fix for 48Mpx needed. Bugs: There are no or unknown. Running: Wide angle 2x Slow motion Video and wide-angle video Panoramic selfie 48Mpx and 32Mpx Portrait mode And more. Note...

Team Win Recovery Project 3.x, or twrp3 for short, is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about...

So, i've been using MiUI 11 on my A3 for a few weeks, and i have to say, it's flawless. Before that, on every phone i had i always used AOSP ROMs, and i'm impressed with this one. The last MiUI i used was probably version 9 on my RN4 mido, and they have gone very far with the improvements...

I don't know if it's just happening to me, but after upgrading to Android 10 the system really got faster, but after an average of 24 hours of use and especially after loading it 100% again, the whole system and apps seem like start to lock up, you can see a huge difference in the speed at which...

Hi everyone, I just got my Mi A3 today and successfully installed the official TWRP image with this guide. After that I did an OTA Update to the current Android 9 Build. Okay. Now i have a working phone: SLOT A: TWRP SLOT B: Stock Recovery + Rom (all though i thought it would be the other way...

I purchased the Xiaomi Mi A3 Android One phone, and I was wondering if Android One and Pixel Experience ROM are different enough to be worth rooting and installing the custom ROM Pixel Experience. Or are Android One and Pixel Experience the same or so similar that there would not be much...

I received the buggy OTA update of Android 10 on My Device... Later i Downgraded to Android 9 using Official Stock Rom Flash Image. Since then, none of my sensors are working.. They are not even detected using the *#*#6484#*#* menu... How can i solve this issue??? Thanks In Advanced.

Hello friends, I will ask you a few questions! 1-) My guess is that the Android 10 update will be available this week. Do you think Mi A3 will support Dynamic system update (DSU)? 2-) And will Android R beta open for Mi A3? Thanks to everyone who answered my questions! :D

Hello, I am having some battery problem. I am currently on 10.3.12.0 (EU) build,( before that i was on 10.3.11.0 (EU)) which i flash directly via twrp, because i was not able to get the ota update, it always failed to install. Yes i followed the instructions for ota with magisk. Since the...

Has anyone tried Ainur Sauron or Narsil on the Mi A3? I'm considering trying it, but I'd like to avoid messing the phone up just yet. Magisk user, btw

Hey guys, now we have a working recovery. The MI A3 is supported from Project Treble. Someone have tried some roms? Partition A/B! Please report here, so finally we can start the modding for this phone

:cowboy: Hey guys! I've just bought this Mi A3 last night! Now I'm thinking of getting a case and screen protector to keep it safe. So I want to know if the fingerprint scanner will work propperly when I get to install a screen protector on the display...Do you guys use screen protectors? Does...