qfil

Hello. I wanted to flash .elf or otherwise stock firmware over QFIL, but I don't know how to find it on the internet... Please help, I'm stuck in endless boot loops in every ROM I try to flash for miA1 and I think only a proper install via EDL would work now.

Hello, I bricked my phone and it did not give any sign of life, nor fastboot mode, neither recovery nor turned on, it was dead. I got to work and created a homemade EDL cable in a few minutes, now the phone connects to the pc as EDL QFIL, I only need the ROM EDL file to flash it with the...

Hi, Is there anyway to extract the rom with extension ofp to install it using QFIL or QPST? I can't find anywhere how to do it :'(. Thank you!

Hi guys. I'm a Lenovo Z6 Pro owner and recently I've been looking for guides or whatever to learn how to build stock ROMs to be installed with QFIL. I have all the partitions image files and I have a "QFIL ROM" for my device as example (programmer firehose included) but I don't know how to...

Procedure For Flashing/recovering your Garlic using QFIL/QPST Tool REQUIREMENTS : -A working PC. -Qualcomm Drivers. -QFIL Tools (I'd prefer and recommend ver2.0.05 as it is much more efficient than the newer ones) *Required .Net Framework 4.5 or higher -ADB Drivers (just in case if your phone...

Hi, recently I hardbricked mi Mi5s. After reading and trying a lot of things, I managed to unbrick it. So, I left this as a guide of things to try in case someone else hardbricks it. How did I brick it: I was trying to fix finger sensor by flashing in EDL mode fastboot ROMS, in order to...

I was just reinstalling the stock android ROM of my Lenovo K920 but accidentaly I downloaded a K910 ROM and installed it by QFIL. Now my smartphone won't boot at all, all shortcuts like VOLUME+/VOLUME- won't do anything to the smartphone and therefore I can't now enter QFIL mode (if i click on...

How to convert dumped firmware from cm2qlm to flash with qpst?

Mod Edit: Content removed. Thread closed.

rom.gizchina.it/upload/R1/R1_user_V6.0.0.rar rom.gizchina.it/upload/R1/R1_user_V6.0.4.rar rom.gizchina.it/upload/R1/R1_user_V6.1.0.rar rom.gizchina.it/upload/R1/R1_user_V6.6.0_TNT.rar You must use a EDL CABLE for flash these firmware roms. Just launch the file edl-flash.bat and wait I need...

hey developers. i need some expert advice about my phone, my phone is of lenovo model no. x3a40 (lenovo vibe x3). It got hard bricked last week, so i try to flash the stock rom using qfil and it flashed successfully still the phone won't boot up. Their are 3 stock rom versions, i tried them all...

I could do with a little help here. All day I've beed trying to flash a stock image on my Lenovo P8 8703F. Background P8 was running s000032 but I wanted the latest firmware s000034 which is now available OTA but the system partition was modified and twrp 3.2.1 was installed. I reverted...

/* * We are not responsible for bricked devices, dead SD cards, * thermonuclear war, or you getting fired because the alarm app failed. Please * do some research if you have any concerns about features included in this ROM * before flashing it! YOU are choosing to make these modifications...

So I have had this issue since the beginning that I can't restore rom backups I make via twrp. I asked on some threads about it but nothing helped. Now I'm thinking I'll start from scratch and try my luck. But when I used qfil to flash the Z2132_EN_OPEN_USER_Q01080.2_N_ZUI_2.5.104_ST_170418_qpst...

I have a Lenovo A6020a40 (SD 616 version), and I'm trying to flash stock ROM, but no success. Tried to flash with QFIL, but I'm getting this error: ERROR: function: sahara_rx_data:237 Unable to read packet header. Only read 0 bytes. ERROR: function: sahara_main:924 Sahara protocol error ERROR...

All credits for this go to tora33, c/p from here, he tested it himself, and confirmed it working. This should bring back your bricked phone from the dead, it's a low level flash procedure, meaning don't play around with it unless absolutely necessary, IT WILL WIPE YOUR PHONE CLEAN! Charge your...

Hope this is the right place to post. My redmi 4x suddenly died yesterday after 2 months of regular use. I'm not able to enter fastboot nor adb, the display stays blank, no led or notification whatsoever. I installed QFIL and qualcomm drivers (QDLoader). Both QFIL and MIFlash are able to see...

NOTE-1: I'm not a developer or something even near to that. All information provided here is copied from different internet sources and according to best of my knowledge. I have tried this on QMobile Z8 only. It's similar to Wiko Ridge 4G and Blu Life One (2015) in hardware specifications. I'll...

I got this error while flashing my lg g4 h810 marshmallow version bricked with QFIL software can some plz help me with this ??? plzz???:crying: Start Download Program Path:C:\Users\Desmond\Desktop\RecoveryImage\prog_emmc_firehose_8992_lite.mbn COM Port number:12 Sahara Connecting ... Sahara...

I have been trying to recreate one from scratch, but I am hoping that someone might be able to find one buried in our stock imgs somewhere. Also, if anyone knows if our device is using firehose or the sahara protocol, that might help a bit.

I'm using Lenovo Vibe X3 ROW x3c40. It uses a snapdragon 808 processor shipped with Android 5.1.1. I got a stock ROM. And I'm able to flash it through sdfuse folder in external SD. But I'm not able to do it via QFIL. I followed almost every guide but has been a failure so far. And this could be...