qpst

SITUATION: hello , My phone is an asus x014d. recently I switched it off , and it just would not boot up again. when i press the power on button it shows "powered by android" then the "asus" logo. PROBLEMS: - I CANNOT ENTER RECOVERY MODE (by doing the power on + vol up) - I CANNOT ENTER TO...

Hello everyone, I have a European H870 and unlocked the bootloader, used ADB/FASTBOOT to install TWRP but could never get to start in recovery because of a warning screen that shows up because it is unlocked. Couldn't get into recovery from both ADB or by utilizing the keypress method...

Hi, Is there anyway to extract the rom with extension ofp to install it using QFIL or QPST? I can't find anywhere how to do it :'(. Thank you!

OK, I got 2 nexus 6p QCN backup files. I restored it successfully. Still, I got unknown baseband and null IMEI number. I try to restore the same QCN file but I got an error. It says "Received an invalid command from the phone" (Image Attached). I tried it in QPST and QFIL. (one of the QCN file I...

Hi guys, last night i bricked my phone, so i needed to install ZUI 1.9 QPST, i want to back to android 10 custom ROMs, but now when a flash im getting E1001: Failed to update system image. Updater process ended with ERROR: 7 my procedures were: install ZUI 1.9 QPST > Unlock bootloader > Flash...

Has anyone managed to enable the Full-Port Switch on a Realme Device yet? This is needed to configure the LTE Modem to enable a matching carrier profile that supports VoLTE. I have the Qualcomm QPST PDC programm and know how to do it on a Oneplus device. But I can't enable serial mode and the...

i am on LineageOS 16 and want to enable Carrier Aggregation and when i enter the cmd in termux "setprop sys.usb.config diag,adb" nothing happens and i'm using windows 10 for it. MiA1 showing in device manager with yellow mark and when i manually install driver qpst manager detect com port but it...

Hello guys, This is my problem, basically playing with the root I lost my IMEI's (I have a backup in .xqcn format) but every time I try to restore it the baseband appears undefined. (no signal, no mobile data, no life :() I know this is related to the original QCN file and I don't know if you...

How to convert dumped firmware from cm2qlm to flash with qpst?

Hi guys, Would someone share QPST backup file for Mi Note 2? I kinda messed up the NVRAM, now LTE does not work anymore. If anyone can share theirs it would be awesome. or if anyone know how to fix this issue I really appreciate it. Thanks

Hello guys, I badly need your help in fixing the issue I have encountered recently. I was trying to edit a value in the NVRAM of my MI NOTE 2 using QXDM where I want to enable a specific Band but I have mistakenly written 0 as a value in the NVRAM. The cellular signal began to go crazy turning...

Hey guys, So thanks to this thread : https://forum.xda-developers.com/pixel-2-xl/how-to/guide-qxdm-port-activation-pixel-2-xl-t3884967 I got my com ports open (see attached photo) I cant however get past the part about pdc , as pdc gives me "QMI connection not ready, please use USB driver...

Hey I want to run QPST and my phone is detected in the COM in device manager (also at the top of device manager). But when i add the port in QPST it detects 'No phone' but i can still add the port. Making a backup etc in QPST doesn't work because of this. Anyone with more knowledge who knows...

Mod Edit: Content removed. Thread closed.

Hi I need to modify several parameters on my Pixel 2 XL to enable 256 QAM and VoLTE. To do so i have to have the diagnostic port to be enabled open on my XL. So basically right now i am looking for AOSP rom without any mods\tweaks and other crap. Simple AOSP rom which has been build with...

Can htc 10 use the QPST?? I want to work something to my htc 10. So I need the QPST. Answer please~!!!

I was recently attempting to unlock more LTE bands because this model doesn't have LTE compatibility in the states. Long story short, the IMEIs and MEID were deleted when trying to unlock more bands. I still have the IMEI numbers from the box, but the MEID is nowhere to be found. Even if it...

Hi, I'm using htc 10 unlocked & international version. I want to add some code(?) so called "TTA-VOLTE" to my htc 10 to use VOLTE in S.korea. So I should some work by using QPST. Someone saying 'htc doesn't support QPST'. My main Question is here. Does htc 10 support QPST??

DISCLAIMER: I'M NOT RESPONSIBLE IF YOU BREAK YOUR PHONE OR MODEM, ONLY DO THIS IF YOU KNOW WHAT YOU'RE DOING! First you'll need: SAMSUNG USB Driver QXDM https://androidmtk.com/download-qpst-flash-tool Now follow the quick start guide HERE, skipping steps 12-30. 1. open QXDM.exe and go to NV...

Warning !!!! Don’t curse me if you end up with a paperweight ! Well, You tried to flash your phone ? Wow flashed your Vivo at home, that’s amazing.:D but you loosed :( all IMEI & SN data causing network issues, don’t panic dude, i’m always here to help you:).:cool: In this guide, I’m going...

I'm trying enable extra 3G and 4G bands for my LG G3 F460. Can edit with QPST, but stuck with QXDM. Stupid thing is that after NV read, I can NV write, but I find no options to edit the values before the write!! I'm not sure if the version I have is defective or sth, so I hope someone here...

Dear Xiaomi Redmi 4 Prime User. A Guy Name Dragonii Requested For a QCN File. and its Procedure. So now you Guys can restore IMEI by the Following Guide. 1: Download IMEI Converter. 2: Download QPSTQPST from here. 3: Download ADB Fastboot drive. 4: Download Qualcomm Driver. 5: Download...

Hey I really appreciate any help that you can provide. I will tell the long story. My phone got corrupted while flashing different custom ROMs. Oxygen was the culprit. It completely damaged all the partition of my phone. So I repaired via 9008 modem loader using COLOR OS flash tool. then I found...

Hi, I searched a lot,but couldn't find a specific answer. Is it possible to do QCN backup and restore using QPST successfully?Can anyone please confirm it? or is it just not supported by QPST tool like nexus devices?

I have been trying to recreate one from scratch, but I am hoping that someone might be able to find one buried in our stock imgs somewhere. Also, if anyone knows if our device is using firehose or the sahara protocol, that might help a bit.

Hi everyone, i need help to figure it out how to activate the diagnostic mode, it is suposed that i dial some code and its done but i tried with too many codes and no ones work! I need to activate RMDIS + DM + MODEM to use qpst and unlock my cellphone bands. This is a post that i found but i...

Got Xiaomi Mi Max 3/32GB (Qualcomm Snapdragon 650, MSM8952/8956). Via SIM2, all bands are accessible - 2G/3G/4G. Any compatible network can be used via SIM2. Via SIM1, only 4G bands are accessible. No 2G/3G networks are visible in manual selection. In "Preferred network type", only "Prefer...

Hello I am interested on learning about these tools. However the information available online is really lacking. Anyone can provide me a good in depth understandable information about these tools? Thanks

Hello I am interested on learning about these tools. However the information available online is really lacking. Anyone can provide me a good in depth understandable information about these tools? Thanks

I've been trying and trying and trying to enter in my MSID and MDN number to my Sprint One but nothing seems to work. I've tried via EPST (using both ##MSL# and ##3282#) and whenever I change either of those two options and Commit changes, it says "Commit Failed". I've tried through PC with...

I'm using Lenovo Vibe X3 ROW x3c40. It uses a snapdragon 808 processor shipped with Android 5.1.1. I got a stock ROM. And I'm able to flash it through sdfuse folder in external SD. But I'm not able to do it via QFIL. I followed almost every guide but has been a failure so far. And this could be...

Hello I have a OnePlus 2 phone that I never modified in anyway. I tried the dual SIM feature at the beginning and it worked perfectly. However, after I had to do a manual network change on the second SIM (it's an international SIM) the dual SIM feature stpped working and now only one of them...

Hi, Did anyone got QPSt working with Nubia z9 mini. i'm stuck with null IMEI can anyone help with getting this fixed? Thanks, Dilkush

Hi because I have hardbricked device I just want to play with it so my question is if there is someone who can provide me this backup? link to how to http://montecarlophone.co.uk/orange-monte-carlo/unlock-for-free/install-qpst-create-backup-qcn-file/ this is only for users who know what they...

Hello. Currently I'm using Pantech IRON(IM-A870L) and he is having a Error that is known as Hardbrick or QHSUSB_DLOAD. Before he was having a critical error, he had some symptoms and I've made some modifications that may be non-secured. Symptom: No mountable partitions. Unable to get through...

I know that it was foolish of me to not fully research this set of commands I have copied the before and after of tit all from the command line. I was attempting to mess around with my phone with QPST. I know, I can REALLY REALLY make things hideous if I don't tread carefully with QPST, but I am...

I'm a happy One M8 user since June '14, never had an issue (except for the camera lens scratch, which I was able to reapir thankfully to the XDA community) but there's one thing that always bother me, I have no 4G support. I live in Brazil and here we use the 2600MHz (IMT-E) band for LTE, but...

I know there is not much support for the remix, though it's essentially a mini 2...too. I have it s-off and unlocked. I have twrp recovery on it. The all in one utility on one of these threads didn't work well for twrp so I flashed it via fast boot. I've tried running the utility for gaining...

My Xperia E c1604 hardbricked around a year back. (No LED , no vibration etc, only proximity sensor shows small lit. Phone is showing in PC as QFHSUSB_DLOAD device). Now I am trying to bring it back to life using QPST .( A tool by Qualcom ), For that i need hex file and mbn file of the chipset...

hi, my watch is not booting and is shown as qhsusb_bulk device in win7 device manager. It's visible with QPST. Maybe I'm not alone and someone already had such issue and debricked it's watch?

Hi all, I would like to share with you the latest build I've found of QPST, it is version 2.7 build 419. This not my personal work, I just found it online a couple of days ago. It seems to be legit and it does not contain any viruses (checked with Virustotal.com) enjoy...

How can I change the ESN? I have a Fascinate, ooooooooold, that allowed me to do so easily via ##DATA#. Between QPST and Fastboot oem writemeid/imei, I was able to move over some of the variables, but I cannot seem to find a way to do so for the ESN (or pESN). I found some methods using QXDM...

Hello. I have a Lg L5 with brick. not turn on the screen, does not vibrate, no emergency mode, not recovery. KDZ does not recognize it. but it is detected as Qualcomm HS-USB-QDLoader 9008 so peek into QPST and found that you can fix it. and I have all the files you request, I only need the...

I am trying to make changes to my AT&T SGS5 to enable T-Mobile bands, so that I can get HSPA+ instead of EDGE off of my non-refarmed tower. This would be similar to the process of restoring a changed QCN to effect NV programming like they were able to do on SGS4 (see this YouTube link...

Hi, i have a bricked Nexus 7 flo (2013 Wifi) After plug-in USB i have Qualcomm HS-USB QDLoader 9008. Bootloader is broken, no-way to go bootloader or fastboot only Download mod via Qualcomm HS-USB with QPST tool. But, i haven't needed files only i have 8064_msimage.mbn, MPRG8064.hex What should...

Hello I managed to pickup a G3 from sprint but dont have an MSL/Service code. Is there a way to enable the Diag mode so that the phone can be detected in DFS for programming I have tried the commands from http://forum.xda-developers.com/showthread.php?t=2049701 but not sure if these work as I...

i've been trying to get qpst (build 4.2.2) to recognize my galaxy mega sph-l600, but for the life of me i cant figure out how to do it, nor can i find a solid tutorial or any information really on how to do it. i've tried finding it with both CDMA MODEM and PDA in PhoneUtil (##3424#) with every...

Hello XDA lords, ladies and others... I've found endless threads of users stuck in QHSUSB_DLOAD mode on this forum with some pretty solid ways of recovering from it. Most people are dismayed by this mode appearing on booting their phones, but not me. I may be the only lunatic wanting to get...

After using QPST for my Dad's Inc4g it has 2 odd cellular problems. #1 It can make outgoing calls for a few minutes. But then it says that the “phone number is not active or invalid” (like it’s not activated). Then the only call it can make is to 611 (data and wifi off), but it gives me his...