Quick Charge 3.0 issue

39 posts
Thanks Meter: 0
By LondonVirus, Member on 22nd May 2020, 07:54 PM
Post Reply Email Thread
Hi all,

The last couple of weeks I am having issues charging my phone (HTC U12+), at first I thought it was the charge or the wire, today I got the Mrs phone, which is the same as mine, brought on the same day directly from HTC, running the same firmware, then I got a few different charges, some Quick Charge 2.0 Samsung Genuine, and some Quick Charge 3.0, HTC genuine, and a variaty of good quality wires, and they all work as expected on her phone, Quick Charge 3.0 charged fine up to about 3000mA, I plugged in my phone, at first it shows about 2500mA, that's with the Quick Charge 3.0 chargers, then withing less then a minute I goes down to about 1000mA, and it shows high mV and high temp, please see attached screenshot, the app I have used and always use to test it all is AccuBattery Pro, and by the way do do know that tge battery charges slow for the last 20% or so, but as you can see in the screenshot the battery is bellow that, and when I started the test the battery was at about 25%...

Is the battery on the way out or what?


PS: The image didn't seem to have loaded,
The Google drive link for the image is:
23rd May 2020, 02:06 AM |#2  
OP Member
Thanks Meter: 0
27th May 2020, 09:32 PM |#3  
Flag Eindhoven
Thanks Meter: 14
Well, charge speed depends on several parameters.
If your battery is pretty full it's going to slow down charging.
The fastest charge I seem to get is when it's really low on juice.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Previous Thread Next Thread
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes