TWRP 3.0.0-0

84 posts

Thanks Meter: 41

Hi,

PLEASE VISIT THE CORRECT AND OFFICIAL THREAD HERE. THIS THREAD WILL NO LONGER BE UPDATED.

As some of you may know, @beroid has a TWRP 3.0.0-0 which he released on his Unofficial CM13 thread. I was unaware of this but lukily (thanks to @yasteellutch) I was told about this new TWRP. So, if you are looking for it, or are unaware of it because you dont look through the original thread, well here it is and now you know!

Installing
Go the download link here and you will be presented with two files.

FOR CURRENT TWRP USERS:
Download the zip file and flash it within TWRP. Your device should reboot automaticly into the new TWRP.

FOR NEW USERS:
Download the img file and place it in your platform-tools folder on your pc. Then reboot your device in fastboot. Then, open a command window in that folder and run commands:

Code:

fastboot -i 0x2970 erase recovery

- IF YOU GET WAITING FOR (ANY) DEVICE SKIP TO NEXT PART

Then enter

Code:

fastboot -i 0x2970 flash recovery recovery.img

Disconnect the device from your computer. Then remove the battery. Then replace the battery and press VOLUME DOWN and POWER to rebbot in to recovery mode to verify the installation. IF YOU DONT, IT WONT WORK!

IF YOU GET WAITING FOR DEVICE:
Do the same commands but without the vendor id eg.

Code:

fastboot erase recovery
fastboot flash recovery recovery.img

Credits to:
@beroid for making this. IT IS ALL @beroid's WORK!

So, now you know about TWRP 3.0.0-0!

SCREENSHOTS:

-Jev

Quick Reply Reply

The Following 3 Users Say Thank You to jevtheboss For This Useful Post: [ View ] Gift jevtheboss Ad-Free

29th March 2016, 02:21 PM |#2

Junior Member

Thanks Meter: 0

Hello,

Thank you, I have used it since few weeks without problem. But your TWRP build doesn't seem to include encryption support. TWRP asks for the password but it can't decrypt data partition. Is there some kind of missing module or this is not officially support by TWRP 3 ?

Quick Reply Reply

29th March 2016, 03:30 PM |#3

Senior Member

Thanks Meter: 111

Quote:

Originally Posted by jevtheboss

Hi,

As some of you may know, @beroid has a TWRP 3.0.0-0 which he released on his Unofficial CM13 thread. I was unaware of this but lukily (thanks to @yasteellutch) I was told about this new TWRP. So, if you are looking for it, or are unaware of it because you dont look through the original thread, well here it is and now you know!

Installing
Go the download link here and you will be presented with two files.

FOR CURRENT TWRP USERS:
Download the zip file and flash it within TWRP. Your device should reboot automaticly into the new TWRP.

FOR NEW USERS:
Download the img file and place it in your platform-tools folder on your pc. Then reboot your device in fastboot. Then, open a command window in that folder and run commands:

Code:

fastboot -i 0x2970 erase recovery

- IF YOU GET WAITING FOR (ANY) DEVICE SKIP TO NEXT PART

Then enter

Code:

fastboot -i 0x2970 flash recovery recovery.img

Code:

fastboot erase recovery
fastboot flash recovery recovery.img

Credits to:
@beroid for making this. IT IS ALL @beroid's WORK!

So, now you know about TWRP 3.0.0-0!

SCREENSHOTS:

-Jev

Not sure if -i 0x2970 is needed for fastboot think its only for fastboot oem
No need for battery removal there is a fastboot command ........fastboot reboot......... that does the same thing

Quick Reply Reply

6th April 2016, 09:44 PM |#4

OP Member

Manchester

Thanks Meter: 41

Quote:

Originally Posted by dnahc

Hi,
Please could you visit the thread here and ask the question there. I think TWRP 3.0.1 will fix the issue.

If not, on the TWRP website, 3.0.2 has been released which is supposed to fix some decryption issues so please wait for the thread (the one I linked to earlier) to be updated