FORUMS
Remove All Ads from XDA

Enable LTE bands in US

3 posts
Thanks Meter: 0
 
By rmbanas, Junior Member on 13th August 2016, 06:22 AM
Post Reply Email Thread
So I purchased this phone while in the UK because it looked like a solid item. Unfortunately, I neglected to realize that the default LTE bands were EU and the phone will not work in the US other than on 2G.

In the meantime... I've spent the entire day setting up the appropriate tools to modify the NV values in 6828/29 to enable the appropriate LTE bands (2,4,12) for my carrier here in the US. I've wrote these values successfully, however, no LTE. These are the only two NV values I've modified.

Is this possible? Or is there something I'm missing here and the phone chipset/radio is not configurable in this manner and requires either some other attention, or that I'm screwed.

Thanks for any insight.
 
 
13th August 2016, 08:25 AM |#2  
robin0800's Avatar
Senior Member
Thanks Meter: 111
 
More
Try *#*#4636#*#* which should show you network types available and if your lucky set the one you want
13th August 2016, 07:33 PM |#3  
OP Junior Member
Thanks Meter: 0
 
More
I see that LTE is an option here; but the radio picks nothing up. This phone comes from the factory stamped on the box with LTE bands 3/7/20 enabled.

Perhaps I should rephrase the question:

Does editing the NV values do anything, or is the radio hardware limited to specific frequencies? Or is there a way to flash a ROM or something that's not editable (i.e. via QXDM) to fix this problem? It seems like the chipsets are all the same from phone to phone, so something 'soft' must be limiting the band selection.

I'd hate to have to buy another phone simply for the fact I'm limited to 2G connectivity. I love how the government and cell phone manufacturers have the consumer's best interest in mind.

Quote:
Originally Posted by robin0800

Try *#*#4636#*#* which should show you network types available and if your lucky set the one you want

16th August 2016, 10:30 AM |#4  
Member
High Wycombe
Thanks Meter: 6
 
More
Quote:
Originally Posted by rmbanas

I see that LTE is an option here; but the radio picks nothing up. This phone comes from the factory stamped on the box with LTE bands 3/7/20 enabled.

Perhaps I should rephrase the question:

Does editing the NV values do anything, or is the radio hardware limited to specific frequencies? Or is there a way to flash a ROM or something that's not editable (i.e. via QXDM) to fix this problem? It seems like the chipsets are all the same from phone to phone, so something 'soft' must be limiting the band selection.

I'd hate to have to buy another phone simply for the fact I'm limited to 2G connectivity. I love how the government and cell phone manufacturers have the consumer's best interest in mind.

It should be hardware limitation of the chipset. LTE band support can be problematic even on high-end devices (there will be at least one band missing).
If you are in the US, why not take advantage of the Blu R1 HD deal? It's not very helpful but it's something
17th November 2016, 04:32 AM |#5  
Junior Member
Thanks Meter: 0
 
More
Quote:
Originally Posted by rmbanas

So I purchased this phone while in the UK because it looked like a solid item. Unfortunately, I neglected to realize that the default LTE bands were EU and the phone will not work in the US other than on 2G.

In the meantime... I've spent the entire day setting up the appropriate tools to modify the NV values in 6828/29 to enable the appropriate LTE bands (2,4,12) for my carrier here in the US. I've wrote these values successfully, however, no LTE. These are the only two NV values I've modified.

Is this possible? Or is there something I'm missing here and the phone chipset/radio is not configurable in this manner and requires either some other attention, or that I'm screwed.

Thanks for any insight.

Hi rmbanas, how do you did it? I followed the guide from here but QPST does not recognize my device. Now Im stuck.
Im speaking from Brazil and Im trying to enable some LTE and GSM bands.
Ive unlocked the bootloader, flashed the CyanogemMod 13, released the developer settings (so as USB debbuging, etc, etc).

Certainly, it is a problem with the drivers, but Ive tried with a lot of them and still... nothing.
Post Reply Subscribe to Thread

Guest Quick Reply (no urls or BBcode)
Message:
Previous Thread Next Thread